Merge branch 'origin' into kconfig-for-1.3.1

master
Grant Likely 17 years ago
commit f92edbd8a0
  1. 227
      CHANGELOG
  2. 1
      MAKEALL
  3. 2
      Makefile
  4. 9
      board/dbau1x00/u-boot.lds
  5. 2
      board/freescale/mpc8544ds/mpc8544ds.c
  6. 2
      board/gth2/gth2.c
  7. 4
      board/gth2/lowlevel_init.S
  8. 8
      board/gth2/u-boot.lds
  9. 9
      board/incaip/u-boot.lds
  10. 2
      board/mpl/vcma9/flash.c
  11. 2
      board/mpl/vcma9/vcma9.h
  12. 2
      board/pb1x00/Makefile
  13. 4
      board/pb1x00/lowlevel_init.S
  14. 2
      board/pb1x00/pb1x00.c
  15. 8
      board/pb1x00/u-boot.lds
  16. 2
      board/pleb2/flash.c
  17. 9
      board/purple/u-boot.lds
  18. 2
      board/sbc2410x/flash.c
  19. 2
      board/smdk2410/flash.c
  20. 9
      board/tb0229/u-boot.lds
  21. 4
      board/tqm5200/tqm5200.c
  22. 5
      board/wepep250/flash.c
  23. 9
      common/cmd_scsi.c
  24. 2
      common/usb_storage.c
  25. 2
      cpu/arm920t/s3c24x0/Makefile
  26. 14
      cpu/arm920t/s3c24x0/usb_ohci.c
  27. 118
      cpu/mips/au1x00_eth.c
  28. 30
      cpu/mips/cache.S
  29. 3
      cpu/mips/config.mk
  30. 6
      cpu/mips/cpu.c
  31. 50
      cpu/mips/start.S
  32. 4
      cpu/mpc86xx/spd_sdram.c
  33. 3
      cpu/mpc86xx/speed.c
  34. 2
      cpu/pxa/i2c.c
  35. 8
      drivers/ati_radeon_fb.c
  36. 2
      drivers/bios_emulator/besys.c
  37. 6
      drivers/bios_emulator/biosemu.c
  38. 2
      drivers/s3c4510b_eth.c
  39. 3
      drivers/tsec.c
  40. 2
      drivers/tsi108_i2c.c
  41. 3
      drivers/tsi108_pci.c
  42. 4
      drivers/usb_ohci.c
  43. 2
      include/asm-arm/arch-at91rm9200/hardware.h
  44. 10
      include/configs/MPC8568MDS.h
  45. 2
      net/bootp.c
  46. 2
      net/bootp.h
  47. 8
      net/net.c
  48. 2
      net/nfs.c
  49. 2
      net/rarp.c
  50. 2
      net/tftp.c

