// SPDX-License-Identifier: GPL-2.0+ /* * board/renesas/ulcb/ulcb.c * This file is ULCB board support. * * Copyright (C) 2017 Renesas Electronics Corporation */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; #define CPGWPCR 0xE6150904 #define CPGWPR 0xE615090C #define CLK2MHZ(clk) (clk / 1000 / 1000) void s_init(void) { struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; /* Watchdog init */ writel(0xA5A5A500, &rwdt->rwtcsra); writel(0xA5A5A500, &swdt->swtcsra); writel(0xA5A50000, CPGWPCR); writel(0xFFFFFFFF, CPGWPR); } #define GSX_MSTP112 BIT(12) /* 3DG */ #define TMU0_MSTP125 BIT(25) /* secure */ #define TMU1_MSTP124 BIT(24) /* non-secure */ #define SCIF2_MSTP310 BIT(10) /* SCIF2 */ #define DVFS_MSTP926 BIT(26) #define HSUSB_MSTP704 BIT(4) /* HSUSB */ int board_early_init_f(void) { /* TMU0,1 */ /* which use ? */ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124); #if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH) /* DVFS for reset */ mstp_clrbits_le32(MSTPSR9, SMSTPCR9, DVFS_MSTP926); #endif return 0; } /* SYSC */ /* R/- 32 Power status register 2(3DG) */ #define SYSC_PWRSR2 0xE6180100 /* -/W 32 Power resume control register 2 (3DG) */ #define SYSC_PWRONCR2 0xE618010C /* HSUSB block registers */ #define HSUSB_REG_LPSTS 0xE6590102 #define HSUSB_REG_LPSTS_SUSPM_NORMAL BIT(14) #define HSUSB_REG_UGCTRL2 0xE6590184 #define HSUSB_REG_UGCTRL2_USB0SEL 0x30 #define HSUSB_REG_UGCTRL2_USB0SEL_EHCI 0x10 int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; /* USB1 pull-up */ setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN); /* Configure the HSUSB block */ mstp_clrbits_le32(MSTPSR7, SMSTPCR7, HSUSB_MSTP704); /* Choice USB0SEL */ clrsetbits_le32(HSUSB_REG_UGCTRL2, HSUSB_REG_UGCTRL2_USB0SEL, HSUSB_REG_UGCTRL2_USB0SEL_EHCI); /* low power status */ setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL); return 0; } int dram_init(void) { if (fdtdec_setup_mem_size_base() != 0) return -EINVAL; return 0; } int dram_init_banksize(void) { fdtdec_setup_memory_banksize(); return 0; }