upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/dts/fsl-ls1012a-qds.dtsi

131 lines
1.9 KiB

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2016 Freescale Semiconductor
*/
/include/ "fsl-ls1012a.dtsi"
/ {
model = "LS1012A QDS Board";
aliases {
spi0 = &qspi;
spi1 = &dspi0;
};
};
&dspi0 {
bus-num = <0>;
status = "okay";
dflash0: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
};
dflash1: sst25wf040b {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3500000>;
reg = <1>;
};
dflash2: en25s64 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3500000>;
reg = <2>;
};
};
&qspi {
bus-num = <0>;
status = "okay";
qflash0: s25fl128s@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&i2c0 {
status = "okay";
pca9547@77 {
compatible = "philips,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
/* IRQ10_B */
interrupts = <0 150 0x4>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
eeprom@56 {
compatible = "at24,24c512";
reg = <0x56>;
};
eeprom@57 {
compatible = "at24,24c512";
reg = <0x57>;
};
adt7461a@4c {
compatible = "adt7461a";
reg = <0x4c>;
};
};
};
};
&duart0 {
status = "okay";
};
&usb0 {
status = "okay";
phy_type = "ulpi";
};
&sata {
status = "okay";
};