upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/fsl_mcdmafec.c

579 lines
16 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*/
#include <common.h>
#include <environment.h>
#include <malloc.h>
#include <command.h>
#include <config.h>
#include <net.h>
#include <miiphy.h>
#undef ET_DEBUG
#undef MII_DEBUG
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
#define PKT_MAXBUF_SIZE 1518
#define PKT_MINBUF_SIZE 64
#define PKT_MAXBLR_SIZE 1536
#define LAST_PKTBUFSRX PKTBUFSRX - 1
#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST)
#define FIFO_ERRSTAT (FIFO_STAT_RXW | FIFO_STAT_UF | FIFO_STAT_OF)
/* RxBD bits definitions */
#define BD_ENET_RX_ERR (BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \
BD_ENET_RX_OV | BD_ENET_RX_TR)
#include <asm/immap.h>
#include <asm/fsl_mcdmafec.h>
#include "MCD_dma.h"
struct fec_info_dma fec_info[] = {
#ifdef CONFIG_SYS_FEC0_IOBASE
{
0, /* index */
CONFIG_SYS_FEC0_IOBASE, /* io base */
CONFIG_SYS_FEC0_PINMUX, /* gpio pin muxing */
CONFIG_SYS_FEC0_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
0, /* phyname init */
0, /* RX BD */
0, /* TX BD */
0, /* rx Index */
0, /* tx Index */
0, /* tx buffer */
0, /* initialized flag */
(struct fec_info_dma *)-1, /* next */
FEC0_RX_TASK, /* rxTask */
FEC0_TX_TASK, /* txTask */
FEC0_RX_PRIORITY, /* rxPri */
FEC0_TX_PRIORITY, /* txPri */
FEC0_RX_INIT, /* rxInit */
FEC0_TX_INIT, /* txInit */
0, /* usedTbdIndex */
0, /* cleanTbdNum */
},
#endif
#ifdef CONFIG_SYS_FEC1_IOBASE
{
1, /* index */
CONFIG_SYS_FEC1_IOBASE, /* io base */
CONFIG_SYS_FEC1_PINMUX, /* gpio pin muxing */
CONFIG_SYS_FEC1_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
0, /* phy name init */
#ifdef CONFIG_SYS_DMA_USE_INTSRAM
(cbd_t *)DBUF_LENGTH, /* RX BD */
#else
0, /* RX BD */
#endif
0, /* TX BD */
0, /* rx Index */
0, /* tx Index */
0, /* tx buffer */
0, /* initialized flag */
(struct fec_info_dma *)-1, /* next */
FEC1_RX_TASK, /* rxTask */
FEC1_TX_TASK, /* txTask */
FEC1_RX_PRIORITY, /* rxPri */
FEC1_TX_PRIORITY, /* txPri */
FEC1_RX_INIT, /* rxInit */
FEC1_TX_INIT, /* txInit */
0, /* usedTbdIndex */
0, /* cleanTbdNum */
}
#endif
};
static int fec_send(struct eth_device *dev, void *packet, int length);
static int fec_recv(struct eth_device *dev);
static int fec_init(struct eth_device *dev, bd_t * bd);
static void fec_halt(struct eth_device *dev);
#ifdef ET_DEBUG
static void dbg_fec_regs(struct eth_device *dev)
{
struct fec_info_dma *info = dev->priv;
volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
printf("=====\n");
printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir);
printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr);
printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr);
printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr);
printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr);
printf("r hash %x - %x\n", (int)&fecp->rhr, fecp->rhr);
printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr);
printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr);
printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur);
printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd);
printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur);
printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr);
printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur);
printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr);
printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
printf("r_fdata %x - %x\n", (int)&fecp->rfdr, fecp->rfdr);
printf("r_fstat %x - %x\n", (int)&fecp->rfsr, fecp->rfsr);
printf("r_fctrl %x - %x\n", (int)&fecp->rfcr, fecp->rfcr);
