u-boot

Your ROOT_URL in app.ini is https://src.whiteboxsystems.nl/ but you are visiting http://src.whiteboxsystems.nl/Whitebox/u-boot/commits/commit/14142811f4c2d4da28e86ccb2375487f8dff02cb/include/fsl_usb.h You should set ROOT_URL correctly, otherwise the web may not work correctly.

Commit Graph

Author	SHA1	Message	Date
Rajesh Bhagat	7310ac4961	drivers:usb:fsl: Add T4080 as affected soc for Erratum A007792 sw workaround Apply Erratum A007792 sw workaround for T4080 Signed-off-by: Sriram Dash <sriram.dash@freescale.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>	9 years ago
Nikhil Badola	0dc78ff857	drivers: usb: fsl: Workaround for Erratum A004477 Add a delay of 1 microsecond before issuing soft reset to the controller to let ongoing ULPI transaction complete. This prevents corruption of ULPI Function Control Register which eventually prevents phy clock from entering to low power mode Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	10 years ago
Nikhil Badola	b4e78faab3	drivers:usb: Check if USB Erratum A005697 is applicable on BSC913x Check if USB Erratum A005697 is applicable on BSC913x and add corresponding property in the device tree via device tree fixup which is used by linux driver Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	10 years ago
Nikhil Badola	4a4323af3d	drivers:usb:fsl: Add affected SOCs for USB Erratum A007792 Add following affected SOCs and their personalities for USB Erratum A007792 : T1040 Rev 1.1 T1024 Rev 1.0 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	10 years ago
Nikhil Badola	0c77106095	drivers:usb: Add device-tree fixup to identify socs having dual phy Identify soc(s) having dual phy so as to add "utmi_dual" as phy_mode for all these socs. This is required for supporting deel-sleep feature in linux for usb driver Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	10 years ago
Nikhil Badola	da5ce448c7	drivers: usb: fsl: Check USB Erratum A007792 applicability Check USB Erratum A007792 applicability. If applicable, add corresponding property in the device tree via device tree fixup Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	10 years ago
Nikhil Badola	f3dff695e1	drivers : usb: fsl: Implement usb Erratum A007798 workaround Set TXFIFOTHRESH to adjust ddr pipeline delay for successful large usb writes Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	10 years ago
Nikhil Badola	c26c80a1a4	drivers: usb: fsl: Move USB Errata checking code Move USB Errata checking code from "arch/powerpc" to architecture independent file "fsl_usb.h" so that errata(s) become independent of the architecture. For each erratum checking function for PPC arch, define a nop function for non PPC arch for successful compilation in either case Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	10 years ago
Nikhil Badola	d1c561cd54	powerpc/mpc85xx: Add Differential SYSCLK config support T1040 Adds support for clock sourcing from sysclk(100MHz) for usb on T104xRDB and T1040QDS. This requires changing reference divisor and multiplication factor to derive usb clock from sysclk. Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	11 years ago
Suresh Gupta	9c641a872a	powerpc/usb: Workaround for erratum-A006261 USB spec says that the minimum disconnect threshold should be over 525 mV. However, internal USB PHY threshold value is below this specified value. Due to this some devices disconnect at run-time. Hence, phy settings are tweaked to increased disconnect threshold to be above 525mV by using this workaround. Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>	11 years ago
York Sun	49d87b1325	include/fsl_usb.h: Cleanup license header Replace license header with SPDX license identifier. Replace GPL-2.0 with GPL-2.0+. Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>	12 years ago
ramneek mehresh	9dee205d78	fsl/usb: Move USB internal phy definitions to fsl_usb.h fsl_usb.h file created to share data bewteen usb platform code and usb ip driver. Internal phy structure definitions moved to this file Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: York Sun <yorksun@freescale.com>	12 years ago

12 Commits (14142811f4c2d4da28e86ccb2375487f8dff02cb)