Your ROOT_URL in app.ini is https://src.whiteboxsystems.nl/ but you are visiting http://src.whiteboxsystems.nl/Whitebox/u-boot/commit/fbf10ae98657f1a888b670078f4eb18f9172c834 You should set ROOT_URL correctly, otherwise the web may not work correctly.

sunxi: gpio: Add support for the gpio banks which are part of the R-io cluster

sun6i and later have a couple of io-blocks which are shared between the
main CPU core and the "R" cpu which is small embedded cpu which can be
active while the main system is suspended.

These gpio banks sit at a different mmio address then the normal banks,
and have a separate devicetree node and compatible, this adds support for
these banks to the sunxi-gpio code when built with device-model support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
master
Hans de Goede 10 years ago
parent f00e8207c3
commit fbf10ae986
  1. 22
      drivers/gpio/sunxi_gpio.c

@ -266,16 +266,28 @@ static int gpio_sunxi_bind(struct udevice *parent)
{
struct sunxi_gpio_platdata *plat = parent->platdata;
struct sunxi_gpio_reg *ctlr;
int bank;
int ret;
int bank, no_banks, ret, start;
/* If this is a child device, there is nothing to do here */
if (plat)
return 0;
if (fdt_node_check_compatible(gd->fdt_blob, parent->of_offset,
"allwinner,sun6i-a31-r-pinctrl") == 0) {
start = 'L' - 'A';
no_banks = 2; /* L & M */
} else if (fdt_node_check_compatible(gd->fdt_blob, parent->of_offset,
"allwinner,sun8i-a23-r-pinctrl") == 0) {
start = 'L' - 'A';
no_banks = 1; /* L only */
} else {
start = 0;
no_banks = SUNXI_GPIO_BANKS;
}
ctlr = (struct sunxi_gpio_reg *)fdtdec_get_addr(gd->fdt_blob,
parent->of_offset, "reg");
for (bank = 0; bank < SUNXI_GPIO_BANKS; bank++) {
for (bank = 0; bank < no_banks; bank++) {
struct sunxi_gpio_platdata *plat;
struct udevice *dev;
@ -283,7 +295,7 @@ static int gpio_sunxi_bind(struct udevice *parent)
if (!plat)
return -ENOMEM;
plat->regs = &ctlr->gpio_bank[bank];
plat->bank_name = gpio_bank_name(bank);
plat->bank_name = gpio_bank_name(start + bank);
plat->gpio_count = SUNXI_GPIOS_PER_BANK;
ret = device_bind(parent, parent->driver,
@ -306,6 +318,8 @@ static const struct udevice_id sunxi_gpio_ids[] = {
{ .compatible = "allwinner,sun8i-a23-pinctrl" },
{ .compatible = "allwinner,sun8i-a33-pinctrl" },
{ .compatible = "allwinner,sun9i-a80-pinctrl" },
{ .compatible = "allwinner,sun6i-a31-r-pinctrl" },
{ .compatible = "allwinner,sun8i-a23-r-pinctrl" },
{ }
};

Loading…
Cancel
Save