upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/mach-sunxi/clock_sun9i.c

209 lines
5.5 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* sun9i specific clock code
*
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
*
* (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
* Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/prcm.h>
#include <asm/arch/sys_proto.h>
#ifdef CONFIG_SPL_BUILD
void clock_init_safe(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* Set up PLL12 (peripheral 1) */
clock_set_pll12(1200000000);
/* Set up PLL1 (cluster 0) and PLL2 (cluster 1) */
clock_set_pll1(408000000);
clock_set_pll2(408000000);
/* Set up PLL4 (peripheral 0) */
clock_set_pll4(960000000);
/* Set up dividers for AXI0 and APB0 on cluster 0: PLL1 / 2 = 204MHz */
writel(C0_CFG_AXI0_CLK_DIV_RATIO(2) |
C0_CFG_APB0_CLK_DIV_RATIO(2), &ccm->c0_cfg);
/* AHB0: 120 MHz (PLL_PERIPH0 / 8) */
writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
&ccm->ahb0_cfg);
/* AHB1: 240 MHz (PLL_PERIPH0 / 4) */
writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(4),
&ccm->ahb1_cfg);
/* AHB2: 120 MHz (PLL_PERIPH0 / 8) */
writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
&ccm->ahb2_cfg);
/* APB0: 120 MHz (PLL_PERIPH0 / 8) */
writel(APB0_SRC_PLL_PERIPH0 | APB0_CLK_DIV_RATIO(8),
&ccm->apb0_cfg);
/* GTBUS: 400MHz (PERIPH0 div 3) */
writel(GTBUS_SRC_PLL_PERIPH1 | GTBUS_CLK_DIV_RATIO(3),
&ccm->gtbus_cfg);
/* CCI400: 480MHz (PERIPH1 div 2) */
writel(CCI400_SRC_PLL_PERIPH0 | CCI400_CLK_DIV_RATIO(2),
&ccm->cci400_cfg);
/* Deassert DMA reset and open clock gating for DMA */
setbits_le32(&ccm->ahb_reset1_cfg, (1 << 24));
setbits_le32(&ccm->apb1_gate, (1 << 24));
/* set enable-bit in TSTAMP_CTRL_REG */
writel(1, 0x01720000);
}
#endif
void clock_init_uart(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* open the clock for uart */
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
/* deassert uart reset */
setbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
}
#ifdef CONFIG_SPL_BUILD
void clock_set_pll1(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
/* Switch cluster 0 to 24MHz clock while changing PLL1 */
clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
C0_CPUX_CLK_SRC_OSC24M);
writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
CCM_PLL1_CLOCK_TIME_2 |
CCM_PLL1_CTRL_N(clk / 24000000),
&ccm->pll1_c0_cfg);
/*
* Don't bother with the stable-time registers, as it doesn't
* wait until the PLL is stable. Note, that even Allwinner
* just uses a delay loop (or rather the AVS timer) for this
* instead of the PLL_STABLE_STATUS register.
*/
sdelay(2000);
/* Switch cluster 0 back to PLL1 */
clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
C0_CPUX_CLK_SRC_PLL1);
}
void clock_set_pll2(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
/* Switch cluster 1 to 24MHz clock while changing PLL2 */
clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
C1_CPUX_CLK_SRC_OSC24M);
writel(CCM_PLL2_CTRL_EN | CCM_PLL2_CTRL_P(p) |
CCM_PLL2_CLOCK_TIME_2 | CCM_PLL2_CTRL_N(clk / 24000000),
&ccm->pll2_c1_cfg);
sdelay(2000);
/* Switch cluster 1 back to PLL2 */
clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
C1_CPUX_CLK_SRC_PLL2);
}
void clock_set_pll6(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
writel(CCM_PLL6_CTRL_EN | CCM_PLL6_CFG_UPDATE | CCM_PLL6_CTRL_P(p)
| CCM_PLL6_CTRL_N(clk / 24000000),
&ccm->pll6_ddr_cfg);
do { } while (!(readl(&ccm->pll_stable_status) & PLL_DDR_STATUS));
sdelay(2000);
}
void clock_set_pll12(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (readl(&ccm->pll12_periph1_cfg) & CCM_PLL12_CTRL_EN)
return;
writel(CCM_PLL12_CTRL_EN | CCM_PLL12_CTRL_N(clk / 24000000),
&ccm->pll12_periph1_cfg);
sdelay(2000);
}
void clock_set_pll4(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
writel(CCM_PLL4_CTRL_EN | CCM_PLL4_CTRL_N(clk / 24000000),
&ccm->pll4_periph0_cfg);
sdelay(2000);
}
#endif
int clock_twi_onoff(int port, int state)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (port > 4)
return -1;
/* set the apb reset and clock gate for twi */
if (state) {
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
setbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_TWI_SHIFT + port));
} else {
clrbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_TWI_SHIFT + port));
clrbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
}
return 0;
}
unsigned int clock_get_pll4_periph0(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
uint32_t rval = readl(&ccm->pll4_periph0_cfg);
int n = ((rval & CCM_PLL4_CTRL_N_MASK) >> CCM_PLL4_CTRL_N_SHIFT);
int p = ((rval & CCM_PLL4_CTRL_P_MASK) >> CCM_PLL4_CTRL_P_SHIFT);
int m = ((rval & CCM_PLL4_CTRL_M_MASK) >> CCM_PLL4_CTRL_M_SHIFT) + 1;
const int k = 1;
return ((24000000 * n * k) >> p) / m;
}