@ -1,3 +1,230 @@
commit f30ad49b16bf998b03c1a5228b6c86369d61c258
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date: Mon Nov 19 10:02:13 2007 -0500
Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
commit f8c320609366176b31104d9bf5e295232e1c7f1d
Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Date: Mon Nov 19 11:14:16 2007 +0900
[MIPS] board/gth2/lowlevel_init.S: Fix a build warning
lowlevel_init.S: Assembler messages:
lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
Looking at codes, the `memtest' and `clearmem' are intentional mixed
use of `global symbols' and `label' for debugging purpose. To make it
build, just disable global-symbols-use for now. As a result `memtest'
still remains as unused, but leave it be...
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Nov 19 12:59:14 2007 +0100
Fix build problems with mp2usb board
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 6bf4c686afca1e86e1c384d59218f914605713bf
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sun Nov 18 18:36:11 2007 +0100
s3c24x0: Fix usb_ohci.c missing in Makefile
and usb_ohci.c warning differ in signedness
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
commit 6073f61e078da5ddb521b56256bcc36508589883
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sun Nov 18 12:55:02 2007 +0100
pb1x00 board: Fix u16 status declaration when PCMCIA is defined
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Nov 18 17:11:09 2007 +0100
Fix compiler warnings for ARM systems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Nov 18 16:36:27 2007 +0100
Fix compiler warnings for PPC systems. Update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Nov 17 11:31:10 2007 +0100
Fix warning differ in signedness in net/net.c and net/nfs.c
commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Nov 17 20:42:45 2007 +0900
gth2.c: Fix a warning on gth2 build.
gth2.c: In function 'misc_init_r':
gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit 2309c130aa4c84b91bd874a41269c923eb61b555
Author: Stefan Roese <sr@denx.de>
Date: Sat Nov 17 07:58:25 2007 +0100
Fix warning differ in signedness in common/cmd_scsi.c
Signed-off-by: Stefan Roese <sr@denx.de>
commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Nov 17 20:05:26 2007 +0900
[MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
Current trick to pick up GNU assembler minor version does not work with the
latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
"(GNU Binutils) ".
$ sde-as --version |grep "GNU assembler"
GNU assembler 2.15.94 mipssde-6.02.02-20050602
$ sde-as --version |grep "GNU assembler" |awk '{print $3}'
2.15.94
$ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
15
$
$ mips-linux-as --version |grep "GNU assembler"
GNU assembler (GNU Binutils) 2.18
$ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
(GNU
$ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
(no output)
$
As a result of above, you'll see many noises with such binutils:
make -C cpu/mips/
/bin/sh: line 0: [: : integer expression expected
/bin/sh: line 0: [: : integer expression expected
make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
/bin/sh: line 0: [: : integer expression expected
mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
/bin/sh: line 0: [: : integer expression expected
mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
/bin/sh: line 0: [: : integer expression expected
This patch simplifies the trick and makes it work with both versions of gas.
I also replace an expensive `awk (or gawk)' with `cut'.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit 16664f72850846e645616da1c0fa5afcd6d15f15
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Nov 17 20:05:26 2007 +0900
[MIPS] Remove useless instructions for initializing $gp.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit 03c031d5660ea946c39af6e2e16267da857c609f
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Oct 27 15:27:06 2007 +0900
[MIPS] MIPS 4K core: Coding style cleanups
No logical changes.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Nov 17 20:05:20 2007 +0900
[MIPS] gth2.c: Fix a warning on gth2 build.
gth2.c: In function 'misc_init_r':
gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit 4fbd0741b2b6441da10be93e10267122581b7079
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Oct 27 15:22:33 2007 +0900
[MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
au1x00_eth.c: In function 'au1x00_miiphy_write':
au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit f01320459736f156707425cf8112f98606301aa4
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Oct 27 15:00:25 2007 +0900
[MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
au1x00_eth.c: In function 'au1x00_enet_initialize':
au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
au1x00_eth.c:246: error: for each function it appears in.)
au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
au1x00_eth.c: In function 'au1x00_miiphy_write':
au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
make[1]: *** [au1x00_eth.o] Error 1
Fixed by moving these two functions forward.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit b09258c5393edd1087c5f39ae68338f16b49f8b3
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Oct 27 15:00:25 2007 +0900
MAKEALL: Added missing pb1000 board
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Oct 27 15:00:24 2007 +0900
[MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Date: Sat Oct 27 15:00:24 2007 +0900
[MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
commit 5947f6999aafa7c54c1390983d264a8463dfea8e
Author: Wolfgang Denk <wd@denx.de>
Date: Sat Nov 17 02:34:38 2007 +0100
Update CHANGELOIG, prepare for -rc4
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
Author: Luotao Fu <l.fu@pengutronix.de>
Date: Wed Nov 14 18:58:33 2007 +0100

@ -554,6 +554,7 @@ LIST_mips5kc_el=""
LIST_au1xx0_el=" \
dbau1550_el \
pb1000 \
"
LIST_mips_el=" \

@ -24,7 +24,7 @@
VERSION = 1
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h

@ -54,10 +54,11 @@ SECTIONS
.sdata : { *(.sdata) }
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
.u_boot_cmd : {
__u_boot_cmd_start = .;
*(.u_boot_cmd)
__u_boot_cmd_end = .;
}
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;

@ -227,7 +227,7 @@ pci_init_board(void)
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
*/
in_be32(CFG_PCIE3_MEM_BASE);
in_be32((u32 *)CFG_PCIE3_MEM_BASE);
} else {
printf (" PCIE3: disabled\n");
}

@ -431,7 +431,7 @@ int misc_init_r(void){
(Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
printf ("*** ethernet addr invalid, using default ***\n");
} else {
setenv ("ethaddr", Rx);
setenv ("ethaddr", (char *)Rx);
}
return (0);
}

