From ea273e8d72e994ea2403570bad7737e23cca593f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 18 Jun 2018 04:09:10 +0200 Subject: [PATCH] ARM: dts: rmobile: Move the PHY reset GPIOs into PHY nodes Both the RAVB and SH ether driver now support parsing the PHY reset GPIOs from both the PHY nodes and the MAC nodes, move the reset GPIOs back into the PHY nodes to minimize DT difference between U-Boot and Linux. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- arch/arm/dts/r8a77970-eagle.dts | 2 +- arch/arm/dts/salvator-common.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/r8a77970-eagle.dts b/arch/arm/dts/r8a77970-eagle.dts index 5b8b2f8..5dcad63 100644 --- a/arch/arm/dts/r8a77970-eagle.dts +++ b/arch/arm/dts/r8a77970-eagle.dts @@ -39,13 +39,13 @@ phy-handle = <&phy0>; phy-mode = "rgmii-id"; status = "okay"; - reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index 21dbb21..a36e0eb 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -257,7 +257,6 @@ pinctrl-names = "default"; phy-handle = <&phy0>; phy-mode = "rgmii-txid"; - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; status = "okay"; phy0: ethernet-phy@0 { @@ -265,6 +264,7 @@ reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; };