diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 7dfa520..bbf4228 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -24,10 +24,6 @@ config TARGET_ETHERNUT5 bool "Ethernut5 board" select CPU_ARM926EJS -config TARGET_TNY_A9260 - bool "Caloa TNY A9260 board" - select CPU_ARM926EJS - config TARGET_SNAPPER9260 bool "Support snapper9260" select CPU_ARM926EJS @@ -35,10 +31,6 @@ config TARGET_SNAPPER9260 select DM_SERIAL select DM_GPIO -config TARGET_AFEB9260 - bool "Support afeb9260" - select CPU_ARM926EJS - config TARGET_AT91SAM9261EK bool "Atmel at91sam9261 reference board" select CPU_ARM926EJS @@ -59,10 +51,6 @@ config TARGET_PM9263 bool "Ronetix pm9263 board" select CPU_ARM926EJS -config TARGET_SBC35_A9G20 - bool "Support sbc35_a9g20" - select CPU_ARM926EJS - config TARGET_STAMP9G20 bool "Support stamp9g20" select CPU_ARM926EJS @@ -155,11 +143,8 @@ source "board/atmel/sama5d4_xplained/Kconfig" source "board/atmel/sama5d4ek/Kconfig" source "board/BuS/eb_cpux9k2/Kconfig" source "board/eukrea/cpuat91/Kconfig" -source "board/afeb9260/Kconfig" source "board/bluewater/snapper9260/Kconfig" source "board/BuS/vl_ma2sc/Kconfig" -source "board/calao/sbc35_a9g20/Kconfig" -source "board/calao/tny_a9260/Kconfig" source "board/calao/usb_a9263/Kconfig" source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c index efb53d6..5e0c0f5 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c @@ -166,7 +166,7 @@ void at91_macb_hw_init(void) at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */ at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */ at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */ -#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260) +#if defined(CONFIG_AT91SAM9260EK) /* * use PA10, PA11 for ETX2, ETX3. * PA23 and PA24 are for TWI EEPROM diff --git a/board/afeb9260/Kconfig b/board/afeb9260/Kconfig deleted file mode 100644 index fb64c9c..0000000 --- a/board/afeb9260/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_AFEB9260 - -config SYS_BOARD - default "afeb9260" - -config SYS_CONFIG_NAME - default "afeb9260" - -endif diff --git a/board/afeb9260/MAINTAINERS b/board/afeb9260/MAINTAINERS deleted file mode 100644 index 337f302..0000000 --- a/board/afeb9260/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -AFEB9260 BOARD -M: Sergey Lapin -S: Maintained -F: board/afeb9260/ -F: include/configs/afeb9260.h -F: configs/afeb9260_defconfig diff --git a/board/afeb9260/Makefile b/board/afeb9260/Makefile deleted file mode 100644 index e0c3cd5..0000000 --- a/board/afeb9260/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop -# Lead Tech Design -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += afeb9260.o -obj-y += partition.o diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c deleted file mode 100644 index ea9575d..0000000 --- a/board/afeb9260/afeb9260.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * (C) Copyright 2008 Sergey Lapin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -static void afeb9260_nand_hw_init(void) -{ - unsigned long csa; - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - - /* Assign CS3 to NAND/SmartMedia Interface */ - csa = readl(&matrix->ebicsa); - csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; - writel(csa, &matrix->ebicsa); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); - - /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); - - /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} - -#ifdef CONFIG_MACB -static void afeb9260_macb_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - - - /* Enable EMAC clock */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); - - - /* - * Disable pull-up on: - * RXDV (PA17) => PHY normal mode (not Test mode) - * ERX0 (PA14) => PHY ADDR0 - * ERX1 (PA15) => PHY ADDR1 - * ERX2 (PA25) => PHY ADDR2 - * ERX3 (PA26) => PHY ADDR3 - * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA25) | - pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), - &pioa->pudr); - - at91_phy_reset(); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA25) | - pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), - &pioa->puer); - - at91_macb_hw_init(); -} -#endif -int board_early_init_f(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | - (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC), - &pmc->pcer); - return 0; -} -int board_init(void) -{ - /* arch number of