upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/misc/gdsys_ioep.h

137 lines
4.9 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2018
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
*/
#ifndef __GDSYS_IOEP_H_
#define __GDSYS_IOEP_H_
/**
* struct io_generic_packet - header structure for GDSYS IOEP packets
* @target_address: Target protocol address of the packet.
* @source_address: Source protocol address of the packet.
* @packet_type: Packet type.
* @bc: Block counter (filled in by FPGA).
* @packet_length: Length of the packet's payload bytes.
*/
struct io_generic_packet {
u16 target_address;
u16 source_address;
u8 packet_type;
u8 bc;
u16 packet_length;
} __attribute__((__packed__));
/**
* struct gdsys_ioep_regs - Registers of a IOEP device
* @transmit_data: Register that receives data to be sent
* @tx_control: TX control register
* @receive_data: Register filled with the received data
* @rx_tx_status: RX/TX status register
* @device_address: Register for setting/reading the device's address
* @target_address: Register for setting/reading the remote endpoint's address
* @int_enable: Interrupt/Interrupt enable register
*/
struct gdsys_ioep_regs {
u16 transmit_data;
u16 tx_control;
u16 receive_data;
u16 rx_tx_status;
u16 device_address;
u16 target_address;
u16 int_enable;
};
/**
* gdsys_ioep_set() - Convenience macro to write registers of a IOEP device
* @map: Register map to write the value in
* @member: Name of the member in the gdsys_ioep_regs structure to write
* @val: Value to write to the register
*/
#define gdsys_ioep_set(map, member, val) \
regmap_set(map, struct gdsys_ioep_regs, member, val)
/**
* gdsys_ioep_get() - Convenience macro to read registers of a IOEP device
* @map: Register map to read the value from
* @member: Name of the member in the gdsys_ioep_regs structure to read
* @valp: Pointer to buffer to read the register value into
*/
#define gdsys_ioep_get(map, member, valp) \
regmap_get(map, struct gdsys_ioep_regs, member, valp)
/**
* enum rx_tx_status_values - Enum to describe the fields of the rx_tx_status
* register
* @STATE_TX_PACKET_BUILDING: The device is currently building a packet
* (and accepting data for it)
* @STATE_TX_TRANSMITTING: A packet is currenly being transmitted
* @STATE_TX_BUFFER_FULL: The TX buffer is full
* @STATE_TX_ERR: A TX error occurred
* @STATE_RECEIVE_TIMEOUT: A receive timeout occurred
* @STATE_PROC_RX_STORE_TIMEOUT: A RX store timeout for a processor packet
* occurred
* @STATE_PROC_RX_RECEIVE_TIMEOUT: A RX receive timeout for a processor packet
* occurred
* @STATE_RX_DIST_ERR: A error occurred in the distribution block
* @STATE_RX_LENGTH_ERR: A length invalid error occurred
* @STATE_RX_FRAME_CTR_ERR: A frame count error occurred (two
* non-increasing frame count numbers
* encountered)
* @STATE_RX_FCS_ERR: A CRC error occurred
* @STATE_RX_PACKET_DROPPED: A RX packet has been dropped
* @STATE_RX_DATA_LAST: The data to be read is the final data of the
* current packet
* @STATE_RX_DATA_FIRST: The data to be read is the first data of the
* current packet
* @STATE_RX_DATA_AVAILABLE: RX data is available to be read
*/
enum rx_tx_status_values {
STATE_TX_PACKET_BUILDING = BIT(0),
STATE_TX_TRANSMITTING = BIT(1),
STATE_TX_BUFFER_FULL = BIT(2),
STATE_TX_ERR = BIT(3),
STATE_RECEIVE_TIMEOUT = BIT(4),
STATE_PROC_RX_STORE_TIMEOUT = BIT(5),
STATE_PROC_RX_RECEIVE_TIMEOUT = BIT(6),
STATE_RX_DIST_ERR = BIT(7),
STATE_RX_LENGTH_ERR = BIT(8),
STATE_RX_FRAME_CTR_ERR = BIT(9),
STATE_RX_FCS_ERR = BIT(10),
STATE_RX_PACKET_DROPPED = BIT(11),
STATE_RX_DATA_LAST = BIT(12),
STATE_RX_DATA_FIRST = BIT(13),
STATE_RX_DATA_AVAILABLE = BIT(15),
};
/**
* enum tx_control_values - Enum to describe the fields of the tx_control
* register
* @CTRL_PROC_RECEIVE_ENABLE: Enable packet reception for the processor
* @CTRL_FLUSH_TRANSMIT_BUFFER: Flush the transmit buffer (and send packet data)
*/
enum tx_control_values {
CTRL_PROC_RECEIVE_ENABLE = BIT(12),
CTRL_FLUSH_TRANSMIT_BUFFER = BIT(15),
};
/**
* enum int_enable_values - Enum to describe the fields of the int_enable
* register
* @IRQ_CPU_TRANSMITBUFFER_FREE_STATUS: The transmit buffer is free (packet
* data can be transmitted to the
* device)
* @IRQ_CPU_PACKET_TRANSMITTED_EVENT: A packet has been transmitted
* @IRQ_NEW_CPU_PACKET_RECEIVED_EVENT: A new packet has been received
* @IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS: RX packet data are available to be
* read
*/
enum int_enable_values {
IRQ_CPU_TRANSMITBUFFER_FREE_STATUS = BIT(5),
IRQ_CPU_PACKET_TRANSMITTED_EVENT = BIT(6),
IRQ_NEW_CPU_PACKET_RECEIVED_EVENT = BIT(7),
IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS = BIT(8),
};
#endif /* __GDSYS_IOEP_H_ */