Binman Entry Documentation =========================== This file describes the entry types supported by binman. These entry types can be placed in an image one by one to build up a final firmware image. It is fairly easy to create new entry types. Just add a new file to the 'etype' directory. You can use the existing entries as examples. Note that some entries are subclasses of others, using and extending their features to produce new behaviours. Entry: blob: Entry containing an arbitrary binary blob ------------------------------------------------------ Note: This should not be used by itself. It is normally used as a parent class by other entry types. Properties / Entry arguments: - filename: Filename of file to read into entry - compress: Compression algorithm to use: none: No compression lz4: Use lz4 compression (via 'lz4' command-line utility) This entry reads data from a file and places it in the entry. The default filename is often specified specified by the subclass. See for example the 'u_boot' entry which provides the filename 'u-boot.bin'. If compression is enabled, an extra 'uncomp-size' property is written to the node (if enabled with -u) which provides the uncompressed size of the data. Entry: blob-dtb: A blob that holds a device tree ------------------------------------------------ This is a blob containing a device tree. The contents of the blob are obtained from the list of available device-tree files, managed by the 'state' module. Entry: blob-named-by-arg: A blob entry which gets its filename property from its subclass ----------------------------------------------------------------------------------------- Properties / Entry arguments: - -path: Filename containing the contents of this entry (optional, defaults to 0) where is the blob_fname argument to the constructor. This entry cannot be used directly. Instead, it is used as a parent class for another entry, which defined blob_fname. This parameter is used to set the entry-arg or property containing the filename. The entry-arg or property is in turn used to set the actual filename. See cros_ec_rw for an example of this. Entry: cros-ec-rw: A blob entry which contains a Chromium OS read-write EC image -------------------------------------------------------------------------------- Properties / Entry arguments: - cros-ec-rw-path: Filename containing the EC image This entry holds a Chromium OS EC (embedded controller) image, for use in updating the EC on startup via software sync. Entry: files: Entry containing a set of files --------------------------------------------- Properties / Entry arguments: - pattern: Filename pattern to match the files to include - compress: Compression algorithm to use: none: No compression lz4: Use lz4 compression (via 'lz4' command-line utility) This entry reads a number of files and places each in a separate sub-entry within this entry. To access these you need to enable device-tree updates at run-time so you can obtain the file positions. Entry: fill: An entry which is filled to a particular byte value ---------------------------------------------------------------- Properties / Entry arguments: - fill-byte: Byte to use to fill the entry Note that the size property must be set since otherwise this entry does not know how large it should be. You can often achieve the same effect using the pad-byte property of the overall image, in that the space between entries will then be padded with that byte. But this entry is sometimes useful for explicitly setting the byte value of a region. Entry: fmap: An entry which contains an Fmap section ---------------------------------------------------- Properties / Entry arguments: None FMAP is a simple format used by flashrom, an open-source utility for reading and writing the SPI flash, typically on x86 CPUs. The format provides flashrom with a list of areas, so it knows what it in the flash. It can then read or write just a single area, instead of the whole flash. The format is defined by the flashrom project, in the file lib/fmap.h - see www.flashrom.org/Flashrom for more information. When used, this entry will be populated with an FMAP which reflects the entries in the current image. Note that any hierarchy is squashed, since FMAP does not support this. Entry: gbb: An entry which contains a Chromium OS Google Binary Block --------------------------------------------------------------------- Properties / Entry arguments: - hardware-id: Hardware ID to use for this build (a string) - keydir: Directory containing the public keys to use - bmpblk: Filename containing images used by recovery Chromium OS uses a GBB to store various pieces of information, in particular the root and recovery keys that are used to verify