upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/sandbox/include/asm/gpio.h

85 lines
2.5 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* This is the interface to the sandbox GPIO driver for test code which
* wants to change the GPIO values reported to U-Boot.
*
* Copyright (c) 2011 The Chromium OS Authors.
*/
#ifndef __ASM_SANDBOX_GPIO_H
#define __ASM_SANDBOX_GPIO_H
/*
* We use the generic interface, and add a back-channel.
*
* The back-channel functions are declared in this file. They should not be used
* except in test code.
*
* Test code can, for example, call sandbox_gpio_set_value() to set the value of
* a simulated GPIO. From then on, normal code in U-Boot will see this new
* value when it calls gpio_get_value().
*
* NOTE: DO NOT use the functions in this file except in test code!
*/
#include <asm-generic/gpio.h>
/**
* Return the simulated value of a GPIO (used only in sandbox test code)
*
* @param dev device to use
* @param offset GPIO offset within bank
* @return -1 on error, 0 if GPIO is low, >0 if high
*/
int sandbox_gpio_get_value(struct udevice *dev, unsigned int offset);
/**
* Set the simulated value of a GPIO (used only in sandbox test code)
*
* @param dev device to use
* @param offset GPIO offset within bank
* @param value value to set (0 for low, non-zero for high)
* @return -1 on error, 0 if ok
*/
int sandbox_gpio_set_value(struct udevice *dev, unsigned int offset, int value);
/**
* Set or reset the simulated open drain mode of a GPIO (used only in sandbox
* test code)
*
* @param gp GPIO number
* @param value value to set (0 for enabled open drain mode, non-zero for
* disabled)
* @return -1 on error, 0 if ok
*/
int sandbox_gpio_set_open_drain(struct udevice *dev, unsigned offset, int value);
/**
* Return the state of the simulated open drain mode of a GPIO (used only in
* sandbox test code)
*
* @param gp GPIO number
* @return -1 on error, 0 if GPIO is input, >0 if output
*/
int sandbox_gpio_get_open_drain(struct udevice *dev, unsigned offset);
/**
* Return the simulated direction of a GPIO (used only in sandbox test code)
*
* @param dev device to use
* @param offset GPIO offset within bank
* @return -1 on error, 0 if GPIO is input, >0 if output
*/
int sandbox_gpio_get_direction(struct udevice *dev, unsigned int offset);
/**
* Set the simulated direction of a GPIO (used only in sandbox test code)
*
* @param dev device to use
* @param offset GPIO offset within bank
* @param output 0 to set as input, 1 to set as output
* @return -1 on error, 0 if ok
*/
int sandbox_gpio_set_direction(struct udevice *dev, unsigned int offset,
int output);
#endif