if OMAP34XX # We only enable the clocks for the GPIO banks that a given board requies. config OMAP3_GPIO_2 bool config OMAP3_GPIO_3 bool config OMAP3_GPIO_4 bool config OMAP3_GPIO_5 bool config OMAP3_GPIO_6 bool choice prompt "OMAP3 board select" optional config TARGET_AM3517_EVM bool "AM3517 EVM" select DM select DM_GPIO select DM_I2C select DM_MMC select DM_SERIAL imply CMD_DM config TARGET_MT_VENTOUX bool "TeeJet Mt.Ventoux" select OMAP3_GPIO_4 select OMAP3_GPIO_5 if USB_EHCI_HCD config TARGET_OMAP3_BEAGLE bool "TI OMAP3 BeagleBoard" select DM select DM_GPIO select DM_SERIAL select OMAP3_GPIO_5 select OMAP3_GPIO_6 imply CMD_DM config TARGET_CM_T35 bool "CompuLab CM-T3530 and CM-T3730 boards" select OMAP3_GPIO_2 select OMAP3_GPIO_5 select OMAP3_GPIO_6 if LED_STATUS config TARGET_CM_T3517 bool "CompuLab CM-T3517 boards" select OMAP3_GPIO_2 select OMAP3_GPIO_5 select OMAP3_GPIO_6 if LED_STATUS config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000" select DM select DM_GPIO select DM_SERIAL imply CMD_DM config TARGET_OMAP3_EVM bool "TI OMAP3 EVM" select DM select DM_GPIO select DM_SERIAL select OMAP3_GPIO_3 imply CMD_DM config TARGET_OMAP3_IGEP00X0 bool "IGEP" select DM select DM_GPIO select DM_SERIAL select OMAP3_GPIO_3 select OMAP3_GPIO_5 select OMAP3_GPIO_6 imply CMD_DM config TARGET_OMAP3_OVERO bool "OMAP35xx Gumstix Overo" select DM select DM_GPIO select DM_SERIAL select OMAP3_GPIO_2 select OMAP3_GPIO_3 select OMAP3_GPIO_4 select OMAP3_GPIO_5 select OMAP3_GPIO_6 imply CMD_DM config TARGET_OMAP3_ZOOM1 bool "TI Zoom1" select DM select DM_GPIO select DM_SERIAL imply CMD_DM config TARGET_AM3517_CRANE bool "am3517_crane" config TARGET_OMAP3_PANDORA bool "OMAP3 Pandora" select OMAP3_GPIO_4 select OMAP3_GPIO_6 config TARGET_ECO5PK bool "ECO5PK" select OMAP3_GPIO_5 if USB_EHCI_HCD config TARGET_TRICORDER bool "Tricorder" select OMAP3_GPIO_2 config TARGET_MCX bool "MCX" select BOARD_LATE_INIT select OMAP3_GPIO_2 if USB_EHCI_HCD select OMAP3_GPIO_5 if USB_EHCI_HCD config TARGET_OMAP3_LOGIC bool "OMAP3 Logic" select BOARD_LATE_INIT select DM select DM_GPIO select DM_SERIAL select OMAP3_GPIO_3 select OMAP3_GPIO_4 select OMAP3_GPIO_6 imply CMD_DM config TARGET_NOKIA_RX51 bool "Nokia RX51" config TARGET_TAO3530 bool "TAO3530" select OMAP3_GPIO_2 select OMAP3_GPIO_3 select OMAP3_GPIO_4 select OMAP3_GPIO_5 select OMAP3_GPIO_6 config TARGET_TWISTER bool "Twister" select OMAP3_GPIO_2 select OMAP3_GPIO_5 if USB_EHCI_HCD config TARGET_OMAP3_CAIRO bool "QUIPOS CAIRO" select DM select DM_GPIO select DM_SERIAL imply CMD_DM config TARGET_SNIPER bool "LG Optimus Black" select DM select DM_GPIO select DM_SERIAL select OMAP3_GPIO_2 select OMAP3_GPIO_3 select OMAP3_GPIO_4 select OMAP3_GPIO_5 select OMAP3_GPIO_6 imply CMD_DM endchoice choice prompt "Memory Controller" default SDRC config SDRC bool "SDRC controller" help The default memory controller on most OMAP3 boards is SDRC. config EMIF4 bool "EMIF4 controller" help Enable this on boards like AM3517 which use EMIF4 controller endchoice config SPL_OMAP3_ID_NAND bool "Support OMAP3-specific ID and MFR function" help Support for an OMAP3-specific set of functions to return the ID and MFR of the first attached NAND chip, if present. config SYS_SOC default "omap3" source "board/logicpd/am3517evm/Kconfig" source "board/teejet/mt_ventoux/Kconfig" source "board/ti/beagle/Kconfig" source "board/compulab/cm_t35/Kconfig" source "board/compulab/cm_t3517/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig" source "board/overo/Kconfig" source "board/logicpd/zoom1/Kconfig" source "board/ti/am3517crane/Kconfig" source "board/pandora/Kconfig" source "board/8dtech/eco5pk/Kconfig" source "board/corscience/tricorder/Kconfig" source "board/htkw/mcx/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" source "board/technexion/twister/Kconfig" source "board/quipos/cairo/Kconfig" source "board/lg/sniper/Kconfig" endif