AT91SAM9260EK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_AFEB9260; - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - at91_seriald_hw_init(); -#ifdef CONFIG_CMD_NAND - afeb9260_nand_hw_init(); -#endif - at91_spi0_hw_init((1 << 0) | (1 << 1)); -#ifdef CONFIG_MACB - afeb9260_macb_hw_init(); -#endif - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -} -#endif - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x01); -#endif - return rc; -} diff --git a/board/afeb9260/config.mk b/board/afeb9260/config.mk deleted file mode 100644 index 2077692..0000000 --- a/board/afeb9260/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/afeb9260/partition.c b/board/afeb9260/partition.c deleted file mode 100644 index 6b71477..0000000 --- a/board/afeb9260/partition.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include - -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; - -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1} -}; - -/*define the area offsets*/ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_CLEAR, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"}, -}; diff --git a/board/calao/sbc35_a9g20/Kconfig b/board/calao/sbc35_a9g20/Kconfig deleted file mode 100644 index 37ecfb5..0000000 --- a/board/calao/sbc35_a9g20/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SBC35_A9G20 - -config SYS_BOARD - default "sbc35_a9g20" - -config SYS_VENDOR - default "calao" - -config SYS_CONFIG_NAME - default "sbc35_a9g20" - -endif diff --git a/board/calao/sbc35_a9g20/MAINTAINERS b/board/calao/sbc35_a9g20/MAINTAINERS deleted file mode 100644 index 0ac8225..0000000 --- a/board/calao/sbc35_a9g20/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -SBC35_A9G20 BOARD -#M: Albin Tonnerre -S: Orphan (since 2014-06) -F: board/calao/sbc35_a9g20/ -F: include/configs/sbc35_a9g20.h -F: configs/sbc35_a9g20_eeprom_defconfig -F: configs/sbc35_a9g20_nandflash_defconfig diff --git a/board/calao/sbc35_a9g20/Makefile b/board/calao/sbc35_a9g20/Makefile deleted file mode 100644 index 9ae2d24..0000000 --- a/board/calao/sbc35_a9g20/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop -# Lead Tech Design -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += sbc35_a9g20.o -obj-$(CONFIG_ATMEL_SPI) += spi.o diff --git a/board/calao/sbc35_a9g20/config.mk b/board/calao/sbc35_a9g20/config.mk deleted file mode 100644 index e554a45..0000000 --- a/board/calao/sbc35_a9g20/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x23f00000 diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c deleted file mode 100644 index 2074a93..0000000 --- a/board/calao/sbc35_a9g20/sbc35_a9g20.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * Copyright (C) 2009 - * Albin Tonnerre, Free-Electrons - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include -#endif -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -#ifdef CONFIG_CMD_NAND -static void sbc35_a9g20_nand_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - unsigned long csa; - - /* Enable CS3 */ - csa = readl(&matrix->ebicsa); - csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; - writel(csa, &matrix->ebicsa); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | -#ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_MODE_DBW_16 | -#else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_MODE_DBW_8 | -#endif - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); - - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); - - /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); - - /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif - -#ifdef CONFIG_MACB -static void sbc35_a9g20_macb_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - - /* Enable EMAC clock */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); - - /* - * Disable pull-up on: - * RXDV (PA17) => PHY normal mode (not Test mode) - * ERX0 (PA14) => PHY ADDR0 - * ERX1 (PA15) => PHY ADDR1 - * ERX2 (PA25) => PHY ADDR2 - * ERX3 (PA26) => PHY ADDR3 - * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA25) | - pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), - &pioa->pudr); - - at91_phy_reset(); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA25) | - pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), - &pioa->puer); - - at91_macb_hw_init(); -} -#endif - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - at91_seriald_hw_init(); - sbc35_a9g20_nand_hw_init(); -#ifdef CONFIG_ATMEL_SPI - at91_spi0_hw_init(1 << 4 | 1 << 5); -#endif -#ifdef CONFIG_MACB - sbc35_a9g20_macb_hw_init(); -#endif - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -} -#endif - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00); -#endif - return rc; -} diff --git a/board/calao/sbc35_a9g20/spi.c b/board/calao/sbc35_a9g20/spi.c deleted file mode 100644 index 254c7a3..0000000 --- a/board/calao/sbc35_a9g20/spi.