Merge with git://www.denx.de/git/u-boot.git

Makefile

@@ -1900,7 +1900,7 @@ TQM8560_config:		unconfig
 #########################################################################
 
 MPC8641HPCN_config:    unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn
+	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
 
 sbc8641d_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc86xx sbc8641d

board/freescale/mpc8641hpcn/Makefile

@@ -24,13 +24,14 @@
 include $(TOPDIR)/config.mk
 
 ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../freescale/common)
+$(shell mkdir -p $(obj)../common)
 endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o sys_eeprom.o \
-		../freescale/common/pixis.o
+COBJS	:= $(BOARD).o \
+		../common/sys_eeprom.o \
+		../common/pixis.o
 
 SOBJS	:= init.o
 

board/freescale/mpc8641hpcn/mpc8641hpcn.c

@@ -33,7 +33,7 @@
 extern void ft_cpu_setup(void *blob, bd_t *bd);
 #endif
 
-#include "../freescale/common/pixis.h"
+#include "../common/pixis.h"
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);

board/freescale/mpc8641hpcn/u-boot.lds

@@ -51,7 +51,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc86xx/start.o	(.text)
-    board/mpc8641hpcn/init.o (.bootpg)
+    board/freescale/mpc8641hpcn/init.o (.bootpg)
     cpu/mpc86xx/traps.o (.text)
     cpu/mpc86xx/interrupts.o (.text)
     cpu/mpc86xx/cpu_init.o (.text)

common/cmd_bootm.c

@@ -924,16 +924,17 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
 		initrd_end = 0;
 	}
 
+#if defined(CONFIG_OF_LIBFDT)
+
 #ifdef CFG_BOOTMAPSZ
 	/*
 	 * The blob must be within CFG_BOOTMAPSZ,
-	 * so we flag it to be copied if it is
+	 * so we flag it to be copied if it is not.
 	 */
 	if (of_flat_tree >= (char *)CFG_BOOTMAPSZ)
 		of_data = of_flat_tree;
 #endif
 
-#if defined(CONFIG_OF_LIBFDT)
 	/* move of_flat_tree if needed */
 	if (of_data) {
 		int err;

include/configs/sbc8641d.h

@@ -492,7 +492,7 @@
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
     #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
@@ -513,7 +513,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE		32768
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
 #endif
 
@@ -525,7 +525,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif

net/tftp.c

@@ -614,4 +614,4 @@ static void parse_multicast_oack(char *pkt, int len)
 
 #endif /* Multicast TFTP */
 
-#endif /* CFG_CMD_NET */
+#endif