printf("r_flrfp %x - %x\n", (int)&fecp->rlrfp, fecp->rlrfp);
printf("r_flwfp %x - %x\n", (int)&fecp->rlwfp, fecp->rlwfp);
printf("r_frfar %x - %x\n", (int)&fecp->rfar, fecp->rfar);
printf("r_frfrp %x - %x\n", (int)&fecp->rfrp, fecp->rfrp);
printf("r_frfwp %x - %x\n", (int)&fecp->rfwp, fecp->rfwp);
printf("t_fdata %x - %x\n", (int)&fecp->tfdr, fecp->tfdr);
printf("t_fstat %x - %x\n", (int)&fecp->tfsr, fecp->tfsr);
printf("t_fctrl %x - %x\n", (int)&fecp->tfcr, fecp->tfcr);
printf("t_flrfp %x - %x\n", (int)&fecp->tlrfp, fecp->tlrfp);
printf("t_flwfp %x - %x\n", (int)&fecp->tlwfp, fecp->tlwfp);
printf("t_ftfar %x - %x\n", (int)&fecp->tfar, fecp->tfar);
printf("t_ftfrp %x - %x\n", (int)&fecp->tfrp, fecp->tfrp);
printf("t_ftfwp %x - %x\n", (int)&fecp->tfwp, fecp->tfwp);
printf("frst %x - %x\n", (int)&fecp->frst, fecp->frst);
printf("ctcwr %x - %x\n", (int)&fecp->ctcwr, fecp->ctcwr);
}
#endif
static void set_fec_duplex_speed(volatile fecdma_t * fecp, bd_t * bd,
int dup_spd)
{
if ((dup_spd >> 16) == FULL) {
/* Set maximum frame length */
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
FEC_RCR_PROM | 0x100;
fecp->tcr = FEC_TCR_FDEN;
} else {
/* Half duplex mode */
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
FEC_RCR_MII_MODE | FEC_RCR_DRT;
fecp->tcr &= ~FEC_TCR_FDEN;
}
if ((dup_spd & 0xFFFF) == _100BASET) {
#ifdef MII_DEBUG
printf("100Mbps\n");
#endif
bd->bi_ethspeed = 100;
} else {
#ifdef MII_DEBUG
printf("10Mbps\n");
#endif
bd->bi_ethspeed = 10;
}
}
static int fec_send(struct eth_device *dev, void *packet, int length)
{
struct fec_info_dma *info = dev->priv;
cbd_t *pTbd, *pUsedTbd;
u16 phyStatus;
miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
/* process all the consumed TBDs */
while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
pUsedTbd = &info->txbd[info->usedTbdIdx];
if (pUsedTbd->cbd_sc & BD_ENET_TX_READY) {
#ifdef ET_DEBUG
printf("Cannot clean TBD %d, in use\n",
info->cleanTbdNum);
#endif
return 0;
}
/* clean this buffer descriptor */
if (info->usedTbdIdx == (CONFIG_SYS_TX_ETH_BUFFER - 1))
pUsedTbd->cbd_sc = BD_ENET_TX_WRAP;
else
pUsedTbd->cbd_sc = 0;
/* update some indeces for a correct handling of the TBD ring */
info->cleanTbdNum++;
info->usedTbdIdx = (info->usedTbdIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
}
/* Check for valid length of data. */
if ((length > 1500) || (length <= 0)) {
return -1;
}
/* Check the number of vacant TxBDs. */
if (info->cleanTbdNum < 1) {
printf("No available TxBDs ...\n");
return -1;
}
/* Get the first TxBD to send the mac header */
pTbd = &info->txbd[info->txIdx];
pTbd->cbd_datlen = length;
pTbd->cbd_bufaddr = (u32) packet;
pTbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
info->txIdx = (info->txIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
/* Enable DMA transmit task */
MCD_continDma(info->txTask);
info->cleanTbdNum -= 1;
/* wait until frame is sent . */
while (pTbd->cbd_sc & BD_ENET_TX_READY) {
udelay(10);
}
return (int)(info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS);
}
static int fec_recv(struct eth_device *dev)
{
struct fec_info_dma *info = dev->priv;
volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
cbd_t *prbd = &info->rxbd[info->rxIdx];
u32 ievent;
int frame_length, len = 0;
/* Check if any critical events have happened */
ievent = fecp->eir;
if (ievent != 0) {
fecp->eir = ievent;
if (ievent & (FEC_EIR_BABT | FEC_EIR_TXERR | FEC_EIR_RXERR)) {
printf("fec_recv: error\n");
fec_halt(dev);
fec_init(dev, NULL);
return 0;
}
if (ievent & FEC_EIR_HBERR) {
/* Heartbeat error */
fecp->tcr |= FEC_TCR_GTS;
}
if (ievent & FEC_EIR_GRA) {
/* Graceful stop complete */
if (fecp->tcr & FEC_TCR_GTS) {