@ -413,7 +413,9 @@ noCacheJump:
j clearmem
nop
#if 0
.globl memtest
#endif
memtest:
/* Fill memory with address */
li t0, 0x80000000
@ -434,7 +436,9 @@ mt1: lw t2, 0(t0)
bne t1, zero, mt1
nop
nop
#if 0
.globl clearmem
#endif
clearmem:
/* Clear memory */
li t0, 0x80000000

@ -54,9 +54,11 @@ SECTIONS
.sdata : { *(.sdata) }
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
.u_boot_cmd : {
__u_boot_cmd_start = .;
*(.u_boot_cmd)
__u_boot_cmd_end = .;
}
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;

@ -54,10 +54,11 @@ SECTIONS
.sdata : { *(.sdata) }
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
.u_boot_cmd : {
__u_boot_cmd_start = .;
*(.u_boot_cmd)
__u_boot_cmd_end = .;
}
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;

@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
* Copy memory to flash
*/
volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
static int write_hword (flash_info_t * info, ulong dest, ushort data)
{
vu_short *addr = (vu_short *) dest;
ushort result;

@ -128,7 +128,7 @@ typedef struct {
} /*__attribute__((__packed__))*/ VCMA9_PLD;
#define VCMA9_PLD_BASE 0x2C000100
static inline VCMA9_PLD * const VCMA9_GetBase_PLD(void)
static inline VCMA9_PLD * VCMA9_GetBase_PLD(void)
{
return (VCMA9_PLD * const)VCMA9_PLD_BASE;
}

@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o flash.o
SOBJS = memsetup.o
SOBJS = lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))

@ -15,8 +15,8 @@
.set noreorder
.set mips32
.globl memsetup
memsetup:
.globl lowlevel_init
lowlevel_init:
/*
* Step 1) Establish CPU endian mode.
* NOTE: A fair amount of code is necessary on the Pb1000 to

@ -42,7 +42,9 @@ void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
int checkboard (void)
{
#if defined(CONFIG_IDE_PCMCIA) && 0
u16 status;
#endif
/* volatile u32 *pcmcia_bcsr = (u32*)(DB1000_BCSR_ADDR+0x10); */
volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
u32 proc_id;

@ -54,9 +54,11 @@ SECTIONS
.sdata : { *(.sdata) }
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
.u_boot_cmd : {
__u_boot_cmd_start = .;
*(.u_boot_cmd)
__u_boot_cmd_end = .;
}
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;

@ -196,7 +196,7 @@ void flash_print_info (flash_info_t * info)
int i;
uchar *boottype;
uchar *bootletter;
uchar *fmt;
char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";

@ -64,10 +64,11 @@ SECTIONS
.sdata : { *(.sdata) }
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
.u_boot_cmd : {
__u_boot_cmd_start = .;
*(.u_boot_cmd)
__u_boot_cmd_end = .;
}
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;

@ -288,7 +288,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
* Copy memory to flash
*/
volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
static int write_hword (flash_info_t * info, ulong dest, ushort data)
{
vu_short *addr = (vu_short *) dest;
ushort result;

@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
* Copy memory to flash
*/
volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
static int write_hword (flash_info_t * info, ulong dest, ushort data)
{
vu_short *addr = (vu_short *) dest;
ushort result;

@ -54,10 +54,11 @@ SECTIONS
.sdata : { *(.sdata) }
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
.u_boot_cmd : {
__u_boot_cmd_start = .;
*(.u_boot_cmd)
__u_boot_cmd_end = .;
}
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;

@ -444,6 +444,8 @@ ulong post_word_load (void)
#ifdef CONFIG_BOARD_EARLY_INIT_R
int board_early_init_r (void)
{
extern int usb_cpu_init(void);
#ifdef CONFIG_PS2MULT
ps2mult_early_init();
#endif /* CONFIG_PS2MULT */
@ -591,9 +593,9 @@ int last_stage_init (void)
disable_ctrlc(1);
}
#endif
#endif /* !CONFIG_TQM5200S */
return 0;
#endif /* !CONFIG_TQM5200S */
}
#ifdef CONFIG_VIDEO_SM501

