u-boot

Commit Graph

Author	SHA1	Message	Date
Paul Burton	e94136bd87	mips-relocs: Fix warning from gcc 6.3 It seems that gcc 6.3 at least is smart enough to warn about the _val variable being unassigned in the default case in the set_hdr_field() macro, but not smart enough to figure out that the default case is never taken. This results in warnings such as the following: pfx##hdr32[idx].field = _val; \ ^ ../tools/mips-relocs.c:51:11: note: _val was declared here uint64_t _val; \ ^ ../tools/mips-relocs.c:88:2: note: in expansion of macro set_hdr_field set_hdr_field(p, idx, field, val) ^~~~~~~~~~~~~ ../tools/mips-relocs.c:408:3: note: in expansion of macro set_phdr_field set_phdr_field(i, p_filesz, load_sz); ^~~~~~~~~~~~~~ ../tools/mips-relocs.c: In function main: ../tools/mips-relocs.c:77:25: warning: _val may be used uninitialized in this function [-Wmaybe-uninitialized] Avoid this by assigning _val = 0 in the default case, and asserting that we didn't actually hit it for good measure. For reference gcc 7.1.1 seems to be smart enough to not hit the above warning without this patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 011dd93ca97a ("MIPS: Stop building position independent code") Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: u-boot@lists.denx.de	8 years ago
Paul Burton	703ec9ddf9	MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>	8 years ago

Author

SHA1

Message

Date

Paul Burton

e94136bd87

mips-relocs: Fix warning from gcc 6.3

It seems that gcc 6.3 at least is smart enough to warn about the _val
variable being unassigned in the default case in the set_hdr_field()
macro, but not smart enough to figure out that the default case is never
taken. This results in warnings such as the following:

  pfx##hdr32[idx].field = _val;   \
                          ^
 ../tools/mips-relocs.c:51:11: note: _val was declared here
   uint64_t _val;      \
            ^
 ../tools/mips-relocs.c:88:2: note: in expansion of macro set_hdr_field
   set_hdr_field(p, idx, field, val)
   ^~~~~~~~~~~~~
 ../tools/mips-relocs.c:408:3: note: in expansion of macro set_phdr_field
    set_phdr_field(i, p_filesz, load_sz);
    ^~~~~~~~~~~~~~
 ../tools/mips-relocs.c: In function main:
 ../tools/mips-relocs.c:77:25: warning: _val may be used uninitialized
    in this function [-Wmaybe-uninitialized]

Avoid this by assigning _val = 0 in the default case, and asserting that
we didn't actually hit it for good measure.

For reference gcc 7.1.1 seems to be smart enough to not hit the above
warning without this patch.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 011dd93ca97a ("MIPS: Stop building position independent code")
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: u-boot@lists.denx.de

8 years ago

Paul Burton

703ec9ddf9

MIPS: Stop building position independent code

U-Boot has up until now built with -fpic for the MIPS architecture,
producing position independent code which uses indirection through a
global offset table, making relocation fairly straightforward as it
simply involves patching up GOT entries.

Using -fpic does however have some downsides. The biggest of these is
that generated code is bloated in various ways. For example, function
calls are indirected through the GOT & the t9 register:

  8f998064   lw     t9,-32668(gp)
  0320f809   jalr   t9

Without -fpic the call is simply:

  0f803f01   jal    be00fc04 <puts>

This is more compact & faster (due to the lack of the load & the
dependency the jump has on its result). It is also easier to read &
debug because the disassembly shows what function is being called,
rather than just an offset from gp which would then have to be looked up
in the ELF to discover the target function.

Another disadvantage of -fpic is that each function begins with a
sequence to calculate the value of the gp register, for example:

  3c1c0004   lui    gp,0x4
  279c3384   addiu  gp,gp,13188
  0399e021   addu   gp,gp,t9

Without using -fpic this sequence no longer appears at the start of each
function, reducing code size considerably.

This patch switches U-Boot from building with -fpic to building with
-fno-pic, in order to gain the benefits described above. The cost of
this is an extra step during the build process to extract relocation
data from the ELF & write it into a new .rel section in a compact
format, plus the added complexity of dealing with multiple types of
relocation rather than the single type that applied to the GOT. The
benefit is smaller, cleaner, more debuggable code. The relocate_code()
function is reimplemented in C to handle the new relocation scheme,
which also makes it easier to read & debug.

Taking maltael_defconfig as an example the size of u-boot.bin built
using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils
2.24.90) shrinks from 254KiB to 224KiB.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: u-boot@lists.denx.de
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

8 years ago

2 Commits (6def7de37ba2aeb3d59c561b288537d8c3712c73)