upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/sound/max98095.c

550 lines
13 KiB

/*
* max98095.c -- MAX98095 ALSA SoC Audio driver
*
* Copyright 2011 Maxim Integrated Products
*
* Modified for uboot by R. Chandrasekar (rcsekar@samsung.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/power.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <common.h>
#include <div64.h>
#include <fdtdec.h>
#include <i2c.h>
#include <sound.h>
#include "i2s.h"
#include "max98095.h"
enum max98095_type {
MAX98095,
};
struct max98095_priv {
enum max98095_type devtype;
unsigned int sysclk;
unsigned int rate;
unsigned int fmt;
};
static struct sound_codec_info g_codec_info;
struct max98095_priv g_max98095_info;
unsigned int g_max98095_i2c_dev_addr;
/* Index 0 is reserved. */
int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
88200, 96000};
/*
* Writes value to a device register through i2c
*
* @param reg reg number to be write
* @param data data to be writen to the above registor
*
* @return int value 1 for change, 0 for no change or negative error code.
*/
static int max98095_i2c_write(unsigned int reg, unsigned char data)
{
debug("%s: Write Addr : 0x%02X, Data : 0x%02X\n",
__func__, reg, data);
return i2c_write(g_max98095_i2c_dev_addr, reg, 1, &data, 1);
}
/*
* Read a value from a device register through i2c
*
* @param reg reg number to be read
* @param data address of read data to be stored
*
* @return int value 0 for success, -1 in case of error.
*/
static unsigned int max98095_i2c_read(unsigned int reg, unsigned char *data)
{
int ret;
ret = i2c_read(g_max98095_i2c_dev_addr, reg, 1, data, 1);
if (ret != 0) {
debug("%s: Error while reading register %#04x\n",
__func__, reg);
return -1;
}
return 0;
}
/*
* update device register bits through i2c
*
* @param reg codec register
* @param mask register mask
* @param value new value
*
* @return int value 0 for success, non-zero error code.
*/
static int max98095_update_bits(unsigned int reg, unsigned char mask,
unsigned char value)
{
int change, ret = 0;
unsigned char old, new;
if (max98095_i2c_read(reg, &old) != 0)
return -1;
new = (old & ~mask) | (value & mask);
change = (old != new) ? 1 : 0;
if (change)
ret = max98095_i2c_write(reg, new);
if (ret < 0)
return ret;
return change;
}
/*
* codec mclk clock divider coefficients based on sampling rate
*
* @param rate sampling rate
* @param value address of indexvalue to be stored
*
* @return 0 for success or negative error code.
*/
static int rate_value(int rate, u8 *value)
{
int i;
for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
if (rate_table[i] >= rate) {
*value = i;
return 0;
}
}
*value = 1;
return -1;
}
/*
* Sets hw params for max98095
*
* @param max98095 max98095 information pointer
* @param rate Sampling rate
* @param bits_per_sample Bits per sample
*
* @return -1 for error and 0 Success.
*/
static int max98095_hw_params(struct max98095_priv *max98095,
unsigned int rate, unsigned int bits_per_sample)
{
u8 regval;
int error;
switch (bits_per_sample) {
case 16:
error = max98095_update_bits(M98095_034_DAI2_FORMAT,
M98095_DAI_WS, 0);
break;
case 24:
error = max98095_update_bits(M98095_034_DAI2_FORMAT,
M98095_DAI_WS, M98095_DAI_WS);
break;
default:
debug("%s: Illegal bits per sample %d.\n",
__func__, bits_per_sample);
return -1;
}
if (rate_value(rate, &regval)) {
debug("%s: Failed to set sample rate to %d.\n",
__func__, rate);
return -1;
}
max98095->rate = rate;
error |= max98095_update_bits(M98095_031_DAI2_CLKMODE,
M98095_CLKMODE_MASK, regval);
/* Update sample rate mode */
if (rate < 50000)
error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
M98095_DAI_DHF, 0);
else
error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
M98095_DAI_DHF, M98095_DAI_DHF);
if (error < 0) {
debug("%s: Error setting hardware params.\n", __func__);
return -1;
}
return 0;
}
/*
* Configures Audio interface system clock for the given frequency
*
* @param max98095 max98095 information
* @param freq Sampling frequency in Hz
*
* @return -1 for error and 0 success.
*/
static int max98095_set_sysclk(struct max98095_priv *max98095,
unsigned int freq)
{
int error = 0;
/* Requested clock frequency is already setup */
if (freq == max98095->sysclk)
return 0;
/* Setup clocks for slave mode, and using the PLL
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
* 0x02 (when master clk is 20MHz to 40MHz)..
* 0x03 (when master clk is 40MHz to 60MHz)..