printf("fec_recv: tcr_gts\n");
fec_halt(dev);
fecp->tcr &= ~FEC_TCR_GTS;
fec_init(dev, NULL);
}
}
}
if (!(prbd->cbd_sc & BD_ENET_RX_EMPTY)) {
if ((prbd->cbd_sc & BD_ENET_RX_LAST) &&
!(prbd->cbd_sc & BD_ENET_RX_ERR) &&
((prbd->cbd_datlen - 4) > 14)) {
/* Get buffer address and size */
frame_length = prbd->cbd_datlen - 4;
/* Fill the buffer and pass it to upper layers */
net_process_received_packet((uchar *)prbd->cbd_bufaddr,
frame_length);
len = frame_length;
}
/* Reset buffer descriptor as empty */
if ((info->rxIdx) == (PKTBUFSRX - 1))
prbd->cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
else
prbd->cbd_sc = BD_ENET_RX_EMPTY;
prbd->cbd_datlen = PKTSIZE_ALIGN;
/* Now, we have an empty RxBD, restart the DMA receive task */
MCD_continDma(info->rxTask);
/* Increment BD count */
info->rxIdx = (info->rxIdx + 1) % PKTBUFSRX;
}
return len;
}
static void fec_set_hwaddr(volatile fecdma_t * fecp, u8 * mac)
{
u8 currByte; /* byte for which to compute the CRC */
int byte; /* loop - counter */
int bit; /* loop - counter */
u32 crc = 0xffffffff; /* initial value */
for (byte = 0; byte < 6; byte++) {
currByte = mac[byte];
for (bit = 0; bit < 8; bit++) {
if ((currByte & 0x01) ^ (crc & 0x01)) {
crc >>= 1;
crc = crc ^ 0xedb88320;
} else {
crc >>= 1;
}
currByte >>= 1;
}
}
crc = crc >> 26;
/* Set individual hash table register */
if (crc >= 32) {
fecp->ialr = (1 << (crc - 32));
fecp->iaur = 0;
} else {
fecp->ialr = 0;
fecp->iaur = (1 << crc);
}
/* Set physical address */
fecp->palr = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
fecp->paur = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
/* Clear multicast address hash table */
fecp->gaur = 0;
fecp->galr = 0;
}
static int fec_init(struct eth_device *dev, bd_t * bd)
{
struct fec_info_dma *info = dev->priv;
volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
int i;
uchar enetaddr[6];
#ifdef ET_DEBUG
printf("fec_init: iobase 0x%08x ...\n", info->iobase);
#endif
fecpin_setclear(dev, 1);
fec_halt(dev);
#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
defined (CONFIG_SYS_DISCOVER_PHY)
mii_init();
set_fec_duplex_speed(fecp, bd, info->dup_spd);
#else
#ifndef CONFIG_SYS_DISCOVER_PHY
set_fec_duplex_speed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */
#endif /* CONFIG_CMD_MII || CONFIG_MII */
/* We use strictly polling mode only */
fecp->eimr = 0;
/* Clear any pending interrupt */
fecp->eir = 0xffffffff;
/* Set station address */
if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE)
eth_env_get_enetaddr("ethaddr", enetaddr);
else
eth_env_get_enetaddr("eth1addr", enetaddr);
fec_set_hwaddr(fecp, enetaddr);
/* Set Opcode/Pause Duration Register */
fecp->opd = 0x00010020;
/* Setup Buffers and Buffer Descriptors */
info->rxIdx = 0;
info->txIdx = 0;
/* Setup Receiver Buffer Descriptors (13.14.24.18)
* Settings: Empty, Wrap */
for (i = 0; i < PKTBUFSRX; i++) {
info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
info->rxbd[i].cbd_datlen = PKTSIZE_ALIGN;
info->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
}
info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
/* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
* Settings: Last, Tx CRC */
for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) {
info->txbd[i].cbd_sc = 0;
info->txbd[i].cbd_datlen = 0;
info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
}
info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
info->usedTbdIdx = 0;
info->cleanTbdNum = CONFIG_SYS_TX_ETH_BUFFER;
/* Set Rx FIFO alarm and granularity value */
fecp->rfcr = 0x0c000000;
fecp->rfar = 0x0000030c;
/* Set Tx FIFO granularity value */
fecp->tfcr = FIFO_CTRL_FRAME | FIFO_CTRL_GR(6) | 0x00040000;