the boot process. Some more details are here: https://www.chromium.org/chromium-os/firmware-porting-guide/2-concepts but note that the page dates from 2013 so is quite out of date. See README.chromium for how to obtain the required keys and tools. Entry: intel-cmc: Entry containing an Intel Chipset Micro Code (CMC) file ------------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of file to read into entry This file contains microcode for some devices in a special format. An example filename is 'Microcode/C0_22211.BIN'. See README.x86 for information about x86 binary blobs. Entry: intel-descriptor: Intel flash descriptor block (4KB) ----------------------------------------------------------- Properties / Entry arguments: filename: Filename of file containing the descriptor. This is typically a 4KB binary file, sometimes called 'descriptor.bin' This entry is placed at the start of flash and provides information about the SPI flash regions. In particular it provides the base address and size of the ME (Management Engine) region, allowing us to place the ME binary in the right place. With this entry in your image, the position of the 'intel-me' entry will be fixed in the image, which avoids you needed to specify an offset for that region. This is useful, because it is not possible to change the position of the ME region without updating the descriptor. See README.x86 for information about x86 binary blobs. Entry: intel-fsp: Entry containing an Intel Firmware Support Package (FSP) file ------------------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of file to read into entry This file contains binary blobs which are used on some devices to make the platform work. U-Boot executes this code since it is not possible to set up the hardware using U-Boot open-source code. Documentation is typically not available in sufficient detail to allow this. An example filename is 'FSP/QUEENSBAY_FSP_GOLD_001_20-DECEMBER-2013.fd' See README.x86 for information about x86 binary blobs. Entry: intel-me: Entry containing an Intel Management Engine (ME) file ---------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of file to read into entry This file contains code used by the SoC that is required to make it work. The Management Engine is like a background task that runs things that are not clearly documented, but may include keyboard, deplay and network access. For platform that use ME it is not possible to disable it. U-Boot does not directly execute code in the ME binary. A typical filename is 'me.bin'. See README.x86 for information about x86 binary blobs. Entry: intel-mrc: Entry containing an Intel Memory Reference Code (MRC) file ---------------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of file to read into entry This file contains code for setting up the SDRAM on some Intel systems. This is executed by U-Boot when needed early during startup. A typical filename is 'mrc.bin'. See README.x86 for information about x86 binary blobs. Entry: intel-vbt: Entry containing an Intel Video BIOS Table (VBT) file ----------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of file to read into entry This file contains code that sets up the integrated graphics subsystem on some Intel SoCs. U-Boot executes this when the display is started up. See README.x86 for information about Intel binary blobs. Entry: intel-vga: Entry containing an Intel Video Graphics Adaptor (VGA) file ----------------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of file to read into entry This file contains code that sets up the integrated graphics subsystem on some Intel SoCs. U-Boot executes this when the display is started up. This is similar to the VBT file but in a different format. See README.x86 for information about Intel binary blobs. Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code for U-Boot ----------------------------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') This enrty is valid for PowerPC mpc85xx cpus. This entry holds 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'. Entry: section: Entry that contains other entries ------------------------------------------------- Properties / Entry arguments: (see binman README for more information) - size: Size of section in bytes - align-size: Align size to a particular power of two - pad-before: Add padding before the entry - pad-after: Add padding after the entry - pad-byte: Pad byte to use when padding - sort-by-offset: Reorder the entries by offset - end-at-4gb: Used to build an x86 ROM which ends at 4GB (2^32) - name-prefix: Adds a prefix to the name of every entry in the section when writing out the map A section is an entry which can contain other entries, thus allowing hierarchical images to