upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/power/pfuze3000_pmic.h

82 lines
1.9 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015 Freescale Semiconductor, Inc
* Peng Fan <Peng.Fan@freescale.com>
*/
#ifndef __PFUZE3000_PMIC_H_
#define __PFUZE3000_PMIC_H_
/* PFUZE3000 registers */
enum {
PFUZE3000_DEVICEID = 0x00,
PFUZE3000_REVID = 0x03,
PFUZE3000_FABID = 0x04,
PFUZE3000_INTSTAT0 = 0x05,
PFUZE3000_INTMASK0 = 0x06,
PFUZE3000_INTSENSE0 = 0x07,
PFUZE3000_INTSTAT1 = 0x08,
PFUZE3000_INTMASK1 = 0x09,
PFUZE3000_INTSENSE1 = 0x0A,
PFUZE3000_INTSTAT3 = 0x0E,
PFUZE3000_INTMASK3 = 0x0F,
PFUZE3000_INTSENSE3 = 0x10,
PFUZE3000_INTSTAT4 = 0x11,
PFUZE3000_INTMASK4 = 0x12,
PFUZE3000_INTSENSE4 = 0x13,
PFUZE3000_COINCTL = 0x1A,
PFUZE3000_PWRCTL = 0x1B,
PFUZE3000_MEMA = 0x1C,
PFUZE3000_MEMB = 0x1D,
PFUZE3000_MEMC = 0x1E,
PFUZE3000_MEMD = 0x1F,
PFUZE3000_SW1AVOLT = 0x20,
PFUZE3000_SW1ASTBY = 0x21,
PFUZE3000_SW1AOFF = 0x22,
PFUZE3000_SW1AMODE = 0x23,
PFUZE3000_SW1ACONF = 0x24,
PFUZE3000_SW1BVOLT = 0x2E,
PFUZE3000_SW1BSTBY = 0x2F,
PFUZE3000_SW1BOFF = 0x30,
PFUZE3000_SW1BMODE = 0x31,
PFUZE3000_SW1BCONF = 0x32,
PFUZE3000_SW2VOLT = 0x35,
PFUZE3000_SW2STBY = 0x36,
PFUZE3000_SW2OFF = 0x37,
PFUZE3000_SW2MODE = 0x38,
PFUZE3000_SW2CONF = 0x39,
PFUZE3000_SW3VOLT = 0x3C,
PFUZE3000_SW3STBY = 0x3D,
PFUZE3000_SW3OFF = 0x3E,
PFUZE3000_SW3MODE = 0x3F,
PFUZE3000_SW3CONF = 0x40,
PFUZE3000_SWBSTCTL = 0x66,
PFUZE3000_LDOGCTL = 0x69,
PFUZE3000_VREFDDRCTL = 0x6A,
PFUZE3000_VSNVSCTL = 0x6B,
PFUZE3000_VLDO1CTL = 0x6C,
PFUZE3000_VLDO2CTL = 0x6D,
PFUZE3000_VCC_SDCTL = 0x6E,
PFUZE3000_V33CTL = 0x6F,
PFUZE3000_VLDO3CTL = 0x70,
PFUZE3000_VLD4CTL = 0x71,
PFUZE3000_NUM_OF_REGS = 0x100,
};
int power_pfuze3000_init(unsigned char bus);
/* Voltage Configuration */
#define PFUZE3000_SW1AB_SETP(x) ((x - 7000) / 250)
#define PFUZE3000_SW3_SETP(x) ((x - 9000) / 500)
#define PFUZE3000_VLDO_SETP(x) ((x - 8000) / 500)
#endif