commit
ee1702d75a
@ -0,0 +1,32 @@ |
||||
|
||||
#
|
||||
# Author: Grzegorz Bernacki, Semihalf, gjb@semihalf.com
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk |
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS := $(BOARD).o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) |
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
clean: |
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean |
||||
rm -f $(LIB) core *.bak .depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk |
||||
|
||||
sinclude $(obj).depend |
||||
|
||||
#########################################################################
|
@ -0,0 +1,24 @@ |
||||
#
|
||||
# Author: Grzegorz Bernacki, Semihalf, gjb@semihalf.com
|
||||
#
|
||||
|
||||
#
|
||||
# digsyMTC board:
|
||||
#
|
||||
# Valid values for TEXT_BASE are:
|
||||
#
|
||||
# 0xFFF00000 boot high (standard configuration)
|
||||
# 0xFE000000 boot low
|
||||
# 0x00100000 boot from RAM (for testing only)
|
||||
#
|
||||
|
||||
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp |
||||
|
||||
ifndef TEXT_BASE |
||||
## Standard: boot high
|
||||
TEXT_BASE = 0xFFF00000
|
||||
## For testing: boot from RAM
|
||||
# TEXT_BASE = 0x00100000
|
||||
endif |
||||
|
||||
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
|
@ -0,0 +1,307 @@ |
||||
/*
|
||||
* (C) Copyright 2003 |
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||
* |
||||
* (C) Copyright 2004 |
||||
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. |
||||
* |
||||
* (C) Copyright 2005-2009 |
||||
* Modified for InterControl digsyMTC MPC5200 board by |
||||
* Frank Bodammer, GCD Hard- & Software GmbH, |
||||
* frank.bodammer@gcd-solutions.de |
||||
* |
||||
* (C) Copyright 2009 |
||||
* Grzegorz Bernacki, Semihalf, gjb@semihalf.com |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <mpc5xxx.h> |
||||
#include <net.h> |
||||
#include <pci.h> |
||||
#include <asm/processor.h> |
||||
#include <asm/io.h> |
||||
#include "eeprom.h" |
||||
#include "is42s16800a-7t.h" |
||||
|
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
extern int usb_cpu_init(void); |
||||
|
||||
#ifndef CONFIG_SYS_RAMBOOT |
||||
static void sdram_start(int hi_addr) |
||||
{ |
||||
long hi_addr_bit = hi_addr ? 0x01000000 : 0; |
||||
long control = SDRAM_CONTROL | hi_addr_bit; |
||||
|
||||
/* unlock mode register */ |
||||
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000); |
||||
|
||||
/* precharge all banks */ |
||||
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002); |
||||
|
||||
/* auto refresh */ |
||||
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004); |
||||
|
||||
/* set mode register */ |
||||
out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE); |
||||
|
||||
/* normal operation */ |
||||
out_be32((void *)MPC5XXX_SDRAM_CTRL, control); |
||||
} |
||||
#endif |
||||
|
||||
/*
|
||||
* ATTENTION: Although partially referenced initdram does NOT make real use |
||||
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if |
||||
* CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. |
||||
*/ |
||||
|
||||
phys_size_t initdram(int board_type) |
||||
{ |
||||
ulong dramsize = 0; |
||||
ulong dramsize2 = 0; |
||||
uint svr, pvr; |
||||
#ifndef CONFIG_SYS_RAMBOOT |
||||
ulong test1, test2; |
||||
|
||||
/* setup SDRAM chip selects */ |
||||
out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001C); /* 512MB at 0x0 */ |
||||
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */ |
||||
|
||||
/* setup config registers */ |
||||
out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); |
||||
out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); |
||||
|
||||
/* find RAM size using SDRAM CS0 only */ |
||||
sdram_start(0); |
||||
test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000); |
||||
sdram_start(1); |
||||
test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000); |