@ -44,6 +44,7 @@
#if ( WEP_FLASH_BUS_WIDTH == 1 )
# define FLASH_BUS vu_char
# define FLASH_BUS_RET u_char
# if ( WEP_FLASH_INTERLEAVE == 1 )
# define FLASH_CMD( x ) x
# else
@ -53,6 +54,7 @@
#elif ( WEP_FLASH_BUS_WIDTH == 2 )
# define FLASH_BUS vu_short
# define FLASH_BUS_RET u_short
# if ( WEP_FLASH_INTERLEAVE == 1 )
# define FLASH_CMD( x ) x
# elif ( WEP_FLASH_INTERLEAVE == 2 )
@ -64,6 +66,7 @@
#elif ( WEP_FLASH_BUS_WIDTH == 4 )
# define FLASH_BUS vu_long
# define FLASH_BUS_RET u_long
# if ( WEP_FLASH_INTERLEAVE == 1 )
# define FLASH_CMD( x ) x
# elif ( WEP_FLASH_INTERLEAVE == 2 )
@ -81,7 +84,7 @@
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
static FLASH_BUS flash_status_reg (void)
static FLASH_BUS_RET flash_status_reg (void)
{
FLASH_BUS *addr = (FLASH_BUS *) 0;

@ -129,9 +129,12 @@ void scsi_scan(int mode)
if((modi&0x80)==0x80) /* drive is removable */
scsi_dev_desc[scsi_max_devs].removable=TRUE;
/* get info for this device */
scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].vendor[0],&tempbuff[8],8);
scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].product[0],&tempbuff[16],16);
scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].revision[0],&tempbuff[32],4);
scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0],
&tempbuff[8], 8);
scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].product[0],
&tempbuff[16], 16);
scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].revision[0],
&tempbuff[32], 4);
scsi_dev_desc[scsi_max_devs].target=pccb->target;
scsi_dev_desc[scsi_max_devs].lun=pccb->lun;

@ -1195,7 +1195,7 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t
dev_desc->product[16] = 0;
dev_desc->revision[4] = 0;
#ifdef CONFIG_USB_BIN_FIXUP
usb_bin_fixup(dev->descriptor, dev_desc->vendor, dev_desc->product);
usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor, (uchar *)dev_desc->product);
#endif /* CONFIG_USB_BIN_FIXUP */
USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]);
if(usb_test_unit_ready(pccb,ss)) {

@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
COBJS = i2c.o interrupts.o serial.o speed.o \
usb.o
usb.o usb_ohci.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))

@ -498,7 +498,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
if (ohci->ed_controltail == NULL) {
writel (ed, &ohci->regs->ed_controlhead);
} else {
ohci->ed_controltail->hwNextED = m32_swap (ed);
ohci->ed_controltail->hwNextED = (__u32)m32_swap (ed);
}
ed->ed_prev = ohci->ed_controltail;
if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
@ -514,7 +514,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
if (ohci->ed_bulktail == NULL) {
writel (ed, &ohci->regs->ed_bulkhead);
} else {
ohci->ed_bulktail->hwNextED = m32_swap (ed);
ohci->ed_bulktail->hwNextED = (__u32)m32_swap (ed);
}
ed->ed_prev = ohci->ed_bulktail;
if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
@ -606,7 +606,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
/* dummy td; end of td list for ed */
td = td_alloc (usb_dev);
ed->hwTailP = m32_swap (td);
ed->hwTailP = (__u32)m32_swap (td);
ed->hwHeadP = ed->hwTailP;
ed->state = ED_UNLINK;
ed->type = usb_pipetype (pipe);
@ -663,13 +663,13 @@ static void td_fill (ohci_t *ohci, unsigned int info,
if (!len)
data = 0;
td->hwINFO = m32_swap (info);
td->hwCBP = m32_swap (data);
td->hwINFO = (__u32)m32_swap (info);
td->hwCBP = (__u32)m32_swap (data);
if (data)
td->hwBE = m32_swap (data + len - 1);
td->hwBE = (__u32)m32_swap (data + len - 1);
else
td->hwBE = 0;
td->hwNextTD = m32_swap (td_pt);
td->hwNextTD = (__u32)m32_swap (td_pt);
/* append to queue */
td->ed->hwTailP = td->hwNextTD;

