upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/scripts/kconfig/Makefile

322 lines
12 KiB

# SPDX-License-Identifier: GPL-2.0
# ===========================================================================
# Kernel configuration targets
# These targets are used from top-level makefile
PHONY += xconfig gconfig menuconfig config syncconfig update-po-config \
localmodconfig localyesconfig
# Added for U-Boot
# Linux has defconfig files in arch/$(SRCARCH)/configs/,
# on the other hand, U-Boot does in configs/.
# Set SRCARCH to .. fake this Makefile.
SRCARCH := ..
ifdef KBUILD_KCONFIG
Kconfig := $(KBUILD_KCONFIG)
else
Kconfig := Kconfig
endif
ifeq ($(quiet),silent_)
silent := -s
endif
# We need this, in case the user has it in its environment
unexport CONFIG_
xconfig: $(obj)/qconf
$< $(silent) $(Kconfig)
gconfig: $(obj)/gconf
$< $(silent) $(Kconfig)
menuconfig: $(obj)/mconf
$< $(silent) $(Kconfig)
config: $(obj)/conf
$< $(silent) --oldaskconfig $(Kconfig)
nconfig: $(obj)/nconf
$< $(silent) $(Kconfig)
# This has become an internal implementation detail and is now deprecated
# for external use.
syncconfig: $(obj)/conf
$(Q)mkdir -p include/config include/generated
$< $(silent) --$@ $(Kconfig)
localyesconfig localmodconfig: $(obj)/conf
$(Q)mkdir -p include/config include/generated
$(Q)perl $(srctree)/$(src)/streamline_config.pl --$@ $(srctree) $(Kconfig) > .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
(mv -f .config .config.old.1; \
mv -f .tmp.config .config; \
$< $(silent) --oldconfig $(Kconfig); \
mv -f .config.old.1 .config.old) \
else \
mv -f .tmp.config .config; \
$< $(silent) --oldconfig $(Kconfig); \
fi
$(Q)rm -f .tmp.config
# Create new linux.pot file
# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
$(Q)$(kecho) " GEN config.pot"
$(Q)xgettext --default-domain=linux \
--add-comments --keyword=_ --keyword=N_ \
--from-code=UTF-8 \
--files-from=$(srctree)/scripts/kconfig/POTFILES.in \
--directory=$(srctree) --directory=$(objtree) \
--output $(obj)/config.pot
$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
$(Q)(for i in `ls $(srctree)/arch/*/Kconfig \
$(srctree)/arch/*/um/Kconfig`; \
do \
$(kecho) " GEN $$i"; \
$(obj)/kxgettext $$i \
>> $(obj)/config.pot; \
done )
$(Q)$(kecho) " GEN linux.pot"
$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
--output $(obj)/linux.pot
$(Q)rm -f $(obj)/config.pot
# These targets map 1:1 to the commandline options of 'conf'
simple-targets := oldconfig allnoconfig allyesconfig allmodconfig \
alldefconfig randconfig listnewconfig olddefconfig
PHONY += $(simple-targets)
$(simple-targets): $(obj)/conf
$< $(silent) --$@ $(Kconfig)
PHONY += oldnoconfig silentoldconfig savedefconfig defconfig
# oldnoconfig is an alias of olddefconfig, because people already are dependent
# on its behavior (sets new symbols to their default value but not 'n') with the
# counter-intuitive name.
oldnoconfig: olddefconfig
@echo " WARNING: \"oldnoconfig\" target will be removed after Linux 4.19"
@echo " Please use \"olddefconfig\" instead, which is an alias."
# We do not expect manual invokcation of "silentoldcofig" (or "syncconfig").
silentoldconfig: syncconfig
@echo " WARNING: \"silentoldconfig\" has been renamed to \"syncconfig\""
@echo " and is now an internal implementation detail."
@echo " What you want is probably \"oldconfig\"."
@echo " \"silentoldconfig\" will be removed after Linux 4.19"
savedefconfig: $(obj)/conf
$< $(silent) --$@=defconfig $(Kconfig)
defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
$< $(silent) --defconfig $(Kconfig)
else
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)),)
@$(kecho) "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
$(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
else
@$(kecho) "*** Default configuration is based on target '$(KBUILD_DEFCONFIG)'"
$(Q)$(MAKE) -f $(srctree)/Makefile $(KBUILD_DEFCONFIG)
endif
endif
%_defconfig: $(obj)/conf
$(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
# Added for U-Boot (backward compatibility)
%_config: %_defconfig
@:
configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/configs/$@)
%.config: $(obj)/conf
$(if $(call configfiles),, $(error No configuration exists for this target on this architecture))
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m .config $(configfiles)
+$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
PHONY += kvmconfig
kvmconfig: kvm_guest.config
@:
PHONY += xenconfig
xenconfig: xen.config
@:
PHONY += tinyconfig
tinyconfig:
