upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/dts/kirkwood-atl-sbx81lifkw.dts

133 lines
1.9 KiB

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Allied Telesis SBx81LIFKW Board";
compatible = "atl,SBx81LIFKW", "marvell,kirkwood-88f6281",
"marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x08000000>; /* 128 MB */
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
aliases {
ethernet0 = &eth0;
i2c0 = &i2c0;
spi0 = &spi0;
};
dsa {
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
dsa,ethernet = <&eth0>;
dsa,mii-bus = <&mdio>;
status = "okay";
switch@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1 0>;
port@0 {
reg = <0>;
label = "internal0";
};
port@1 {
reg = <1>;
label = "internal1";
};
port@8 {
reg = <8>;
label = "internal8";
phy-mode = "rgmii-id";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@9 {
reg = <9>;
label = "internal9";
phy-mode = "rgmii-id";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@10 {
reg = <10>;
label = "cpu";
};
};
};
};
&spi0 {
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
partition@u-boot {
reg = <0x00000000 0x00c00000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x00c00000 0x00040000>;
label = "u-boot-env";
};
partition@unused {
reg = <0x00100000 0x00f00000>;
label = "unused";
};
};
};
&i2c0 {
status = "okay";
eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
};
&uart0 {
status = "okay";
};
&mdio {
status = "okay";
};
&eth0 {
status = "okay";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};