upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/device-tree-bindings/regulator/max77686.txt

70 lines
1.6 KiB

MAXIM, MAX77686 regulators
This device uses two drivers:
- drivers/power/pmic/max77686.c (as parent I/O device)
- drivers/power/regulator/max77686.c (for child regulators)
This file describes the binding info for the REGULATOR driver.
First, please read the binding info for the pmic:
- doc/device-tree-bindings/pmic/max77686.txt
Required subnode:
- voltage-regulators: required for the PMIC driver
Required properties:
- regulator-name: used for regulator uclass platform data '.name'
Optional:
- regulator-min-microvolt: minimum allowed Voltage to set
- regulator-max-microvolt: minimum allowed Voltage to set
- regulator-always-on: regulator should be never disabled
- regulator-boot-on: regulator should be enabled by the bootloader
Example:
(subnode of max77686 pmic node)
voltage-regulators {
ldo1 {
regulator-name = "VDD_ALIVE_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
ldo2 {
regulator-name = "VDDQ_VM1M2_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
.
.
.
ldo26 {
regulator-name = "nc";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
};
buck1 {
regulator-compatible = "BUCK1";
regulator-name = "VDD_MIF_1.0V";
regulator-min-microvolt = <8500000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
.
.
.
buck9 {
regulator-compatible = "BUCK9";
regulator-name = "nc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};