@ -90,6 +90,65 @@ mac_fifo_t mac_fifo[NO_OF_FIFOS];
#define MAX_WAIT 1000
#if defined(CONFIG_CMD_MII)
int au1x00_miiphy_read(char *devname, unsigned char addr,
unsigned char reg, unsigned short * value)
{
volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
u32 mii_control;
unsigned int timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_read busy timeout!!\n");
return -1;
}
}
mii_control = MAC_SET_MII_SELECT_REG(reg) |
MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
*mii_control_reg = mii_control;
timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_read busy timeout!!\n");
return -1;
}
}
*value = *mii_data_reg;
return 0;
}
int au1x00_miiphy_write(char *devname, unsigned char addr,
unsigned char reg, unsigned short value)
{
volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
u32 mii_control;
unsigned int timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_write busy timeout!!\n");
return -1;
}
}
mii_control = MAC_SET_MII_SELECT_REG(reg) |
MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
*mii_data_reg = value;
*mii_control_reg = mii_control;
return 0;
}
#endif
static int au1x00_send(struct eth_device* dev, volatile void *packet, int length){
volatile mac_fifo_t *fifo_tx =
(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
@ -249,63 +308,4 @@ int au1x00_enet_initialize(bd_t *bis){
return 1;
}
#if defined(CONFIG_CMD_MII)
int au1x00_miiphy_read(char *devname, unsigned char addr,
unsigned char reg, unsigned short * value)
{
volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
u32 mii_control;
unsigned int timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_read busy timeout!!\n");
return -1;
}
}
mii_control = MAC_SET_MII_SELECT_REG(reg) |
MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
*mii_control_reg = mii_control;
timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_read busy timeout!!\n");
return -1;
}
}
*value = *mii_data_reg;
return 0;
}
int au1x00_miiphy_write(char *devname, unsigned char addr,
unsigned char reg, unsigned short value)
{
volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
u32 mii_control;
unsigned int timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_write busy timeout!!\n");
return;
}
}
mii_control = MAC_SET_MII_SELECT_REG(reg) |
MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
*mii_data_reg = value;
*mii_control_reg = mii_control;
return 0;
}
#endif
#endif /* CONFIG_AU1X00 */

@ -22,7 +22,6 @@
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/regdef.h>
@ -30,13 +29,11 @@
#include <asm/addrspace.h>
#include <asm/cacheops.h>
/* 16KB is the maximum size of instruction and data caches on
* MIPS 4K.
*/
#define MIPS_MAX_CACHE_SIZE 0x4000
/*
* cacheop macro to automate cache operations
* first some helpers...
@ -131,7 +128,6 @@ mips_cache_reset:
li t4, CFG_CACHELINE_SIZE
move t5, t4
li v0, MIPS_MAX_CACHE_SIZE
/* Now clear that much memory starting from zero.
@ -139,8 +135,8 @@ mips_cache_reset:
li a0, KSEG1
addu a1, a0, v0
2: sw zero, 0(a0)
2:
sw zero, 0(a0)
sw zero, 4(a0)
sw zero, 8(a0)
sw zero, 12(a0)
@ -156,11 +152,11 @@ mips_cache_reset:
mtc0 zero, CP0_TAGLO
/*
* The caches are probably in an indeterminate state,
* so we force good parity into them by doing an
* invalidate, load/fill, invalidate for each line.
*/
/*
* The caches are probably in an indeterminate state,
* so we force good parity into them by doing an
* invalidate, load/fill, invalidate for each line.
*/
/* Assume bottom of RAM will generate good parity for the cache.
*/
@ -201,9 +197,9 @@ mips_cache_reset:
move a1, a2
icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
j ra
.end mips_cache_reset
j ra
.end mips_cache_reset
/*******************************************************************************
*
@ -220,7 +216,7 @@ dcache_status:
andi v0, v0, 1
j ra
.end dcache_status
.end dcache_status
/*******************************************************************************
*
@ -237,11 +233,10 @@ dcache_disable:
li t1, -8
and t0, t0, t1
ori t0, t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
mtc0 t0, CP0_CONFIG
j ra
.end dcache_disable
.end dcache_disable
/*******************************************************************************
*
@ -266,4 +261,5 @@ mips_cache_lock:
icacheop(a0,a1,a2,a3,0x1d)
j ra
.end mips_cache_lock

