Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

pm9261: compiles with the AT91 reworked scheme

Browse Source 
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
master
Asen Dimov 13 years ago committed by Albert ARIBAUD
parent 65b0f87a80
commit f47316a8ba
4 changed files with 33 additions and 34 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 9
      board/ronetix/pm9261/led.c
  2. 38
      board/ronetix/pm9261/pm9261.c
  3. 2
      boards.cfg
  4. 18
      include/configs/pm9261.h

9
board/ronetix/pm9261/led.c
Unescape View File

@ -24,17 +24,16 @@
*/
#include <common.h>
#include <asm/arch/at91sam9261.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/io.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
void coloured_LED_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable clock */
writel(1 << AT91SAM9261_ID_PIOC, &pmc->pcer);
writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
at91_set_pio_output(CONFIG_RED_LED, 1);
at91_set_pio_output(CONFIG_GREEN_LED, 1);

38
board/ronetix/pm9261/pm9261.c
Unescape View File

@ -26,17 +26,15 @@
#include <common.h>
#include <asm/sizes.h>
#include <asm/arch/at91sam9261.h>
#include <asm/io.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/gpio.h>
#include <lcd.h>
#include <atmel_lcdc.h>
#include <dataflash.h>
@ -56,9 +54,9 @@ DECLARE_GLOBAL_DATA_PTR;
static void pm9261_nand_hw_init(void)
{
unsigned long csa;
at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable CS3 */
csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A;
@ -86,8 +84,8 @@ static void pm9261_nand_hw_init(void)
AT91_SMC_MODE_TDF_CYCLE(2),
&smc->cs[3].mode);
writel(1 << AT91SAM9261_ID_PIOA |
1 << AT91SAM9261_ID_PIOC,
writel(1 << ATMEL_ID_PIOA |
1 << ATMEL_ID_PIOC,
&pmc->pcer);
/* Configure RDY/BSY */
@ -105,8 +103,8 @@ static void pm9261_nand_hw_init(void)
#ifdef CONFIG_DRIVER_DM9000
static void pm9261_dm9000_hw_init(void)
{
at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Configure SMC CS2 for DM9000 */
writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
@ -127,7 +125,7 @@ static void pm9261_dm9000_hw_init(void)
&smc->cs[2].mode);
/* Configure Interrupt pin as input, no pull-up */
writel(1 << AT91SAM9261_ID_PIOA, &pmc->pcer);
writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
at91_set_pio_input(AT91_PIO_PORTA, 24, 0);
}
#endif
@ -147,7 +145,7 @@ vidinfo_t panel_info = {
vl_vsync_len: 1,
vl_upper_margin:1,
vl_lower_margin:0,
mmio: AT91SAM9261_LCDC_BASE,
mmio: ATMEL_BASE_LCDC,
};
void lcd_enable(void)
@ -162,7 +160,7 @@ void lcd_disable(void)
static void pm9261_lcd_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* LCDHSYNC */
at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* LCDDOTCK */
@ -189,7 +187,7 @@ static void pm9261_lcd_hw_init(void)
writel(1 << 17, &pmc->scer); /* LCD controller Clock, AT91SAM9261 only */
gd->fb_base = AT91SAM9261_SRAM_BASE;
gd->fb_base = ATMEL_BASE_SRAM;
}
#ifdef CONFIG_LCD_INFO
@ -241,13 +239,13 @@ void lcd_show_board_info(void)
int board_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable Ctrlc */
console_init_f();
writel(1 << AT91SAM9261_ID_PIOA |
1 << AT91SAM9261_ID_PIOC,
writel(1 << ATMEL_ID_PIOA |
1 << ATMEL_ID_PIOC,
&pmc->pcer);
/* arch number of PM9261-Board */
@ -256,7 +254,7 @@ int board_init(void)
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
at91_serial_hw_init();
at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
pm9261_nand_hw_init();
#endif

2
boards.cfg
Unescape View File

@ -122,7 +122,7 @@ meesc arm arm926ejs meesc esd
meesc_dataflash arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_DATAFLASH
otc570 arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_NANDFLASH
otc570_dataflash arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_DATAFLASH
pm9261 arm arm926ejs - ronetix at91
pm9261 arm arm926ejs pm9261 ronetix at91 pm9261:AT91SAM9261
pm9263 arm arm926ejs - ronetix at91
da830evm arm arm926ejs da8xxevm davinci davinci
da850evm arm arm926ejs da8xxevm davinci davinci

18
include/configs/pm9261.h
Unescape View File

@ -28,25 +28,29 @@
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* SoC must be defined first, before hardware.h is included.
* In this case SoC is defined in boards.cfg.
*/
#include <asm/hardware.h>
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"
#define CONFIG_DISPLAY_BOARDINFO
#define MASTER_PLL_DIV 15
#define MASTER_PLL_MUL 162
#define MAIN_PLL_DIV 2
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
#define CONFIG_SYS_HZ 1000
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"
#define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_SYS_TEXT_BASE 0
#define CONFIG_AT91FAMILY
/* clocks */
/* CKGR_MOR - enable main osc. */
@ -160,10 +164,8 @@
*/
#define CONFIG_AT91_GPIO 1
#define CONFIG_ATMEL_USART 1
#undef CONFIG_USART0
#undef CONFIG_USART1
#undef CONFIG_USART2
#define CONFIG_USART3 1 /* USART 3 is DBGU */
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
/* LCD */
#define CONFIG_LCD 1

Write Preview
Loading…
Cancel
Save