$(Q)$(MAKE) -f $(srctree)/Makefile allnoconfig tiny.config
# CHECK: -o cache_dir=<path> working?
PHONY += testconfig
testconfig: $(obj)/conf
$(PYTHON3) -B -m pytest $(srctree)/$(src)/tests \
-o cache_dir=$(abspath $(obj)/tests/.cache) \
$(if $(findstring 1,$(KBUILD_VERBOSE)),--capture=no)
clean-dirs += tests/.cache
# Help text used by make help
help:
@echo ' config - Update current config utilising a line-oriented program'
@echo ' nconfig - Update current config utilising a ncurses menu based'
@echo ' program'
@echo ' menuconfig - Update current config utilising a menu based program'
@echo ' xconfig - Update current config utilising a Qt based front-end'
@echo ' gconfig - Update current config utilising a GTK+ based front-end'
@echo ' oldconfig - Update current config utilising a provided .config as base'
@echo ' localmodconfig - Update current config disabling modules not loaded'
@echo ' localyesconfig - Update current config converting local mods to core'
@echo ' defconfig - New config with default from ARCH supplied defconfig'
@echo ' savedefconfig - Save current config as ./defconfig (minimal config)'
@echo ' allnoconfig - New config where all options are answered with no'
@echo ' allyesconfig - New config where all options are accepted with yes'
@echo ' allmodconfig - New config selecting modules when possible'
@echo ' alldefconfig - New config with all symbols set to default'
@echo ' randconfig - New config with random answer to all options'
@echo ' listnewconfig - List new options'
@echo ' olddefconfig - Same as oldconfig but sets new symbols to their'
@echo ' default value without prompting'
# @echo ' kvmconfig - Enable additional options for kvm guest kernel support'
# @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support'
# @echo ' tinyconfig - Configure the tiniest possible kernel'
# lxdialog stuff
check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
# Use recursively expanded variables so we do not call gcc unless
# we really need to do so. (Do not call gcc as part of make mrproper)
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-DLOCALE
# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf: Used for defconfig, oldconfig and related targets
# nconf: Used for the nconfig target.
# Utilizes ncurses
# mconf: Used for the menuconfig target
# Utilizes the lxdialog package
# qconf: Used for the xconfig target
# Based on Qt which needs to be installed to compile it
# gconf: Used for the gconfig target
# Based on GTK+ which needs to be installed to compile it
# object files used by all kconfig flavours
lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
conf-objs := conf.o zconf.tab.o
mconf-objs := mconf.o zconf.tab.o $(lxdialog)
nconf-objs := nconf.o zconf.tab.o nconf.gui.o
kxgettext-objs := kxgettext.o zconf.tab.o
qconf-cxxobjs := qconf.o
qconf-objs := zconf.tab.o
gconf-objs := gconf.o zconf.tab.o
hostprogs-y := conf nconf mconf kxgettext qconf gconf
targets += zconf.lex.c
clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
clean-files += gconf.glade.h
clean-files += config.pot linux.pot
# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
PHONY += $(obj)/dochecklxdialog
$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/dochecklxdialog
$(obj)/dochecklxdialog:
$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)
always := dochecklxdialog
# Add environment specific flags
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
HOST_EXTRACXXFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCXX) $(HOSTCXXFLAGS))
# generated files seem to need this to find local include files
HOSTCFLAGS_zconf.lex.o := -I$(src)
HOSTCFLAGS_zconf.tab.o := -I$(src)
HOSTLOADLIBES_qconf = $(KC_QT_LIBS)
HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS)
HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
-Wno-missing-prototypes
HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOSTLOADLIBES_nconf = $(shell \
pkg-config --libs menuw panelw ncursesw 2>/dev/null \
|| pkg-config --libs menu panel ncurses 2>/dev/null \
|| echo "-lmenu -lpanel -lncurses" )
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
ifeq ($(MAKECMDGOALS),xconfig)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck
# Qt needs some extra effort...
$(obj)/.tmp_qtcheck:
@set -e; $(kecho) " CHECK qt"; \
if pkg-config --exists Qt5Core; then \
cflags="-std=c++11 -fPIC `pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets`"; \
libs=`pkg-config --libs Qt5Core Qt5Gui Qt5Widgets`; \
moc=`pkg-config --variable=host_bins Qt5Core`/moc; \
elif pkg-config --exists QtCore; then \
cflags=`pkg-config --cflags QtCore QtGui`; \
libs=`pkg-config --libs QtCore QtGui`; \
moc=`pkg-config --variable=moc_location QtCore`; \
else \
echo >&2 "*"; \
echo >&2 "* Could not find Qt via pkg-config."; \
echo >&2 "* Please install either Qt 4.8 or 5.x. and make sure it's in PKG_CONFIG_PATH"; \
echo >&2 "*"; \
exit 1; \
fi; \
echo "KC_QT_CFLAGS=$$cflags" > $@; \
echo "KC_QT_LIBS=$$libs" >> $@; \
echo "KC_QT_MOC=$$moc" >> $@
endif
$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
ifeq ($(MAKECMDGOALS),gconfig)
-include $(obj)/.tmp_gtkcheck
# GTK+ needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
touch $@; \
else \
echo >&2 "*"; \
echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \
echo >&2 "*"; \
false; \
fi \
else \
echo >&2 "*"; \
echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \
echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \
echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
echo >&2 "*"; \
false; \
fi
endif
$(obj)/zconf.tab.o: $(obj)/zconf.lex.c
$(obj)/qconf.o: $(obj)/qconf.moc
quiet_cmd_moc = MOC $@
cmd_moc = $(KC_QT_MOC) -i $< -o $@
$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck
$(call cmd,moc)
# Extract gconf menu items for i18n support
$(obj)/gconf.glade.h: $(obj)/gconf.glade
$(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \
$(obj)/gconf.glade