@ -20,8 +20,7 @@
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
v=$(shell \
$(CROSS_COMPILE)as --version|grep "GNU assembler"|awk '{print $$3}'|awk -F . '{print $$2}')
v=$(shell $(AS) --version |grep "GNU assembler" |cut -d. -f2)
MIPSFLAGS=$(shell \
if [ "$v" -lt "14" ]; then \
echo "-mcpu=4kc"; \

@ -39,12 +39,12 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
void flush_cache (ulong start_addr, ulong size)
void flush_cache(ulong start_addr, ulong size)
{
}
void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 ){
void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
{
write_32bit_cp0_register(CP0_ENTRYLO0, low0);
write_32bit_cp0_register(CP0_PAGEMASK, pagemask);
write_32bit_cp0_register(CP0_ENTRYLO1, low1);

@ -22,13 +22,11 @@
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#define RVECENT(f,n) \
b f; nop
#define XVECENT(f,bev) \
@ -192,7 +190,7 @@ _start:
.word 0x00000000
.word 0x03e00008
.word 0x00000000
.word 0x00000000
.word 0x00000000
/* 0xbfc00428 */
.word 0xdc870000
.word 0xfca70000
@ -203,7 +201,7 @@ _start:
.word 0x00000000
.word 0x03e00008
.word 0x00000000
.word 0x00000000
.word 0x00000000
#endif /* CONFIG_PURPLE */
.align 4
reset:
@ -235,33 +233,31 @@ reset:
mtc0 t0, CP0_CONFIG
/* Initialize $gp.
*/
bal 1f
*/
bal 1f
nop
.word _gp
1:
move gp, ra
lw t1, 0(ra)
move gp, t1
1:
lw gp, 0(ra)
#ifdef CONFIG_INCA_IP
/* Disable INCA-IP Watchdog.
*/
la t9, disable_incaip_wdt
jalr t9
la t9, disable_incaip_wdt
jalr t9
nop
#endif
/* Initialize any external memory.
*/
la t9, lowlevel_init
jalr t9
la t9, lowlevel_init
jalr t9
nop
/* Initialize caches...
*/
la t9, mips_cache_reset
jalr t9
la t9, mips_cache_reset
jalr t9
nop
/* ... and enable them.
@ -269,12 +265,11 @@ reset:
li t0, CONF_CM_CACHABLE_NONCOHERENT
mtc0 t0, CP0_CONFIG
/* Set up temporary stack.
*/
li a0, CFG_INIT_SP_OFFSET
la t9, mips_cache_lock
jalr t9
la t9, mips_cache_lock
jalr t9
nop
li t0, CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET
@ -284,7 +279,6 @@ reset:
j t9
nop
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
@ -298,7 +292,7 @@ reset:
.globl relocate_code
.ent relocate_code
relocate_code:
move sp, a0 /* Set new stack pointer */
move sp, a0 /* Set new stack pointer */
li t0, CFG_MONITOR_BASE
la t3, in_ram
@ -312,8 +306,8 @@ relocate_code:
*/
move t6, gp
sub gp, CFG_MONITOR_BASE
add gp, a2 /* gp now adjusted */
sub t6, gp, t6 /* t6 <-- relocation offset */
add gp, a2 /* gp now adjusted */
sub t6, gp, t6 /* t6 <-- relocation offset */
/*
* t0 = source address
@ -329,7 +323,7 @@ relocate_code:
sw t3, 0(t1)
addu t0, 4
ble t0, t2, 1b
addu t1, 4 /* delay slot */
addu t1, 4 /* delay slot */
#endif
/* If caches were enabled, we would have to flush them here.
@ -376,7 +370,8 @@ in_ram:
add t2, t6
sub t1, 4
1: addi t1, 4
1:
addi t1, 4
bltl t1, t2, 1b
sw zero, 0(t1) /* delay slot */
@ -387,11 +382,10 @@ in_ram:
.end relocate_code
/* Exception handlers.
*/
romReserved:
b romReserved
b romReserved
romExcHandle:
b romExcHandle
b romExcHandle

@ -1114,8 +1114,10 @@ spd_sdram(void)
int memsize_ddr1 = 0;
unsigned int law_size_ddr1;
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
#ifdef CONFIG_DDR_INTERLEAVE
volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
#endif
#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
int memsize_ddr2_dimm1 = 0;