be created. See 'Sections and hierarchical images' in the binman README for more information. Entry: text: An entry which contains text ----------------------------------------- The text can be provided either in the node itself or by a command-line argument. There is a level of indirection to allow multiple text strings and sharing of text. Properties / Entry arguments: text-label: The value of this string indicates the property / entry-arg that contains the string to place in the entry (actual name is the value of text-label): contains the string to place in the entry. Example node: text { size = <50>; text-label = "message"; }; You can then use: binman -amessage="this is my message" and binman will insert that string into the entry. It is also possible to put the string directly in the node: text { size = <8>; text-label = "message"; message = "a message directly in the node" }; The text is not itself nul-terminated. This can be achieved, if required, by setting the size of the entry to something larger than the text. Entry: u-boot: U-Boot flat binary --------------------------------- Properties / Entry arguments: - filename: Filename of u-boot.bin (default 'u-boot.bin') This is the U-Boot binary, containing relocation information to allow it to relocate itself at runtime. The binary typically includes a device tree blob at the end of it. Use u_boot_nodtb if you want to package the device tree separately. U-Boot can access binman symbols at runtime. See: 'Access to binman entry offsets at run time (fdt)' in the binman README for more information. Entry: u-boot-dtb: U-Boot device tree ------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot.dtb (default 'u-boot.dtb') This is the U-Boot device tree, containing configuration information for U-Boot. U-Boot needs this to know what devices are present and which drivers to activate. Note: This is mostly an internal entry type, used by others. This allows binman to know which entries contain a device tree. Entry: u-boot-dtb-with-ucode: A U-Boot device tree file, with the microcode removed ----------------------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot.dtb (default 'u-boot.dtb') See Entry_u_boot_ucode for full details of the three entries involved in this process. This entry provides the U-Boot device-tree file, which contains the microcode. If the microcode is not being collated into one place then the offset and size of the microcode is recorded by this entry, for use by u_boot_with_ucode_ptr. If it is being collated, then this entry deletes the microcode from the device tree (to save space) and makes it available to u_boot_ucode. Entry: u-boot-elf: U-Boot ELF image ----------------------------------- Properties / Entry arguments: - filename: Filename of u-boot (default 'u-boot') This is the U-Boot ELF image. It does not include a device tree but can be relocated to any address for execution. Entry: u-boot-img: U-Boot legacy image -------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot.img (default 'u-boot.img') This is the U-Boot binary as a packaged image, in legacy format. It has a header which allows it to be loaded at the correct address for execution. You should use FIT (Flat Image Tree) instead of the legacy image for new applications. Entry: u-boot-nodtb: U-Boot flat binary without device tree appended -------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot.bin (default 'u-boot-nodtb.bin') This is the U-Boot binary, containing relocation information to allow it to relocate itself at runtime. It does not include a device tree blob at the end of it so normally cannot work without it. You can add a u_boot_dtb entry after this one, or use a u_boot entry instead (which contains both U-Boot and the device tree). Entry: u-boot-spl: U-Boot SPL binary ------------------------------------ Properties / Entry arguments: - filename: Filename of u-boot-spl.bin (default 'spl/u-boot-spl.bin') This is the U-Boot SPL (Secondary Program Loader) binary. This is a small binary which loads before U-Boot proper, typically into on-chip SRAM. It is responsible for locating, loading and jumping to U-Boot. Note that SPL is not relocatable so must be loaded to the correct address in SRAM, or written to run from the correct address if direct flash execution is possible (e.g. on x86 devices). SPL can access binman symbols at runtime. See: 'Access to binman entry offsets at run time (symbols)' in the binman README for more information. The ELF file 'spl/u-boot-spl' must also be available for this to work, since binman uses that to look up symbols to write into the SPL binary. Entry: u-boot-spl-bss-pad: U-Boot SPL binary padded with a BSS region --------------------------------------------------------------------- Properties / Entry arguments: None This is similar to u_boot_spl except that padding is added after the SPL binary to cover the BSS (Block Started by Symbol) region. This region holds the various used by SPL. It is set to 0 by SPL when it starts up. If you want to append data to the SPL image (such as a device tree file), you must pad out the BSS region to avoid the data overlapping with U-Boot variables. This entry is useful in that case. It automatically pads out the entry size to cover both the code, data and BSS. The ELF file 'spl/u-boot-spl' must also be available for this to work, since binman uses that to look up the BSS address. Entry: u-boot-spl-dtb: U-Boot SPL device tree --------------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot.dtb (default 'spl/u-boot-spl.dtb') This is the SPL device tree, containing configuration information for SPL. SPL needs this to know what devices are present and which drivers to activate. Entry: u-boot-spl-elf: U-Boot SPL ELF image ------------------------------------------- Properties / Entry arguments: - filename: Filename of SPL u-boot (default 'spl/u-boot') This is the U-Boot SPL ELF image. It does not include a device tree but can be relocated to any address for execution. Entry: u-boot-spl-nodtb: SPL binary without device tree appended ---------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of spl/u-boot-spl-nodtb.bin (default 'spl/u-boot-spl-nodtb.bin') This is the U-Boot SPL binary, It does not include a device tree blob at the end of it so may not be able to work without it, assuming SPL needs a device tree to operation on your platform. You can add a u_boot_spl_dtb entry after this one, or use a u_boot_spl entry instead (which contains both SPL and the device tree). Entry: u-boot-spl-with-ucode-ptr: U-Boot SPL with embedded microcode pointer ---------------------------------------------------------------------------- This is used when SPL must set up the microcode for U-Boot. See Entry_u_boot_ucode for full details of the entries involved in this process. Entry: u-boot-tpl: U-Boot TPL binary ------------------------------------ Properties / Entry arguments: - filename: Filename of u-boot-tpl.bin (default 'tpl/u-boot-tpl.bin') This is the U-Boot TPL (Tertiary Program Loader) binary. This is a small binary which loads before SPL, typically into on-chip SRAM. It is responsible for locating, loading and jumping to SPL, the next-stage loader. Note that SPL is not relocatable so must be loaded to the correct address in SRAM, or written to run from the correct address if direct flash execution is possible (e.g. on x86 devices). SPL can access binman symbols at runtime. See: 'Access to binman entry offsets at run time (symbols)' in the binman README for more information. The ELF file 'tpl/u-boot-tpl' must also be available for this to work, since binman uses that to look up symbols to write into the TPL binary. Entry: u-boot-tpl-dtb: U-Boot TPL device tree --------------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot.dtb (default 'tpl/u-boot-tpl.dtb') This is the TPL device tree, containing configuration information for TPL. TPL needs this to know what devices are present and which drivers to activate. Entry: u-boot-tpl-dtb-with-ucode: U-Boot TPL with embedded microcode pointer ---------------------------------------------------------------------------- This is used when TPL must set up the microcode for U-Boot. See Entry_u_boot_ucode for full details of the entries involved in this process. Entry: u-boot-tpl-with-ucode-ptr: U-Boot TPL with embedded microcode pointer ---------------------------------------------------------------------------- See Entry_u_boot_ucode for full details of the entries involved in this process. Entry: u-boot-ucode: U-Boot microcode block ------------------------------------------- Properties / Entry arguments: None The contents of this entry are filled in automatically by other entries which must also be in the image. U-Boot on x86 needs a single block of microcode. This is collected from the various microcode update nodes in the device tree. It is also unable to read the microcode from the device tree on platforms that use FSP (Firmware Support Package) binaries, because the API requires that the microcode is supplied before there is any SRAM available to use (i.e. the FSP sets up the SRAM / cache-as-RAM but does so in the call that requires the microcode!). To keep things simple, all x86 platforms handle microcode the same way in U-Boot (even non-FSP platforms). This is that a table is placed at _dt_ucode_base_size containing the base address and size of the microcode. This is either passed to the FSP (for FSP platforms), or used to