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2009 - * Albin Tonnerre, Free Electrons - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -#define SBC_A9260_CS0_PIN AT91_PIN_PA3 -#define SBC_A9260_CS1_PIN AT91_PIN_PC11 - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && (cs == 1 || cs == 0); -} - -void spi_cs_activate(struct spi_slave *slave) -{ - if(slave->cs == 0) - at91_set_gpio_value(SBC_A9260_CS0_PIN, 0); - else if(slave->cs == 1) - at91_set_gpio_value(SBC_A9260_CS1_PIN, 0); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - if(slave->cs == 0) - at91_set_gpio_value(SBC_A9260_CS0_PIN, 1); - else if(slave->cs == 1) - at91_set_gpio_value(SBC_A9260_CS1_PIN, 1); -} - -void spi_init_f(void) -{ - /* everything done in board_init */ -} diff --git a/board/calao/tny_a9260/Kconfig b/board/calao/tny_a9260/Kconfig deleted file mode 100644 index 2b66329..0000000 --- a/board/calao/tny_a9260/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_TNY_A9260 - -config SYS_BOARD - default "tny_a9260" - -config SYS_VENDOR - default "calao" - -config SYS_CONFIG_NAME - default "tny_a9260" - -endif diff --git a/board/calao/tny_a9260/MAINTAINERS b/board/calao/tny_a9260/MAINTAINERS deleted file mode 100644 index 1f24e39..0000000 --- a/board/calao/tny_a9260/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -TNY_A9260 BOARD -#M: Albin Tonnerre -S: Orphan (since 2014-06) -F: board/calao/tny_a9260/ -F: include/configs/tny_a9260.h -F: configs/tny_a9260_eeprom_defconfig -F: configs/tny_a9260_nandflash_defconfig -F: configs/tny_a9g20_eeprom_defconfig -F: configs/tny_a9g20_nandflash_defconfig diff --git a/board/calao/tny_a9260/Makefile b/board/calao/tny_a9260/Makefile deleted file mode 100644 index 55a6157..0000000 --- a/board/calao/tny_a9260/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop -# Lead Tech Design -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += tny_a9260.o -obj-$(CONFIG_ATMEL_SPI) += spi.o diff --git a/board/calao/tny_a9260/config.mk b/board/calao/tny_a9260/config.mk deleted file mode 100644 index e554a45..0000000 --- a/board/calao/tny_a9260/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x23f00000 diff --git a/board/calao/tny_a9260/spi.c b/board/calao/tny_a9260/spi.c deleted file mode 100644 index 26ba5f5..0000000 --- a/board/calao/tny_a9260/spi.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2009 - * Albin Tonnerre, Free Electrons - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -#define TNY_A9260_CS_PIN AT91_PIN_PC11 - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 1; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - at91_set_gpio_value(TNY_A9260_CS_PIN, 0); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - at91_set_gpio_value(TNY_A9260_CS_PIN, 1); -} - -void spi_init_f(void) -{ - /* everything done in board_init */ -} diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c deleted file mode 100644 index 337be43..0000000 --- a/board/calao/tny_a9260/tny_a9260.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * Copyright (C) 2009 - * Albin Tonnerre, Free Electrons - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -static void tny_a9260_nand_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - unsigned long csa; - - /* Assign CS3 to NAND/SmartMedia Interface */ - csa = readl(&matrix->ebicsa); - csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; - writel(csa, &matrix->ebicsa); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | -#ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_MODE_DBW_16 | -#else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_MODE_DBW_8 | -#endif - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); - - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); - - /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); - - /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - at91_seriald_hw_init(); - tny_a9260_nand_hw_init(); - at91_spi0_hw_init(1 << 5); - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} diff --git a/configs/afeb9260_defconfig b/configs/afeb9260_defconfig deleted file mode 100644 index 694d24d..0000000 --- a/configs/afeb9260_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_AFEB9260=y