@ -31,6 +31,9 @@
DECLARE_GLOBAL_DATA_PTR;
/* used in some defintiions of CONFIG_SYS_CLK_FREQ */
extern unsigned long get_board_sys_clk(unsigned long dummy);
void get_sys_info(sys_info_t *sysInfo)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;

@ -457,7 +457,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
uchar i2c_reg_read (uchar chip, uchar reg)
{
char buf;
uchar buf;
PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
i2c_read(chip, reg, 1, &buf, 1);

@ -300,7 +300,7 @@ typedef struct {
u32 val;
} reg_val;
#if 0 /* unused ? -> scheduled for removal */
/* these common regs are cleared before mode setting so they do not
* interfere with anything
*/
@ -316,11 +316,10 @@ static reg_val common_regs[] = {
{ CAP0_TRIG_CNTL, 0 },
{ CAP1_TRIG_CNTL, 0 },
};
#endif /* 0 */
void radeon_setmode(void)
{
int i;
struct radeon_regs *mode = malloc(sizeof(struct radeon_regs));
mode->crtc_gen_cntl = 0x03000200;
@ -351,6 +350,9 @@ void radeon_setmode(void)
radeon_write_pll_regs(rinfo, mode);
}
#include "bios_emulator/include/biosemu.h"
extern int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp);
int radeon_probe(struct radeonfb_info *rinfo)
{
pci_dev_t pdev;

@ -96,7 +96,7 @@ static u8 *BE_memaddr(u32 addr)
else if (addr >= 0xFFFF5 && addr < 0xFFFFE) {
/* Return a faked BIOS date string for non-x86 machines */
DB(printf("BE_memaddr - Returning BIOS date\n");)
return BE_biosDate + addr - 0xFFFF5;
return (u8 *)(BE_biosDate + addr - 0xFFFF5);
} else if (addr == 0xFFFFE) {
/* Return system model identifier for non-x86 machines */
DB(printf("BE_memaddr - Returning model\n");)

@ -96,7 +96,7 @@ int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info, int shared)
return 0;
}
M.mem_base = (unsigned long)malloc(memSize);
M.mem_base = malloc(memSize);
if (M.mem_base == NULL){
printf("Biosemu:Out of memory!");
@ -106,7 +106,7 @@ int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info, int shared)
_BE_env.emulateVGA = 0;
_BE_env.busmem_base = (unsigned long)malloc(128 * 1024);
if (_BE_env.busmem_base == NULL){
if ((void *)_BE_env.busmem_base == NULL){
printf("Biosemu:Out of memory!");
return 0;
}
@ -230,7 +230,7 @@ Cleans up and exits the emulator.
void X86API BE_exit(void)
{
free(M.mem_base);
free(_BE_env.busmem_base);
free((void *)_BE_env.busmem_base);
}
/****************************************************************************

@ -175,7 +175,7 @@ s32 eth_send(volatile void *packet, s32 length)
}
/* copy user data into frame data pointer */
memcpy((void *)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr),
memcpy((void *)((u32)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr)),
(void *)packet,
length);

@ -117,10 +117,13 @@ struct phy_info *get_phy_info(struct eth_device *dev);
void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
static void adjust_link(struct eth_device *dev);
static void relocate_cmds(void);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
&& !defined(BITBANGMII)
static int tsec_miiphy_write(char *devname, unsigned char addr,
unsigned char reg, unsigned short value);
static int tsec_miiphy_read(char *devname, unsigned char addr,
unsigned char reg, unsigned short *value);
#endif
#ifdef CONFIG_MCAST_TFTP
static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set);
#endif

@ -276,7 +276,7 @@ int i2c_probe (uchar chip)
* The Tsi108 HW doesn't support sending just the chip address
* and checkong for an <ACK> back.
*/
return i2c_read (chip, 0, 1, (char *)&tmp, 1);
return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
}
#endif

@ -33,6 +33,9 @@
#include <pci.h>
#include <asm/io.h>
#include <tsi108.h>
#ifdef CONFIG_OF_FLAT_TREE
#include <ft_build.h>
#endif
struct pci_controller local_hose;

@ -59,6 +59,10 @@
#include <usb.h>
#include "usb_ohci.h"
#ifdef CONFIG_AT91RM9200
#include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
#endif
#if defined(CONFIG_ARM920T) || \
defined(CONFIG_S3C2400) || \
defined(CONFIG_S3C2410) || \