*/
if ((freq >= 10000000) && (freq < 20000000)) {
error = max98095_i2c_write(M98095_026_SYS_CLK, 0x10);
} else if ((freq >= 20000000) && (freq < 40000000)) {
error = max98095_i2c_write(M98095_026_SYS_CLK, 0x20);
} else if ((freq >= 40000000) && (freq < 60000000)) {
error = max98095_i2c_write(M98095_026_SYS_CLK, 0x30);
} else {
debug("%s: Invalid master clock frequency\n", __func__);
return -1;
}
debug("%s: Clock at %uHz\n", __func__, freq);
if (error < 0)
return -1;
max98095->sysclk = freq;
return 0;
}
/*
* Sets Max98095 I2S format
*
* @param max98095 max98095 information
* @param fmt i2S format - supports a subset of the options defined
* in i2s.h.
*
* @return -1 for error and 0 Success.
*/
static int max98095_set_fmt(struct max98095_priv *max98095, int fmt)
{
u8 regval = 0;
int error = 0;
if (fmt == max98095->fmt)
return 0;
max98095->fmt = fmt;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
/* Slave mode PLL */
error |= max98095_i2c_write(M98095_032_DAI2_CLKCFG_HI,
0x80);
error |= max98095_i2c_write(M98095_033_DAI2_CLKCFG_LO,
0x00);
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* Set to master mode */
regval |= M98095_DAI_MAS;
break;
case SND_SOC_DAIFMT_CBS_CFM:
case SND_SOC_DAIFMT_CBM_CFS:
default:
debug("%s: Clock mode unsupported\n", __func__);
return -1;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
regval |= M98095_DAI_DLY;
break;
case SND_SOC_DAIFMT_LEFT_J:
break;
default:
debug("%s: Unrecognized format.\n", __func__);
return -1;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_NB_IF:
regval |= M98095_DAI_WCI;
break;
case SND_SOC_DAIFMT_IB_NF:
regval |= M98095_DAI_BCI;
break;
case SND_SOC_DAIFMT_IB_IF:
regval |= M98095_DAI_BCI | M98095_DAI_WCI;
break;
default:
debug("%s: Unrecognized inversion settings.\n", __func__);
return -1;
}
error |= max98095_update_bits(M98095_034_DAI2_FORMAT,
M98095_DAI_MAS | M98095_DAI_DLY | M98095_DAI_BCI |
M98095_DAI_WCI, regval);
error |= max98095_i2c_write(M98095_035_DAI2_CLOCK,
M98095_DAI_BSEL64);
if (error < 0) {
debug("%s: Error setting i2s format.\n", __func__);
return -1;
}
return 0;
}
/*
* resets the audio codec
*
* @return -1 for error and 0 success.
*/
static int max98095_reset(void)
{
int i, ret;
/*
* Gracefully reset the DSP core and the codec hardware in a proper
* sequence.
*/
ret = max98095_i2c_write(M98095_00F_HOST_CFG, 0);
if (ret != 0) {
debug("%s: Failed to reset DSP: %d\n", __func__, ret);
return ret;
}
ret = max98095_i2c_write(M98095_097_PWR_SYS, 0);
if (ret != 0) {
debug("%s: Failed to reset codec: %d\n", __func__, ret);
return ret;
}
/*
* Reset to hardware default for registers, as there is not a soft
* reset hardware control register.
*/
for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
ret = max98095_i2c_write(i, 0);
if (ret < 0) {
debug("%s: Failed to reset: %d\n", __func__, ret);
return ret;
}
}
return 0;
}
/*
* Intialise max98095 codec device
*
* @param max98095 max98095 information
*
* @returns -1 for error and 0 Success.