diff --git a/configs/sbc35_a9g20_eeprom_defconfig b/configs/sbc35_a9g20_eeprom_defconfig deleted file mode 100644 index 6e7589c..0000000 --- a/configs/sbc35_a9g20_eeprom_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_SBC35_A9G20=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_EEPROM" diff --git a/configs/sbc35_a9g20_nandflash_defconfig b/configs/sbc35_a9g20_nandflash_defconfig deleted file mode 100644 index 3092ea3..0000000 --- a/configs/sbc35_a9g20_nandflash_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_SBC35_A9G20=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH" diff --git a/configs/tny_a9260_eeprom_defconfig b/configs/tny_a9260_eeprom_defconfig deleted file mode 100644 index bf5eaff..0000000 --- a/configs/tny_a9260_eeprom_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_TNY_A9260=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_EEPROM" diff --git a/configs/tny_a9260_nandflash_defconfig b/configs/tny_a9260_nandflash_defconfig deleted file mode 100644 index 4fad017..0000000 --- a/configs/tny_a9260_nandflash_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_TNY_A9260=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH" diff --git a/configs/tny_a9g20_eeprom_defconfig b/configs/tny_a9g20_eeprom_defconfig deleted file mode 100644 index 03a0a34..0000000 --- a/configs/tny_a9g20_eeprom_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_TNY_A9260=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_EEPROM" diff --git a/configs/tny_a9g20_nandflash_defconfig b/configs/tny_a9g20_nandflash_defconfig deleted file mode 100644 index 82bedff..0000000 --- a/configs/tny_a9g20_nandflash_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_TNY_A9260=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH" diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 59d2142..aa2b07b 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,14 +12,17 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -korat powerpc ppc4xx - - Larry Johnson -galaxy5200 powerpc mpc5xxx - - Eric Millbrandt -W7OLMC powerpc ppc4xx - - Erik Theisen -W7OLMG powerpc ppc4xx - - Erik Theisen -aev powerpc mpc5xxx - - -TB5200 powerpc mpc5xxx - - -JSE powerpc ppc4xx - - Stephen Williams -BC3450 powerpc mpc5xxx - - +afeb9260 arm arm926ejs - - Sergey Lapin +tny_a9260 arm arm926ejs - - Albin Tonnerre +sbc35_a9g20 arm arm926ejs - - Albin Tonnerre +korat powerpc ppc4xx 5043045d 2015-03-17 Larry Johnson +galaxy5200 powerpc mpc5xxx 41eb4e5c 2015-03-17 Eric Millbrandt +W7OLMC powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen +W7OLMG powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen +aev powerpc mpc5xxx 470ee8b1 2015-03-17 +TB5200 powerpc mpc5xxx 470ee8b1 2015-03-17 +JSE powerpc ppc4xx 2da8137b 2015-03-17 Stephen Williams +BC3450 powerpc mpc5xxx f8296d69 2015-03-17 hawkboard arm arm926ejs cb957cda 2015-02-24 Syed Mohammed Khasim :Sughosh Ganu tnetv107x arm arm1176 50b82c4b 2015-02-24 Chan-Taek Park a320evb arm arm920t 29fc6f24 2015-02-24 Po-Yu Chuang diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h deleted file mode 100644 index 932a309..0000000 --- a/include/configs/afeb9260.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2008 Sergey Lapin - * - * Configuation settings for the AFEB9260 board. - * Based on configuration for AT91SAM9260-EK - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -#define CONFIG_AT91SAM9260 /* Atmel AT91SAM9260 SoC*/ -#include - -#define CONFIG_SYS_TEXT_BASE 0x21f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_AFEB9260 /* AFEB9260 Board */ -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Hardware drivers - */ -#define CONFIG_ATMEL_LEGACY -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_PULLUP 1 - -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_USART3 /* USART 3 is DBGU */ - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ - -/* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 - -#endif - -/* NOR flash - no real flash on this board */ -#define CONFIG_SYS_NO_FLASH - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_NET_RETRY_COUNT 20 - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#define CONFIG_USB_STORAGE - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x21e00000 - -#define CONFIG_SYS_USE_DATAFLASH_CS1 -#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 -\ - GENERATED_GBL_DATA_SIZE) - -/* bootstrap + u-boot + env + linux in dataflash on CS1 */ -#define CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0xa0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock2 " \ - "rw rootfstype=jffs2 panic=20" - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -#endif diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h deleted file mode 100644 index e7c35ec..0000000 --- a/include/configs/sbc35_a9g20.