set up the microcode (for non-FSP platforms). This all happens in the build system since it is the only way to get the microcode into a single blob and accessible without SRAM. There are two cases to handle. If there is only one microcode blob in the device tree, then the ucode pointer it set to point to that. This entry (u-boot-ucode) is empty. If there is more than one update, then this entry holds the concatenation of all updates, and the device tree entry (u-boot-dtb-with-ucode) is updated to remove the microcode. This last step ensures that that the microcode appears in one contiguous block in the image and is not unnecessarily duplicated in the device tree. It is referred to as 'collation' here. Entry types that have a part to play in handling microcode: Entry_u_boot_with_ucode_ptr: Contains u-boot-nodtb.bin (i.e. U-Boot without the device tree). It updates it with the address and size of the microcode so that U-Boot can find it early on start-up. Entry_u_boot_dtb_with_ucode: Contains u-boot.dtb. It stores the microcode in a 'self.ucode_data' property, which is then read by this class to obtain the microcode if needed. If collation is performed, it removes the microcode from the device tree. Entry_u_boot_ucode: This class. If collation is enabled it reads the microcode from the Entry_u_boot_dtb_with_ucode entry, and uses it as the contents of this entry. Entry: u-boot-with-ucode-ptr: U-Boot with embedded microcode pointer -------------------------------------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot-nodtb.dtb (default 'u-boot-nodtb.dtb') - optional-ucode: boolean property to make microcode optional. If the u-boot.bin image does not include microcode, no error will be generated. See Entry_u_boot_ucode for full details of the three entries involved in this process. This entry updates U-Boot with the offset and size of the microcode, to allow early x86 boot code to find it without doing anything complicated. Otherwise it is the same as the u_boot entry. Entry: vblock: An entry which contains a Chromium OS verified boot block ------------------------------------------------------------------------ Properties / Entry arguments: - keydir: Directory containing the public keys to use - keyblock: Name of the key file to use (inside keydir) - signprivate: Name of provide key file to use (inside keydir) - version: Version number of the vblock (typically 1) - kernelkey: Name of the kernel key to use (inside keydir) - preamble-flags: Value of the vboot preamble flags (typically 0) Output files: - input. - input file passed to futility - vblock. - output file generated by futility (which is used as the entry contents) Chromium OS signs the read-write firmware and kernel, writing the signature in this block. This allows U-Boot to verify that the next firmware stage and kernel are genuine. Entry: x86-start16: x86 16-bit start-up code for U-Boot ------------------------------------------------------- Properties / Entry arguments: - filename: Filename of u-boot-x86-16bit.bin (default 'u-boot-x86-16bit.bin') x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code must be placed at a particular address. This entry holds that code. It is typically placed at offset CONFIG_SYS_X86_START16. The code is responsible for changing to 32-bit mode and jumping to U-Boot's entry point, which requires 32-bit mode (for 32-bit U-Boot). For 64-bit U-Boot, the 'x86_start16_spl' entry type is used instead. Entry: x86-start16-spl: x86 16-bit start-up code for SPL -------------------------------------------------------- Properties / Entry arguments: - filename: Filename of spl/u-boot-x86-16bit-spl.bin (default 'spl/u-boot-x86-16bit-spl.bin') x86 CPUs start up in 16-bit mode, even if they are 64-bit CPUs. This code must be placed at a particular address. This entry holds that code. It is typically placed at offset CONFIG_SYS_X86_START16. The code is responsible for changing to 32-bit mode and starting SPL, which in turn changes to 64-bit mode and jumps to U-Boot (for 64-bit U-Boot). For 32-bit U-Boot, the 'x86_start16' entry type is used instead. Entry: x86-start16-tpl: x86 16-bit start-up code for TPL -------------------------------------------------------- Properties / Entry arguments: - filename: Filename of tpl/u-boot-x86-16bit-tpl.bin (default 'tpl/u-boot-x86-16bit-tpl.bin') x86 CPUs start up in 16-bit mode, even if they are 64-bit CPUs. This code must be placed at a particular address. This entry holds that code. It is typically placed at offset CONFIG_SYS_X86_START16. The code is responsible for changing to 32-bit mode and starting TPL, which in turn jumps to SPL. If TPL is not being used, the 'x86_start16_spl or 'x86_start16' entry types may be used instead.