upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/configs/theadorable_debug_defconfig

74 lines
1.7 KiB

CONFIG_ARM=y
CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_THEADORABLE=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y
# CONFIG_PARTITION_UUIDS is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_SATA_MV=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_FPGA_ALTERA=y
CONFIG_DM_GPIO=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_GIGE=y
CONFIG_MVNETA=y
CONFIG_MII=y
CONFIG_PCI=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_KIRKWOOD_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_MVEBU=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set