diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
index 1f3031d..a4d291d 100644
--- a/arch/arm/mach-bcm283x/Kconfig
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -6,6 +6,10 @@ config BCM2836
 	bool "Broadcom BCM2836 SoC support"
 	depends on ARCH_BCM283X
 
+config BCM2837
+	bool "Broadcom BCM2837 SoC support"
+	depends on ARCH_BCM283X
+
 menu "Broadcom BCM283X family"
 	depends on ARCH_BCM283X
 
@@ -50,11 +54,28 @@ config TARGET_RPI_2
 	select BCM2836
 	select CPU_V7
 
+config TARGET_RPI_3_32B
+	bool "Raspberry Pi 3 32-bit build"
+	help
+	  Support for all BCM2837-based Raspberry Pi variants, such as
+	  the RPi 3 model B, in AArch32 (32-bit) mode.
+
+	  This option assumes the VideoCore firmware is configured to use the
+	  mini UART (rather than PL011) for the serial console. This is the
+	  default on the RPi 3. To enable the UART console, the following non-
+	  default option must be present in config.txt: enable_uart=1.
+
+	  This option creates a build targetting the ARMv7/AArch32 ISA.
+	select ARMV7_LPAE
+	select BCM2837
+	select CPU_V7
+
 endchoice
 
 config SYS_BOARD
 	default "rpi" if TARGET_RPI
 	default "rpi_2" if TARGET_RPI_2
+	default "rpi_3_32b" if TARGET_RPI_3_32B
 
 config SYS_VENDOR
 	default "raspberrypi"
@@ -65,5 +86,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "rpi" if TARGET_RPI
 	default "rpi_2" if TARGET_RPI_2
+	default "rpi_3_32b" if TARGET_RPI_3_32B
 
 endmenu
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index d31a79c..20b5cf4 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2012-2013,2015 Stephen Warren
+ * (C) Copyright 2012-2016 Stephen Warren
  *
  * SPDX-License-Identifier:	GPL-2.0
  */
@@ -18,6 +18,7 @@
 #include <asm/arch/sdhci.h>
 #include <asm/global_data.h>
 #include <dm/platform_data/serial_pl01x.h>
+#include <dm/platform_data/serial_bcm283x_mu.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -30,6 +31,7 @@ U_BOOT_DEVICE(bcm2835_gpios) = {
 	.platdata = &gpio_platdata,
 };
 
+#ifdef CONFIG_PL01X_SERIAL
 static const struct pl01x_serial_platdata serial_platdata = {
 #ifndef CONFIG_BCM2835
 	.base = 0x3f201000,
@@ -44,6 +46,18 @@ U_BOOT_DEVICE(bcm2835_serials) = {
 	.name = "serial_pl01x",
 	.platdata = &serial_platdata,
 };
+#else
+static const struct bcm283x_mu_serial_platdata serial_platdata = {
+	.base = 0x3f215040,
+	.clock = 250000000,
+	.skip_init = true,
+};
+
+U_BOOT_DEVICE(bcm2837_serials) = {
+	.name = "serial_bcm283x_mu",
+	.platdata = &serial_platdata,
+};
+#endif
 
 struct msg_get_arm_mem {
 	struct bcm2835_mbox_hdr hdr;
diff --git a/board/raspberrypi/rpi_3_32b/MAINTAINERS b/board/raspberrypi/rpi_3_32b/MAINTAINERS
new file mode 100644
index 0000000..bc9df87
--- /dev/null
+++ b/board/raspberrypi/rpi_3_32b/MAINTAINERS
@@ -0,0 +1,6 @@
+RPI_3_32B BOARD
+M:	Stephen Warren <swarren@wwwdotorg.org>
+S:	Maintained
+F:	board/raspberrypi/rpi_3_32b/
+F:	include/configs/rpi_3_32b.h
+F:	configs/rpi_3_32b_defconfig
diff --git a/board/raspberrypi/rpi_3_32b/Makefile b/board/raspberrypi/rpi_3_32b/Makefile
new file mode 100644
index 0000000..78e2874
--- /dev/null
+++ b/board/raspberrypi/rpi_3_32b/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2012-2016 Stephen Warren <swarren@wwwdotorg.org>
+#
+# SPDX-License-Identifier:	GPL-2.0
+#
+
+obj-y	:= ../rpi/rpi.o
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
new file mode 100644
index 0000000..71a0c28
--- /dev/null
+++ b/configs/rpi_3_32b_defconfig
@@ -0,0 +1,11 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCM283X=y
+CONFIG_TARGET_RPI_3_32B=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_PROMPT="U-Boot> "
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_PHYS_TO_BUS=y
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
index 89aee0a..5904a32 100644
--- a/include/configs/rpi-common.h
+++ b/include/configs/rpi-common.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2012,2015 Stephen Warren
+ * (C) Copyright 2012-2016 Stephen Warren
  *
  * SPDX-License-Identifier:	GPL-2.0
  */
@@ -24,6 +24,9 @@
  * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
  * chose to use someone else's previously registered machine ID (3139, MX51_GGC)
  * rather than obtaining a valid ID:-/
+ *
+ * For the bcm2837, hopefully a machine type is not needed, since everything
+ * is DT.
  */
 #ifdef CONFIG_BCM2835
 #define CONFIG_MACH_TYPE		MACH_TYPE_BCM2708
@@ -94,7 +97,11 @@
 #endif
 
 /* Console UART */
+#ifdef CONFIG_BCM2837
+#define CONFIG_BCM283X_MU_SERIAL
+#else
 #define CONFIG_PL01X_SERIAL
+#endif
 #define CONFIG_CONS_INDEX		0
 #define CONFIG_BAUDRATE			115200
 
diff --git a/include/configs/rpi_3_32b.h b/include/configs/rpi_3_32b.h
new file mode 100644
index 0000000..c00379b
--- /dev/null
+++ b/include/configs/rpi_3_32b.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2012-2016 Stephen Warren <swarren@wwwdotorg.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_CACHELINE_SIZE		64
+
+#include "rpi-common.h"
+
+#endif