am33xx: Pass to config_ddr the type of memory that is connected

We need to pass in the type of memory that is connected to the board.
The only reliable way to do this is to know what type of board we are
running on (which later will be knowable in s_init()).  For now, pass in
the value of DDR2.

Signed-off-by: Tom Rini <trini@ti.com>

arch/arm/cpu/armv7/am33xx/board.c

@@ -27,6 +27,7 @@
 #include <asm/arch/common_def.h>
 #include <asm/io.h>
 #include <asm/omap_common.h>
+#include <asm/emif.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -107,7 +108,7 @@ void s_init(void)
 
 	preloader_console_init();
 
-	config_ddr();
+	config_ddr(EMIF_REG_SDRAM_TYPE_DDR2);
 #endif
 
 	/* Enable MMC0 */

arch/arm/cpu/armv7/am33xx/emif4.c

@@ -22,6 +22,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/arch/clock.h>
 #include <asm/io.h>
+#include <asm/emif.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -29,7 +30,6 @@ struct ddr_regs *ddrregs = (struct ddr_regs *)DDR_PHY_BASE_ADDR;
 struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR;
 struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
 
-
 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
@@ -143,33 +143,37 @@ static void config_emif_ddr2(void)
 		printf("Couldn't configure SDRAM\n");
 }
 
-void config_ddr(void)
+void config_ddr(short ddr_type)
 {
 	struct ddr_ioctrl ioctrl;
 
 	enable_emif_clocks();
 
-	config_vtp();
+	if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) {
+		config_vtp();
 
-	config_cmd_ctrl(&ddr2_cmd_ctrl_data);
+		config_cmd_ctrl(&ddr2_cmd_ctrl_data);
 
-	config_ddr_data(0, &ddr2_data);
-	config_ddr_data(1, &ddr2_data);
+		config_ddr_data(0, &ddr2_data);
+		config_ddr_data(1, &ddr2_data);
 
-	writel(PHY_RANK0_DELAY, &ddrregs->dt0rdelays0);
-	writel(PHY_RANK0_DELAY, &ddrregs->dt1rdelays0);
+		writel(PHY_RANK0_DELAY, &ddrregs->dt0rdelays0);
+		writel(PHY_RANK0_DELAY, &ddrregs->dt1rdelays0);
 
-	ioctrl.cmd1ctl = DDR_IOCTRL_VALUE;
-	ioctrl.cmd2ctl = DDR_IOCTRL_VALUE;
-	ioctrl.cmd3ctl = DDR_IOCTRL_VALUE;
-	ioctrl.data1ctl = DDR_IOCTRL_VALUE;
-	ioctrl.data2ctl = DDR_IOCTRL_VALUE;
+		ioctrl.cmd1ctl = DDR_IOCTRL_VALUE;
+		ioctrl.cmd2ctl = DDR_IOCTRL_VALUE;
+		ioctrl.cmd3ctl = DDR_IOCTRL_VALUE;
+		ioctrl.data1ctl = DDR_IOCTRL_VALUE;
+		ioctrl.data2ctl = DDR_IOCTRL_VALUE;
 
-	config_io_ctrl(&ioctrl);
+		config_io_ctrl(&ioctrl);
 
-	writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff, &ddrctrl->ddrioctrl);
-	writel(readl(&ddrctrl->ddrckectrl) | 0x00000001, &ddrctrl->ddrckectrl);
+		writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff,
+				&ddrctrl->ddrioctrl);
+		writel(readl(&ddrctrl->ddrckectrl) | 0x00000001,
+				&ddrctrl->ddrckectrl);
 
-	config_emif_ddr2();
+		config_emif_ddr2();
+	}
 }
 #endif

arch/arm/include/asm/arch-am33xx/ddr_defs.h

@@ -232,6 +232,6 @@ struct ddr_ctrl {
 	unsigned int ddrckectrl;
 };
 
-void config_ddr(void);
+void config_ddr(short ddr_type);
 
 #endif  /* _DDR_DEFS_H */

arch/arm/include/asm/emif.h

@@ -19,7 +19,7 @@
 #define EMIF1_BASE				0x4c000000
 #define EMIF2_BASE				0x4d000000
 
-/* Registers shifts and masks */
+/* Registers shifts, masks and values */
 
 /* EMIF_MOD_ID_REV */
 #define EMIF_REG_SCHEME_SHIFT			30
@@ -46,6 +46,12 @@
 /* SDRAM_CONFIG */
 #define EMIF_REG_SDRAM_TYPE_SHIFT			29
 #define EMIF_REG_SDRAM_TYPE_MASK			(0x7 << 29)
+#define EMIF_REG_SDRAM_TYPE_DDR1			0
+#define EMIF_REG_SDRAM_TYPE_LPDDR1			1
+#define EMIF_REG_SDRAM_TYPE_DDR2			2
+#define EMIF_REG_SDRAM_TYPE_DDR3			3
+#define EMIF_REG_SDRAM_TYPE_LPDDR2_S4			4
+#define EMIF_REG_SDRAM_TYPE_LPDDR2_S2			5
 #define EMIF_REG_IBANK_POS_SHIFT			27
 #define EMIF_REG_IBANK_POS_MASK			(0x3 << 27)
 #define EMIF_REG_DDR_TERM_SHIFT			24