fecp->tfar = 0x00000080;
fecp->tfwr = 0x2;
fecp->ctcwr = 0x03000000;
/* Enable DMA receive task */
MCD_startDma(info->rxTask, /* Dma channel */
(s8 *) info->rxbd, /*Source Address */
0, /* Source increment */
(s8 *) (&fecp->rfdr), /* dest */
4, /* dest increment */
0, /* DMA size */
4, /* xfer size */
info->rxInit, /* initiator */
info->rxPri, /* priority */
(MCD_FECRX_DMA | MCD_TT_FLAGS_DEF), /* Flags */
(MCD_NO_CSUM | MCD_NO_BYTE_SWAP) /* Function description */
);
/* Enable DMA tx task with no ready buffer descriptors */
MCD_startDma(info->txTask, /* Dma channel */
(s8 *) info->txbd, /*Source Address */
0, /* Source increment */
(s8 *) (&fecp->tfdr), /* dest */
4, /* dest incr */
0, /* DMA size */
4, /* xfer size */
info->txInit, /* initiator */
info->txPri, /* priority */
(MCD_FECTX_DMA | MCD_TT_FLAGS_DEF), /* Flags */
(MCD_NO_CSUM | MCD_NO_BYTE_SWAP) /* Function description */
);
/* Now enable the transmit and receive processing */
fecp->ecr |= FEC_ECR_ETHER_EN;
return 1;
}
static void fec_halt(struct eth_device *dev)
{
struct fec_info_dma *info = dev->priv;
volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
int counter = 0xffff;
/* issue graceful stop command to the FEC transmitter if necessary */
fecp->tcr |= FEC_TCR_GTS;
/* wait for graceful stop to register */
while ((counter--) && (!(fecp->eir & FEC_EIR_GRA))) ;
/* Disable DMA tasks */
MCD_killDma(info->txTask);
MCD_killDma(info->rxTask);
/* Disable the Ethernet Controller */
fecp->ecr &= ~FEC_ECR_ETHER_EN;
/* Clear FIFO status registers */
fecp->rfsr &= FIFO_ERRSTAT;
fecp->tfsr &= FIFO_ERRSTAT;
fecp->frst = 0x01000000;
/* Issue a reset command to the FEC chip */
fecp->ecr |= FEC_ECR_RESET;
/* wait at least 20 clock cycles */
udelay(10000);
#ifdef ET_DEBUG
printf("Ethernet task stopped\n");
#endif
}
int mcdmafec_initialize(bd_t * bis)
{
struct eth_device *dev;
int i;
#ifdef CONFIG_SYS_DMA_USE_INTSRAM
u32 tmp = CONFIG_SYS_INTSRAM + 0x2000;
#endif
for (i = 0; i < ARRAY_SIZE(fec_info); i++) {
dev =
(struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
sizeof *dev);
if (dev == NULL)
hang();
memset(dev, 0, sizeof(*dev));
sprintf(dev->name, "FEC%d", fec_info[i].index);
dev->priv = &fec_info[i];
dev->init = fec_init;
dev->halt = fec_halt;
dev->send = fec_send;
dev->recv = fec_recv;
/* setup Receive and Transmit buffer descriptor */
#ifdef CONFIG_SYS_DMA_USE_INTSRAM
fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
tmp = (u32)fec_info[i].rxbd;
fec_info[i].txbd =
(cbd_t *)((u32)fec_info[i].txbd + tmp +
(PKTBUFSRX * sizeof(cbd_t)));
tmp = (u32)fec_info[i].txbd;
fec_info[i].txbuf =
(char *)((u32)fec_info[i].txbuf + tmp +
(CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
tmp = (u32)fec_info[i].txbuf;
#else
fec_info[i].rxbd =
(cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
(PKTBUFSRX * sizeof(cbd_t)));
fec_info[i].txbd =
(cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
(CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
fec_info[i].txbuf =
(char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
#endif
#ifdef ET_DEBUG
printf("rxbd %x txbd %x\n",
(int)fec_info[i].rxbd, (int)fec_info[i].txbd);
#endif
fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
eth_register(dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
int retval;
struct mii_dev *mdiodev = mdio_alloc();
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
mdiodev->read = mcffec_miiphy_read;
mdiodev->write = mcffec_miiphy_write;
retval = mdio_register(mdiodev);
if (retval < 0)
return retval;
#endif
if (i > 0)
fec_info[i - 1].next = &fec_info[i];
}
fec_info[i - 1].next = &fec_info[0];
/* default speed */
bis->bi_ethspeed = 10;
return 0;
}