*/
static int max98095_device_init(struct max98095_priv *max98095)
{
unsigned char id;
int error = 0;
/* reset the codec, the DSP core, and disable all interrupts */
error = max98095_reset();
if (error != 0) {
debug("Reset\n");
return error;
}
/* initialize private data */
max98095->sysclk = -1U;
max98095->rate = -1U;
max98095->fmt = -1U;
error = max98095_i2c_read(M98095_0FF_REV_ID, &id);
if (error < 0) {
debug("%s: Failure reading hardware revision: %d\n",
__func__, id);
goto err_access;
}
debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
error |= max98095_i2c_write(M98095_097_PWR_SYS, M98095_PWRSV);
/*
* initialize registers to hardware default configuring audio
* interface2 to DAC
*/
error |= max98095_i2c_write(M98095_048_MIX_DAC_LR,
M98095_DAI2M_TO_DACL|M98095_DAI2M_TO_DACR);
error |= max98095_i2c_write(M98095_092_PWR_EN_OUT,
M98095_SPK_SPREADSPECTRUM);
error |= max98095_i2c_write(M98095_045_CFG_DSP, M98095_DSPNORMAL);
error |= max98095_i2c_write(M98095_04E_CFG_HP, M98095_HPNORMAL);
error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG,
M98095_S1NORMAL|M98095_SDATA);
error |= max98095_i2c_write(M98095_036_DAI2_IOCFG,
M98095_S2NORMAL|M98095_SDATA);
error |= max98095_i2c_write(M98095_040_DAI3_IOCFG,
M98095_S3NORMAL|M98095_SDATA);
/* take the codec out of the shut down */
error |= max98095_update_bits(M98095_097_PWR_SYS, M98095_SHDNRUN,
M98095_SHDNRUN);
/* route DACL and DACR output to HO and Spekers */
error |= max98095_i2c_write(M98095_050_MIX_SPK_LEFT, 0x01); /* DACL */
error |= max98095_i2c_write(M98095_051_MIX_SPK_RIGHT, 0x01);/* DACR */
error |= max98095_i2c_write(M98095_04C_MIX_HP_LEFT, 0x01); /* DACL */
error |= max98095_i2c_write(M98095_04D_MIX_HP_RIGHT, 0x01); /* DACR */
/* power Enable */
error |= max98095_i2c_write(M98095_091_PWR_EN_OUT, 0xF3);
/* set Volume */
error |= max98095_i2c_write(M98095_064_LVL_HP_L, 15);
error |= max98095_i2c_write(M98095_065_LVL_HP_R, 15);
error |= max98095_i2c_write(M98095_067_LVL_SPK_L, 16);
error |= max98095_i2c_write(M98095_068_LVL_SPK_R, 16);
/* Enable DAIs */
error |= max98095_i2c_write(M98095_093_BIAS_CTRL, 0x30);
error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07);
err_access:
if (error < 0)
return -1;
return 0;
}
static int max98095_do_init(struct sound_codec_info *pcodec_info,
int sampling_rate, int mclk_freq,
int bits_per_sample)
{
int ret = 0;
/* Enable codec clock */
set_xclkout();
/* shift the device address by 1 for 7 bit addressing */
g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1;
if (pcodec_info->codec_type == CODEC_MAX_98095)
g_max98095_info.devtype = MAX98095;
else {
debug("%s: Codec id [%d] not defined\n", __func__,
pcodec_info->codec_type);
return -1;
}
ret = max98095_device_init(&g_max98095_info);
if (ret < 0) {
debug("%s: max98095 codec chip init failed\n", __func__);
return ret;
}
ret = max98095_set_sysclk(&g_max98095_info, mclk_freq);
if (ret < 0) {
debug("%s: max98095 codec set sys clock failed\n", __func__);
return ret;
}
ret = max98095_hw_params(&g_max98095_info, sampling_rate,
bits_per_sample);
if (ret == 0) {
ret = max98095_set_fmt(&g_max98095_info,
SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS);
}
return ret;
}
static int get_max98095_codec_values(struct sound_codec_info *pcodec_info,
const void *blob)
{
int error = 0;
#ifdef CONFIG_OF_CONTROL
enum fdt_compat_id compat;
int node;
int parent;
/* Get the node from FDT for codec */
node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC);
if (node <= 0) {
debug("EXYNOS_SOUND: No node for codec in device tree\n");
debug("node = %d\n", node);
return -1;
}
parent = fdt_parent_offset(blob, node);
if (parent < 0) {
debug("%s: Cannot find node parent\n", __func__);
return -1;
}
compat = fdtdec_lookup(blob, parent);
switch (compat) {
case COMPAT_SAMSUNG_S3C2440_I2C:
pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
error |= pcodec_info->i2c_bus;
debug("i2c bus = %d\n", pcodec_info->i2c_bus);
pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
"reg", 0);
error |= pcodec_info->i2c_dev_addr;
debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr);
break;
default:
debug("%s: Unknown compat id %d\n", __func__, compat);
return -1;
}
#else
pcodec_info->i2c_bus = AUDIO_I2C_BUS;
pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
#endif
pcodec_info->codec_type = CODEC_MAX_98095;
if (error == -1) {
debug("fail to get max98095 codec node properties\n");
return -1;
}
return 0;
}
/* max98095 Device Initialisation */
int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
int bits_per_sample)
{
int ret;
int old_bus = i2c_get_bus_num();
struct sound_codec_info *pcodec_info = &g_codec_info;
if (get_max98095_codec_values(pcodec_info, blob) < 0) {
debug("FDT Codec values failed\n");
return -1;
}
i2c_set_bus_num(pcodec_info->i2c_bus);
ret = max98095_do_init(pcodec_info, sampling_rate, mclk_freq,
bits_per_sample);
i2c_set_bus_num(old_bus);
return ret;
}