/* * Copyright 2008 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/pixis.h" #include "../common/sgmii_riser.h" phys_size_t fixed_sdram(void); int checkboard (void) { printf ("Board: MPC8536DS, System ID: 0x%02x, " "System Version: 0x%02x, FPGA Version: 0x%02x\n", in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), in8(PIXIS_BASE + PIXIS_PVER)); return 0; } phys_size_t initdram(int board_type) { phys_size_t dram_size = 0; puts("Initializing...."); #ifdef CONFIG_SPD_EEPROM dram_size = fsl_ddr_sdram(); #else dram_size = fixed_sdram(); #endif dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000; puts(" DDR: "); return dram_size; } #if !defined(CONFIG_SPD_EEPROM) /* * Fixed sdram init -- doesn't use serial presence detect. */ phys_size_t fixed_sdram (void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_ddr_t *ddr= &immap->im_ddr; uint d_init; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; #if defined (CONFIG_DDR_ECC) ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; ddr->err_sbe = CONFIG_SYS_DDR_SBE; #endif asm("sync;isync"); udelay(500); ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) d_init = 1; debug("DDR - 1st controller: memory initializing\n"); /* * Poll until memory is initialized. * 512 Meg at 400 might hit this 200 times or so. */ while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) { udelay(1000); } debug("DDR: memory initialized\n\n"); asm("sync; isync"); udelay(500); #endif return 512 * 1024 * 1024; } #endif #ifdef CONFIG_PCI1 static struct pci_controller pci1_hose; #endif #ifdef CONFIG_PCIE1 static struct pci_controller pcie1_hose; #endif #ifdef CONFIG_PCIE2 static struct pci_controller pcie2_hose; #endif #ifdef CONFIG_PCIE3 static struct pci_controller pcie3_hose; #endif extern int fsl_pci_setup_inbound_windows(struct pci_region *r); extern void fsl_pci_init(struct pci_controller *hose); int first_free_busno=0; void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint devdisr = gur->devdisr; uint sdrs2_io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; debug(" pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x,\ host_agent=%x\n", devdisr, sdrs2_io_sel, io_sel, host_agent); if (sdrs2_io_sel == 7) printf(" Serdes2 disalbed\n"); else if (sdrs2_io_sel == 4) { printf(" eTSEC1 is in sgmii mode.\n"); printf(" eTSEC3 is in sgmii mode.\n"); } else if (sdrs2_io_sel == 6) printf(" eTSEC1 is in sgmii mode.\n"); #ifdef CONFIG_PCIE3 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; struct pci_controller *hose = &pcie3_hose; int pcie_ep = (host_agent == 1); int pcie_configured = (io_sel == 7); struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE3 connected to Slot3 as %s (base address %x)", pcie_ep ? "End Point" : "Root Complex", (uint)pci); if (pci->pme_msg_det) { pci->pme_msg_det = 0xffffffff; debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); } printf ("\n"); /* inbound */ r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCIE3_MEM_BUS, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, CONFIG_SYS_PCIE3_IO_BUS, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); fsl_pci_init(hose); first_free_busno=hose->last_busno+1; printf (" PCIE3 on bus %02x - %02x\n", hose->first_busno,hose->last_busno); } else { printf (" PCIE3: disabled\n"); } } #else gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ #endif #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; int pcie_ep = (host_agent == 5); int pcie_configured = (io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 7); struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE1 connected to Slot1 as %s (base address %x)", pcie_ep ? "End Point" : "Root Complex", (uint)pci); if (pci->pme_msg_det) { pci->pme_msg_det = 0xffffffff; debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); } printf ("\n"); /* inbound */ r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, CONFIG_SYS_PCIE1_IO_BUS, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); #ifdef CONFIG_SYS_PCIE1_MEM_BUS2 /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCIE1_MEM_BUS2, CONFIG_SYS_PCIE1_MEM_PHYS2, CONFIG_SYS_PCIE1_MEM_SIZE2, PCI_REGION_MEM); #endif hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); fsl_pci_init(hose); first_free_busno=hose->last_busno+1; printf(" PCIE1 on bus %02x - %02x\n", hose->first_busno,hose->last_busno); } else { printf (" PCIE1: disabled\n"); } } #else gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ #endif #ifdef CONFIG_PCIE2 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; struct pci_controller *hose = &pcie2_hose; int pcie_ep = (host_agent == 3); int pcie_configured = (io_sel == 5 || io_sel == 7); struct pci_region *r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ printf ("\n PCIE2 connected to Slot 2 as %s (base address %x)", pcie_ep ? "End Point" : "Root Complex", (uint)pci); if (pci->pme_msg_det) { pci->pme_msg_det = 0xffffffff; debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); } printf ("\n"); /* inbound */ r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCIE2_MEM_BUS, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, CONFIG_SYS_PCIE2_IO_BUS, CONFIG_SYS_PCIE2_IO_PHYS, CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); #ifdef CONFIG_SYS_PCIE2_MEM_BUS2 /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCIE2_MEM_BUS2, CONFIG_SYS_PCIE2_MEM_PHYS2, CONFIG_SYS_PCIE2_MEM_SIZE2, PCI_REGION_MEM); #endif hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); fsl_pci_init(hose); first_free_busno=hose->last_busno+1; printf (" PCIE2 on bus %02x - %02x\n", hose->first_busno,hose->last_busno); } else { printf (" PCIE2: disabled\n"); } } #else gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ #endif #ifdef CONFIG_PCI1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; struct pci_controller *hose = &pci1_hose; struct pci_region *r = hose->regions; uint pci_agent = (host_agent == 6); uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */ uint pci_32 = 1; uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", pci_clk_sel ? "sync" : "async", pci_agent ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter", (uint)pci ); /* inbound */ r += fsl_pci_setup_inbound_windows(r); /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BUS, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, CONFIG_SYS_PCI1_IO_BUS, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); #ifdef CONFIG_SYS_PCI1_MEM_BUS2 /* outbound memory */ pci_set_region(r++, CONFIG_SYS_PCI1_MEM_BUS2, CONFIG_SYS_PCI1_MEM_PHYS2, CONFIG_SYS_PCI1_MEM_SIZE2, PCI_REGION_MEM); #endif hose->region_count = r - hose->regions; hose->first_busno=first_free_busno; pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); fsl_pci_init(hose); first_free_busno=hose->last_busno+1; printf ("PCI on bus %02x - %02x\n", hose->first_busno,hose->last_busno); } else { printf (" PCI: disabled\n"); } } #else gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ #endif } int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; const u8 flash_esel = 1; /* * Remap Boot flash + PROMJET region to caching-inhibited * so that flash can be erased properly. */ /* Flush d-cache and invalidate i-cache of any FLASH data */ flush_dcache(); invalidate_icache(); /* invalidate existing TLB entry for flash + promjet */ disable_tlb(flash_esel); set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */ return 0; } #ifdef CONFIG_GET_CLK_FROM_ICS307 /* decode S[0-2] to Output Divider (OD) */ static unsigned char ics307_S_to_OD[] = { 10, 2, 8, 4, 5, 7, 3, 6 }; /* Calculate frequency being generated by ICS307-02 clock chip based upon * the control bytes being programmed into it. */ /* XXX: This function should probably go into a common library */ static unsigned long ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2) { const unsigned long long InputFrequency = CONFIG_ICS307_REFCLK_HZ; unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); unsigned long RDW = cw2 & 0x7F; unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; unsigned long freq; /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 * cw1: V8 V7 V6 V5 V4 V3 V2 V1 * cw2: V0 R6 R5 R4 R3 R2 R1 R0 * * R6:R0 = Reference Divider Word (RDW) * V8:V0 = VCO Divider Word (VDW) * S2:S0 = Output Divider Select (OD) * F1:F0 = Function of CLK2 Output * TTL = duty cycle * C1:C0 = internal load capacitance for cyrstal */ /* Adding 1 to get a "nicely" rounded number, but this needs * more tweaking to get a "properly" rounded number. */ freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2, freq); return freq; } unsigned long get_board_sys_clk(ulong dummy) { return ics307_clk_freq ( in8(PIXIS_BASE + PIXIS_VSYSCLK0), in8(PIXIS_BASE + PIXIS_VSYSCLK1), in8(PIXIS_BASE + PIXIS_VSYSCLK2) ); } unsigned long get_board_ddr_clk(ulong dummy) { return ics307_clk_freq ( in8(PIXIS_BASE + PIXIS_VDDRCLK0), in8(PIXIS_BASE + PIXIS_VDDRCLK1), in8(PIXIS_BASE + PIXIS_VDDRCLK2) ); } #else unsigned long get_board_sys_clk(ulong dummy) { u8 i; ulong val = 0; i = in8(PIXIS_BASE + PIXIS_SPD); i &= 0x07; switch (i) { case 0: val = 33333333; break; case 1: val = 40000000; break; case 2: val = 50000000; break; case 3: val = 66666666; break; case 4: val = 83333333; break; case 5: val = 100000000; break; case 6: val = 133333333; break; case 7: val = 166666666; break; } return val; } unsigned long get_board_ddr_clk(ulong dummy) { u8 i; ulong val = 0; i = in8(PIXIS_BASE + PIXIS_SPD); i &= 0x38; i >>= 3; switch (i) { case 0: val = 33333333; break; case 1: val = 40000000; break; case 2: val = 50000000; break; case 3: val = 66666666; break; case 4: val = 83333333; break; case 5: val = 100000000; break; case 6: val = 133333333; break; case 7: val = 166666666; break; } return val; } #endif int sata_initialize(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint sdrs2_io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; if (sdrs2_io_sel & 0x04) return 1; return __sata_initialize(); } int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET struct tsec_info_struct tsec_info[2]; volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; uint sdrs2_io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; #ifdef CONFIG_TSEC1 SET_STD_TSEC_INFO(tsec_info[num], 1); if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) { tsec_info[num].phyaddr = 0; tsec_info[num].flags |= TSEC_SGMII; } num++; #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); if (sdrs2_io_sel == 4) { tsec_info[num].phyaddr = 1; tsec_info[num].flags |= TSEC_SGMII; } num++; #endif if (!num) { printf("No TSECs initialized\n"); return 0; } #ifdef CONFIG_FSL_SGMII_RISER if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) fsl_sgmii_riser_init(tsec_info, num); #endif tsec_eth_init(bis, tsec_info, num); #endif return pci_eth_init(bis); } #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_fsl_pci_setup(void *blob, const char *pci_alias, struct pci_controller *hose); void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI1 ft_fsl_pci_setup(blob, "pci0", &pci1_hose); #endif #ifdef CONFIG_PCIE2 ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); #endif #ifdef CONFIG_PCIE2 ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); #endif #ifdef CONFIG_PCIE1 ft_fsl_pci_setup(blob, "pci3", &pcie3_hose); #endif #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif } #endif