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2009 - * Albin Tonnerre, Free Electrons - * - * Configuation settings for the Calao SBC35-A9G20 board - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* SoC type is defined in boards.cfg */ -#include -#include - -#if defined(CONFIG_SYS_USE_NANDFLASH) -#define CONFIG_ENV_IS_IN_NAND -#else -#define CONFIG_ENV_IS_IN_EEPROM -#endif - -#define MACH_TYPE_SBC35_A9G20 1848 -#define CONFIG_MACH_TYPE MACH_TYPE_SBC35_A9G20 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* GPIO */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO - -/* Serial */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_USB - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) - -/* SPI EEPROM */ -#define CONFIG_SPI -#define CONFIG_CMD_SPI -#define CONFIG_ATMEL_SPI - -#define CONFIG_CMD_EEPROM -#define CONFIG_SPI_M95XXX -#define CONFIG_SYS_EEPROM_SIZE 0x10000 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 - -/* SPI RTC */ -#define CONFIG_CMD_DATE -#define CONFIG_RTC_M41T94 -#define CONFIG_M41T94_SPI_BUS 0 -#define CONFIG_M41T94_SPI_CS 0 - -/* NAND flash */ -#define CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 - -/* NOR flash - no real flash on this board */ -#define CONFIG_SYS_NO_FLASH 1 - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R -#define CONFIG_MACB_SEARCH_PHY -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -/* Env in EEPROM, bootstrap + u-boot in NAND*/ -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_OFFSET 0x20 -#define CONFIG_ENV_SIZE 0x1000 -#endif - -/* Env, bootstrap and u-boot in NAND */ -#ifdef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 -#endif - -#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock1 " \ - "mtdparts=atmel_nand:16M(kernel)ro," \ - "120M(rootfs),-(other) " \ - "rw rootfstype=jffs2" - - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - -#endif diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h deleted file mode 100644 index 79c7fc5..0000000 --- a/include/configs/tny_a9260.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * Copyright (C) 2009 - * Albin Tonnerre, Free Electrons - * - * Configuation settings for the Calao TNY-A9260 and TNY-A9G20 boards - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include - -#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9G20_NANDFLASH) -#define CONFIG_ENV_IS_IN_NAND -#else -#define CONFIG_ENV_IS_IN_EEPROM -#endif - -/* Define actual evaluation board type from used processor type */ -#ifdef CONFIG_AT91SAM9G20 -# define CONFIG_TNY_A9G20 -# define MACH_TYPE_TNY_A9G20 2059 -# define CONFIG_MACH_TYPE MACH_TYPE_TNY_A9G20 -#else -# define CONFIG_TNY_A9260 -# define MACH_TYPE_TNY_A9260 2058 -# define CONFIG_MACH_TYPE MACH_TYPE_TNY_A9260 -#endif - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Hardware drivers - */ -#define CONFIG_ATMEL_LEGACY -#define CONFIG_AT91_GPIO - -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 3 - -/* - * Command line configuration. - */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_USB - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -# define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) - -/* SPI EEPROM */ -#define CONFIG_SPI -#define CONFIG_CMD_SPI -#define CONFIG_ATMEL_SPI - -#define CONFIG_CMD_EEPROM -#define CONFIG_SPI_M95XXX -#define CONFIG_SYS_EEPROM_SIZE 0x10000 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 - -/* NAND flash */ -#define CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 - -/* NOR flash - no real flash on this board */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -/* Env in EEPROM, bootstrap + u-boot in NAND*/ -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_OFFSET 0x20 -#define CONFIG_ENV_SIZE 0x1000 -#endif - -/* Env, bootstrap and u-boot in NAND */ -#ifdef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 -#endif - -#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock1 " \ - "mtdparts=atmel_nand:16M(kernel)ro," \ - "120M(rootfs),-(other) " \ - "rw rootfstype=jffs2" - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - -#endif