From fbada4855d97532514a2be55e355f4bb49f81766 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 28 Mar 2018 20:54:14 +0800 Subject: [PATCH] net: fec: sharing MDIO for two enet controllers On i.MX6SX, 6UL and 7D, there are two enet controllers each has a MDIO port. But Some boards share one MDIO port for the two enets. So introduce a configuration CONFIG_FEC_MXC_MDIO_BASE to indicate the MDIO port for sharing. In Kconfig, user needs enable CONFIG_FEC_MXC_SHARE_MDIO first to enter the CONFIG_FEC_MXC_MDIO_BASE. To i.MX28, adapt to use the new config Signed-off-by: Peng Fan Acked-by: Joe Hershberger Cc: Fabio Estevam --- drivers/net/Kconfig | 13 ++++++++++++- drivers/net/fec_mxc.c | 8 ++++++-- include/configs/mx28evk.h | 1 + 3 files changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 98573cb..3a374d8 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -155,9 +155,20 @@ config ETHOC help This MAC is present in OpenRISC and Xtensa XTFPGA boards. +config FEC_MXC_SHARE_MDIO + bool "Share the MDIO bus for FEC controller" + depends on FEC_MXC + +config FEC_MXC_MDIO_BASE + hex "MDIO base address for the FEC controller" + depends on FEC_MXC_SHARE_MDIO + help + This specifies the MDIO registers base address. It is used when + two FEC controllers share MDIO bus. + config FEC_MXC bool "FEC Ethernet controller" - depends on MX5 || MX6 + depends on MX5 || MX6 || MX7 help This driver supports the 10/100 Fast Ethernet controller for NXP i.MX processors. diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 1f752d7..1de72da 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -1146,12 +1146,12 @@ int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr) #endif int ret; -#ifdef CONFIG_MX28 +#ifdef CONFIG_FEC_MXC_MDIO_BASE /* * The i.MX28 has two ethernet interfaces, but they are not equal. * Only the first one can access the MDIO bus. */ - base_mii = MXS_ENET0_BASE; + base_mii = CONFIG_FEC_MXC_MDIO_BASE; #else base_mii = addr; #endif @@ -1273,7 +1273,11 @@ static int fecmxc_probe(struct udevice *dev) fec_reg_setup(priv); priv->dev_id = dev->seq; +#ifdef CONFIG_FEC_MXC_MDIO_BASE + bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE, dev->seq); +#else bus = fec_get_miibus((ulong)priv->eth, dev->seq); +#endif if (!bus) { ret = -ENOMEM; goto err_mii; diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index bc58ca5..79d4c9b 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -65,6 +65,7 @@ /* FEC Ethernet on SoC */ #ifdef CONFIG_CMD_NET #define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_MDIO_BASE MXS_ENET0_BASE #define CONFIG_MX28_FEC_MAC_IN_OCOTP #endif