||||
if (test1 > test2) { |
||||
sdram_start(0); |
||||
dramsize = test1; |
||||
} else { |
||||
dramsize = test2; |
||||
} |
||||
|
||||
/* memory smaller than 1MB is impossible */ |
||||
if (dramsize < (1 << 20)) |
||||
dramsize = 0; |
||||
|
||||
/* set SDRAM CS0 size according to the amount of RAM found */ |
||||
if (dramsize > 0) { |
||||
out_be32((void *)MPC5XXX_SDRAM_CS0CFG, |
||||
(0x13 + __builtin_ffs(dramsize >> 20) - 1)); |
||||
} else { |
||||
out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */ |
||||
} |
||||
|
||||
/* let SDRAM CS1 start right after CS0 */ |
||||
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize + 0x0000001C); |
||||
|
||||
/* find RAM size using SDRAM CS1 only */ |
||||
test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), |
||||
0x08000000); |
||||
dramsize2 = test1; |
||||
|
||||
/* memory smaller than 1MB is impossible */ |
||||
if (dramsize2 < (1 << 20)) |
||||
dramsize2 = 0; |
||||
|
||||
/* set SDRAM CS1 size according to the amount of RAM found */ |
||||
if (dramsize2 > 0) { |
||||
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, (dramsize | |
||||
(0x13 + __builtin_ffs(dramsize2 >> 20) - 1))); |
||||
} else { |
||||
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */ |
||||
} |
||||
|
||||
#else /* CONFIG_SYS_RAMBOOT */ |
||||
|
||||
/* retrieve size of memory connected to SDRAM CS0 */ |
||||
dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF; |
||||
if (dramsize >= 0x13) |
||||
dramsize = (1 << (dramsize - 0x13)) << 20; |
||||
else |
||||
dramsize = 0; |
||||
|
||||
/* retrieve size of memory connected to SDRAM CS1 */ |
||||
dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF; |
||||
if (dramsize2 >= 0x13) |
||||
dramsize2 = (1 << (dramsize2 - 0x13)) << 20; |
||||
else |
||||
dramsize2 = 0; |
||||
|
||||
#endif /* CONFIG_SYS_RAMBOOT */ |
||||
|
||||
/*
|
||||
* On MPC5200B we need to set the special configuration delay in the |
||||
* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM |
||||
* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: |
||||
* |
||||
* "The SDelay should be written to a value of 0x00000004. It is |
||||
* required to account for changes caused by normal wafer processing |
||||
* parameters." |
||||
*/ |
||||
svr = get_svr(); |
||||
pvr = get_pvr(); |
||||
if ((SVR_MJREV(svr) >= 2) && |
||||
(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) |
||||
out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04); |
||||
|
||||
return dramsize + dramsize2; |
||||
} |
||||
|
||||
int checkboard(void) |
||||
{ |
||||
char *s = getenv("serial#"); |
||||
|
||||
puts ("Board: InterControl digsyMTC"); |
||||
if (s != NULL) { |
||||
puts(", "); |
||||
puts(s); |
||||
} |
||||
putc('\n'); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int board_early_init_r(void) |
||||
{ |
||||
/*
|
||||
* Now, when we are in RAM, enable flash write access for detection |
||||
* process. Note that CS_BOOT cannot be cleared when executing in |
||||
* flash. |
||||
*/ |
||||
/* disable CS_BOOT */ |
||||
clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25)); |
||||
/* enable CS1 */ |
||||
setbits_be32((void *)MPC5XXX_ADDECR, (1 << 17)); |
||||
/* enable CS0 */ |
||||
setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16)); |
||||
|
||||
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) |
||||
/* Low level USB init, required for proper kernel operation */ |
||||
usb_cpu_init(); |
||||
#endif |
||||
return (0); |
||||
} |
||||
|
||||
void board_get_enetaddr (uchar * enet) |
||||
{ |
||||
ushort read = 0; |
||||
ushort addr_of_eth_addr = 0; |
||||
ushort len_sys = 0; |
||||
ushort len_sys_cfg = 0; |
||||
|
||||
/* check identification word */ |
||||
eeprom_read(EEPROM_ADDR, EEPROM_ADDR_IDENT, (uchar *)&read, 2); |
||||
if (read != EEPROM_IDENT) |
||||