@ -24,8 +24,6 @@
#ifndef __ASSEMBLY__
#include "AT91RM9200.h"
#else
#include "AT91RM9200_inc.h"
#endif
/* Virtual and Physical base address for system peripherals */

@ -334,11 +334,6 @@ extern unsigned long get_clock_freq(void);
#define CFG_SRIO_MEM_BASE 0xc0000000
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#ifdef CONFIG_QE
/*
* QE UEC ethernet configuration
@ -377,6 +372,11 @@ extern unsigned long get_clock_freq(void);
#endif
#endif /* CONFIG_QE */
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP

@ -33,7 +33,7 @@
#if defined(CONFIG_CMD_NET)
#define TIMEOUT 5 /* Seconds before trying BOOTP again */
#define TIMEOUT 5UL /* Seconds before trying BOOTP again */
#ifndef CONFIG_NET_RETRY_COUNT
# define TIMEOUT_COUNT 5 /* # of timeouts before giving up */
#else

@ -88,7 +88,7 @@ typedef enum { INIT,
#define DHCP_NAK 6
#define DHCP_RELEASE 7
#define SELECT_TIMEOUT 3 /* Seconds to wait for offers */
#define SELECT_TIMEOUT 3UL /* Seconds to wait for offers */
/**********************************************************************/

@ -94,7 +94,7 @@
DECLARE_GLOBAL_DATA_PTR;
#define ARP_TIMEOUT 5 /* Seconds before trying ARP again */
#define ARP_TIMEOUT 5UL /* Seconds before trying ARP again */
#ifndef CONFIG_NET_RETRY_COUNT
# define ARP_TIMEOUT_COUNT 5 /* # of timeouts before giving up */
#else
@ -589,7 +589,7 @@ void NetStartAgain (void)
return;
}
#ifndef CONFIG_NET_MULTI
NetSetTimeout (10 * CFG_HZ, startAgainTimeout);
NetSetTimeout (10UL * CFG_HZ, startAgainTimeout);
NetSetHandler (startAgainHandler);
#else /* !CONFIG_NET_MULTI*/
eth_halt ();
@ -598,7 +598,7 @@ void NetStartAgain (void)
if (NetRestartWrap) {
NetRestartWrap = 0;
if (NetDevExists && !once) {
NetSetTimeout (10 * CFG_HZ, startAgainTimeout);
NetSetTimeout (10UL * CFG_HZ, startAgainTimeout);
NetSetHandler (startAgainHandler);
} else {
NetState = NETLOOP_FAIL;
@ -774,7 +774,7 @@ static void PingStart(void)
#if defined(CONFIG_NET_MULTI)
printf ("Using %s device\n", eth_get_name());
#endif /* CONFIG_NET_MULTI */
NetSetTimeout (10 * CFG_HZ, PingTimeout);
NetSetTimeout (10UL * CFG_HZ, PingTimeout);
NetSetHandler (PingHandler);
PingSend();

@ -34,7 +34,7 @@
#if defined(CONFIG_CMD_NET) && defined(CONFIG_CMD_NFS)
#define HASHES_PER_LINE 65 /* Number of "loading" hashes per line */
#define NFS_TIMEOUT 60
#define NFS_TIMEOUT 60UL
static int fs_mounted = 0;
static unsigned long rpc_id = 0;

@ -31,7 +31,7 @@
#if defined(CONFIG_CMD_NET)
#define TIMEOUT 5 /* Seconds before trying BOOTP again */
#define TIMEOUT 5UL /* Seconds before trying BOOTP again */
#ifndef CONFIG_NET_RETRY_COUNT
# define TIMEOUT_COUNT 5 /* # of timeouts before giving up */
#else

@ -15,7 +15,7 @@
#if defined(CONFIG_CMD_NET)
#define WELL_KNOWN_PORT 69 /* Well known TFTP port # */
#define TIMEOUT 5 /* Seconds to timeout for a lost pkt */
#define TIMEOUT 5UL /* Seconds to timeout for a lost pkt */
#ifndef CONFIG_NET_RETRY_COUNT
# define TIMEOUT_COUNT 10 /* # of timeouts before giving up */
#else

Loading…
Cancel
Save