When we get a problem like overlapping regions it is sometimes hard to
figure what what is going on. At present we don't write the map file in
this case. However the file does provide useful information.
Catch any packing errors and write a map file (if enabled with -m) to aid
debugging.
Signed-off-by: Simon Glass <sjg@chromium.org>
In some cases it is useful to add a group of files to the image and be
able to access them at run-time. Of course it is possible to generate
the binman config file with a set of blobs each with a filename. But for
convenience, add an entry type which can do this.
Add required support (for adding nodes and string properties) into the
state module.
Signed-off-by: Simon Glass <sjg@chromium.org>
Binman currently supports updating the main device tree with things like
the position of each entry. Extend this support to SPL and TPL as well,
since they may need (a subset of) this information.
Also adjust DTB output files to have a .out extension since this seems
clearer than having a .dtb extension with 'out' in the name somwhere.
Also add a few missing comments and update the DT setup code to use
ReadFile and WriteFile().
Signed-off-by: Simon Glass <sjg@chromium.org>
We use a fake device tree in tests most of the time since tests don't
normally care about the actual data. For example, for U-Boot proper we use
U_BOOT_DTB_DATA which is just a four-character string. This makes testing
the image output against an expected value very easy.
However in some cases, such as when the test wants to check that the DT
output containing particular nodes, we do actually need the real DT. Add
support for this, along with a command-line option to select 'test mode'.
Signed-off-by: Simon Glass <sjg@chromium.org>
We always have a device tree for U-Boot proper. But we may also have one
for SPL and TPL. Add a new Entry method to find out what DTs an entry
has, and use that list when updating DTs.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the control module has state information in it, since it is the
primary user of this. But it is a bit odd to have entries and other
modules importing control to obtain this information.
It seems better to have a dedicated state module, which control can use as
well. Create a new module using code from control and update other modules
to use it.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we require the caller to manually update the device tree using
individual calls to libfdt functions. This is not ideal. It would be
better if we could make changes using the Python structure and then call a
Sync() function to write them back.
Add this feature to the Fdt class. Update binman and the tests to match.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sometimes it is useful to build only a subset of the images provided by
the binman configuration. Add a -i option for this. It can be given
multiple times to build several images. If the option is not given, all
images are built.
Signed-off-by: Simon Glass <sjg@chromium.org>
Binman supports quite a number of different entries now. The operation of
these is not always obvious but at present the source code is the only
reference for understanding how an entry works.
Add a way to create documentation (from the source code) which can be put
in a new 'README.entries' file.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present binman needs libfdt.py to be available before it will do
anything, even print help. Import those modules later to avoid this, as it
is bad practice to fail to even show help on startup.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sometimes it is useful to pass binman the value of an entry property from
the command line. For example some entries need access to files and it is
not always convenient to put these filenames in the image definition
(device tree).
Add a -a option which can be used like this:
-a<prop>=<value>
where
<prop> is the property to set
<value> is the value to set it to
Signed-off-by: Simon Glass <sjg@chromium.org>
At present each entry has an offset within its parent section. This is
useful for figuring out how entries relate to one another. However it
is sometimes necessary to locate an entry within an image, regardless
of which sections it is nested inside.
Add a new 'image-pos' property to provide this information. Also add
some documentation for the -u option binman provides, which updates the
device tree with final entry information.
Since the image position is a better symbol to use for the position of
U-Boot as obtained by SPL, update the SPL symbols to use this instead of
offset, which might be incorrect if hierarchical sections are used.
Signed-off-by: Simon Glass <sjg@chromium.org>
After some thought, I believe there is an unfortunate naming flaw in
binman. Entries have a position and size, but now that we support
hierarchical sections it is unclear whether a position should be an
absolute position within the image, or a relative position within its
parent section.
At present 'position' actually means the relative position. This indicates
a need for an 'image position' for code that wants to find the location of
an entry without having to do calculations back through parents to
discover this image position.
A better name for the current 'position' or 'pos' is 'offset'. It is not
always an absolute position, but it is always an offset from its parent
offset.
It is unfortunate to rename this concept now, 18 months after binman was
introduced. However I believe it is the right thing to do. The impact is
mostly limited to binman itself and a few changes to in-tree users to
binman:
tegra
sunxi
x86
The change makes old binman definitions (e.g. downstream or out-of-tree)
incompatible if they use the 'pos = <...>' property. Later work will
adjust binman to generate an error when it is used.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to write the position and size of each entry back to the
device tree so that U-Boot can access this at runtime. Add a feature to
support this, along with associated tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Once binman has packed the image, the position and size of each entry is
known. It is then possible for binman to update the device tree with these
positions. Since placeholder values have been added, this does not affect
the size of the device tree and therefore the packing does not need to be
performed again.
Add a new SetCalculatedProperties method to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some entry types modify the device tree, e.g. to remove microcode or add a
property. So far this just modifies their local copy and does not affect
a 'shared' device tree.
Rather than doing this modification in the ObtainContents() method, and a
new ProcessFdt() method which is specifically designed to modify this
shared device tree.
Move the existing device-tree code over to use this method, reducing
ObtainContents() to the goal of just obtaining the contents without any
processing, even for device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to be able to see a list of regions in each image produced by
binman. Add a -m option to output this information in a '.map' file
alongside the image file.
Signed-off-by: Simon Glass <sjg@chromium.org>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <trini@konsulko.com>
Binman construct images consisting of multiple binary files. These files
sometimes need to know (at run timme) where their peers are located. For
example, SPL may want to know where U-Boot is located in the image, so
that it can jump to U-Boot correctly on boot.
In general the positions where the binaries end up after binman has
finished packing them cannot be known at compile time. One reason for
this is that binman does not know the size of the binaries until
everything is compiled, linked and converted to binaries with objcopy.
To make this work, we add a feature to binman which checks each binary
for symbol names starting with '_binman'. These are then decoded to figure
out which entry and property they refer to. Then binman writes the value
of this symbol into the appropriate binary. With this, the symbol will
have the correct value at run time.
Macros are used to make this easier to use. As an example, this declares
a symbol that will access the 'u-boot-spl' entry to find the 'pos' value
(i.e. the position of SPL in the image):
binman_sym_declare(unsigned long, u_boot_spl, pos);
This converts to a symbol called '_binman_u_boot_spl_prop_pos' in any
binary that includes it. Binman then updates the value in that binary,
ensuring that it can be accessed at runtime with:
ulong u_boot_pos = binman_sym(ulong, u_boot_spl, pos);
This assigns the variable u_boot_pos to the position of SPL in the image.
Signed-off-by: Simon Glass <sjg@chromium.org>
The elf module can provide some debugging information to assist with
figuring out what is going wrong. This is also useful in tests. Update the
-D option so that it is passed through to tests as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
This file was used to select between the normal and fallback libfdt
implementations. Now that we only have one, it is not needed.
Drop it and fix up all users.
Signed-off-by: Simon Glass <sjg@chromium.org>
This adds the basic code for binman, including command parsing, processing
of entries and generation of images.
So far no entry types are supported. These will be added in future commits
as examples of how to add new types.
See the README for documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass
Tom Rini