return; |
||||
|
||||
/* calculate offset of config area */ |
||||
eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYS, (uchar *)&len_sys, 2); |
||||
eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYSCFG, |
||||
(uchar *)&len_sys_cfg, 2); |
||||
addr_of_eth_addr = (len_sys + len_sys_cfg + EEPROM_ADDR_ETHADDR) << 1; |
||||
if (addr_of_eth_addr >= EEPROM_LEN) |
||||
return; |
||||
|
||||
eeprom_read(EEPROM_ADDR, addr_of_eth_addr, enet, 6); |
||||
} |
||||
|
||||
int misc_init_r(void) |
||||
{ |
||||
uchar enetaddr[6]; |
||||
|
||||
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { |
||||
board_get_enetaddr(enetaddr); |
||||
eth_setenv_enetaddr("ethaddr", enetaddr); |
||||
} |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
#ifdef CONFIG_PCI |
||||
static struct pci_controller hose; |
||||
|
||||
extern void pci_mpc5xxx_init(struct pci_controller *); |
||||
|
||||
void pci_init_board(void) |
||||
{ |
||||
pci_mpc5xxx_init(&hose); |
||||
} |
||||
#endif |
||||
|
||||
#ifdef CONFIG_CMD_IDE |
||||
|
||||
#ifdef CONFIG_IDE_RESET |
||||
|
||||
void init_ide_reset(void) |
||||
{ |
||||
debug ("init_ide_reset\n"); |
||||
|
||||
/* set gpio output value to 1 */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25)); |
||||
/* open drain output */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25)); |
||||
/* direction output */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25)); |
||||
/* enable gpio */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); |
||||
|
||||
} |
||||
|
||||
void ide_set_reset(int idereset) |
||||
{ |
||||
debug ("ide_reset(%d)\n", idereset); |
||||
|
||||
/* set gpio output value to 0 */ |
||||
clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25)); |
||||
/* open drain output */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25)); |
||||
/* direction output */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25)); |
||||
/* enable gpio */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); |
||||
|
||||
udelay(10000); |
||||
|
||||
/* set gpio output value to 1 */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25)); |
||||
/* open drain output */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25)); |
||||
/* direction output */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25)); |
||||
/* enable gpio */ |
||||
setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); |
||||
} |
||||
#endif /* CONFIG_IDE_RESET */ |
||||
|
||||
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) |
||||
void ft_board_setup(void *blob, bd_t *bd) |
||||
{ |
||||
ft_cpu_setup(blob, bd); |
||||
} |
||||
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ |
||||
|
||||
#endif /* CONFIG_CMD_IDE */ |
||||
|
@ -0,0 +1,32 @@ |
||||
/*
|
||||
* (C) Copyright 2009 Semihalf. |
||||
* Written by: Grzegorz Bernacki <gjb@semihalf.com> |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the anty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
* |
||||
*/ |
||||
#ifndef CMD_EEPROM_H |
||||
#define CMD_EEPROM_H |
||||
|
||||
#define EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR |
||||
#define EEPROM_LEN 1024 /* eeprom length */ |
||||
#define EEPROM_IDENT 2408 /* identification word */ |
||||
#define EEPROM_ADDR_IDENT 0 /* identification word offset */ |
||||
#define EEPROM_ADDR_LEN_SYS 2 /* system area lenght offset */ |
||||
#define EEPROM_ADDR_LEN_SYSCFG 4 /* system config area length offset */ |
||||
#define EEPROM_ADDR_ETHADDR 23 /* ethernet addres offset */ |
||||
|
||||
#endif |
@ -0,0 +1,28 @@ |
||||
/*
|
||||
* (C) Copyright 2004-2009 |
||||
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#define SDRAM_MODE 0x00CD0000 |
||||
#define SDRAM_CONTROL 0x505F0000 |
||||
#define SDRAM_CONFIG1 0xD2322900 |
||||
#define SDRAM_CONFIG2 0x8AD70000 |
||||
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in new issue