Your ROOT_URL in app.ini is https://src.whiteboxsystems.nl/ but you are visiting http://src.whiteboxsystems.nl/Whitebox/u-boot/commits/commit/2cdc778b62e46439dff84560a2def3032099f129/drivers/net/phy/ti.c You should set ROOT_URL correctly, otherwise the web may not work correctly.

6 Commits (2cdc778b62e46439dff84560a2def3032099f129)

Author	SHA1	Message	Date
Dan Murphy	0a71cd7729	net: phy: dp83867: Add SGMII helper for configuration ... The code assumed that if the interface is not RGMII configured then it must be SGMII configured. This device has the ability to support most of the MII interfaces. Therefore add the helper for SGMII and only configure the device if the interface is configured for SGMII. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>	9 years ago
Dan Murphy	3ab72fe807	net: phy: Move is_rgmii helper to phy.h ... Move the phy_interface_is_rgmii to the phy.h file for all phy's to be able to use the API. This now aligns with the Linux kernel based on commit e463d88c36d42211aa72ed76d32fb8bf37820ef1 Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>	9 years ago
Dan Murphy	085445ca41	net: phy: ti: Allow the driver to be more configurable ... Not all devices use the same internal delay or fifo depth. Add the ability to set the internal delay for rx or tx and the fifo depth via the devicetree. If the value is not set in the devicetree then set the delay to the default. If devicetree is not used then use the default defines within the driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>	9 years ago
Siva Durga Prasad Paladugu	85b949f40b	net: phy: Add SGMII support for TI phy ... Add support of SGMII to TI phy dp838367 Enable the SGMII and PCS settings in phy control, CFG2 and BIST registers Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>	9 years ago
Michal Simek	0179063273	net: phy: ti: Enable automatic crossover mode ... Enable automatic crossover cable detection. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>	9 years ago
Edgar E. Iglesias	721aed7912	net: phy: Add support for Texas Instruments DP83867 ... Code is taken from Linux kernel driver (v4.2). Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>	9 years ago