// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2011 Marek Vasut * * Based on code: * Copyright (C) 2005-2009 Samsung Electronics * Kyungmin Park */ #include #include #include #include /* * Device geometry: * - 2048b page, 128k erase block. * - 4096b page, 256k erase block. */ enum onenand_spl_pagesize { PAGE_2K = 2048, PAGE_4K = 4096, }; static unsigned int density_mask; #define ONENAND_PAGES_PER_BLOCK 64 #define onenand_sector_address(page) (page << 2) #define onenand_buffer_address() ((1 << 3) << 8) static inline int onenand_block_address(int block) { /* Device Flash Core select, NAND Flash Block Address */ if (block & density_mask) return ONENAND_DDP_CHIP1 | (block ^ density_mask); return block; } static inline int onenand_bufferram_address(int block) { /* Device BufferRAM Select */ if (block & density_mask) return ONENAND_DDP_CHIP1; return ONENAND_DDP_CHIP0; } static inline uint16_t onenand_readw(uint32_t addr) { return readw(CONFIG_SYS_ONENAND_BASE + addr); } static inline void onenand_writew(uint16_t value, uint32_t addr) { writew(value, CONFIG_SYS_ONENAND_BASE + addr); } static enum onenand_spl_pagesize onenand_spl_get_geometry(void) { unsigned int dev_id, density, size; if (!onenand_readw(ONENAND_REG_TECHNOLOGY)) { dev_id = onenand_readw(ONENAND_REG_DEVICE_ID); density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT; density &= ONENAND_DEVICE_DENSITY_MASK; if (density < ONENAND_DEVICE_DENSITY_4Gb) return PAGE_2K; if (dev_id & ONENAND_DEVICE_IS_DDP) { size = onenand_readw(ONENAND_REG_DATA_BUFFER_SIZE); density_mask = 1 << (18 + density - ffs(size)); return PAGE_2K; } } return PAGE_4K; } static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf, enum onenand_spl_pagesize pagesize) { const uint32_t addr = CONFIG_SYS_ONENAND_BASE + ONENAND_DATARAM; uint32_t offset; onenand_writew(onenand_block_address(block), ONENAND_REG_START_ADDRESS1); onenand_writew(onenand_bufferram_address(block), ONENAND_REG_START_ADDRESS2); onenand_writew(onenand_sector_address(page), ONENAND_REG_START_ADDRESS8); onenand_writew(onenand_buffer_address(), ONENAND_REG_START_BUFFER); onenand_writew(ONENAND_INT_CLEAR, ONENAND_REG_INTERRUPT); onenand_writew(ONENAND_CMD_READ, ONENAND_REG_COMMAND); while (!(onenand_readw(ONENAND_REG_INTERRUPT) & ONENAND_INT_READ)) continue; /* Check for invalid block mark */ if (page < 2 && (onenand_readw(ONENAND_SPARERAM) != 0xffff)) return 1; for (offset = 0; offset < pagesize; offset += 4) buf[offset / 4] = readl(addr + offset); return 0; } #ifdef CONFIG_SPL_UBI /* Temporary storage for non page aligned and non page sized reads. */ static u8 scratch_buf[PAGE_4K]; /** * onenand_spl_read_block - Read data from physical eraseblock into a buffer * @block: Number of the physical eraseblock * @offset: Data offset from the start of @peb * @len: Data size to read * @dst: Address of the destination buffer * * Notes: * @offset + @len are not allowed to be larger than a physical * erase block. No sanity check done for simplicity reasons. */ int onenand_spl_read_block(int block, int offset, int len, void *dst) { int page, read; static int psize; if (!psize) psize = onenand_spl_get_geometry(); /* Calculate the page number */ page = offset / psize; /* Offset to the start of a flash page */ offset = offset % psize; while (len) { /* * Non page aligned reads go to the scratch buffer. * Page aligned reads go directly to the destination. */ if (offset || len < psize) { onenand_spl_read_page(block, page, (uint32_t *)scratch_buf, psize); read = min(len, psize - offset); memcpy(dst, scratch_buf + offset, read); offset = 0; } else { onenand_spl_read_page(block, page, dst, psize); read = psize; } page++; len -= read; dst += read; } return 0; } #endif void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) { uint32_t *addr = (uint32_t *)dst; uint32_t to_page; uint32_t block; uint32_t page, rpage; enum onenand_spl_pagesize pagesize; int ret; pagesize = onenand_spl_get_geometry(); /* * The page can be either 2k or 4k, avoid using DIV_ROUND_UP to avoid * pulling further unwanted functions into the SPL. */ if (pagesize == 2048) { page = offs / 2048; to_page = page + DIV_ROUND_UP(size, 2048); } else { page = offs / 4096; to_page = page + DIV_ROUND_UP(size, 4096); } for (; page <= to_page; page++) { block = page / ONENAND_PAGES_PER_BLOCK; rpage = page & (ONENAND_PAGES_PER_BLOCK - 1); ret = onenand_spl_read_page(block, rpage, addr, pagesize); if (ret) page += ONENAND_PAGES_PER_BLOCK - 1; else addr += pagesize / 4; } }