upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h

148 lines
5.0 KiB

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) Marvell International Ltd. and its affiliates
*/
#ifndef _DDR_ML_WRAPPER_H
#define _DDR_ML_WRAPPER_H
#include <common.h>
#include <i2c.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
#define INTER_REGS_BASE SOC_REGS_PHY_BASE
#endif
/*
* MV_DEBUG_INIT need to be defines, otherwise the output of the
* DDR2 training code is not complete and misleading
*/
#define MV_DEBUG_INIT
#ifdef MV_DEBUG_INIT
#define DEBUG_INIT_S(s) puts(s)
#define DEBUG_INIT_D(d, l) printf("%x", d)
#define DEBUG_INIT_D_10(d, l) printf("%d", d)
#else
#define DEBUG_INIT_S(s)
#define DEBUG_INIT_D(d, l)
#define DEBUG_INIT_D_10(d, l)
#endif
#ifdef MV_DEBUG_INIT_FULL
#define DEBUG_INIT_FULL_S(s) puts(s)
#define DEBUG_INIT_FULL_D(d, l) printf("%x", d)
#define DEBUG_INIT_FULL_D_10(d, l) printf("%d", d)
#define DEBUG_WR_REG(reg, val) \
{ DEBUG_INIT_S("Write Reg: 0x"); DEBUG_INIT_D((reg), 8); \
DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); }
#define DEBUG_RD_REG(reg, val) \
{ DEBUG_INIT_S("Read Reg: 0x"); DEBUG_INIT_D((reg), 8); \
DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); }
#else
#define DEBUG_INIT_FULL_S(s)
#define DEBUG_INIT_FULL_D(d, l)
#define DEBUG_INIT_FULL_D_10(d, l)
#define DEBUG_WR_REG(reg, val)
#define DEBUG_RD_REG(reg, val)
#endif
#define DEBUG_INIT_FULL_C(s, d, l) \
{ DEBUG_INIT_FULL_S(s); \
DEBUG_INIT_FULL_D(d, l); \
DEBUG_INIT_FULL_S("\n"); }
#define DEBUG_INIT_C(s, d, l) \
{ DEBUG_INIT_S(s); DEBUG_INIT_D(d, l); DEBUG_INIT_S("\n"); }
/*
* Debug (Enable/Disable modules) and Error report
*/
#ifdef BASIC_DEBUG
#define MV_DEBUG_WL
#define MV_DEBUG_RL
#define MV_DEBUG_DQS_RESULTS
#endif
#ifdef FULL_DEBUG
#define MV_DEBUG_WL
#define MV_DEBUG_RL
#define MV_DEBUG_DQS
#define MV_DEBUG_PBS
#define MV_DEBUG_DFS
#define MV_DEBUG_MAIN_FULL
#define MV_DEBUG_DFS_FULL
#define MV_DEBUG_DQS_FULL
#define MV_DEBUG_RL_FULL
#define MV_DEBUG_WL_FULL
#endif
/* The following is a list of Marvell status */
#define MV_ERROR (-1)
#define MV_OK (0x00) /* Operation succeeded */
#define MV_FAIL (0x01) /* Operation failed */
#define MV_BAD_VALUE (0x02) /* Illegal value (general) */
#define MV_OUT_OF_RANGE (0x03) /* The value is out of range */
#define MV_BAD_PARAM (0x04) /* Illegal parameter in function called */
#define MV_BAD_PTR (0x05) /* Illegal pointer value */
#define MV_BAD_SIZE (0x06) /* Illegal size */
#define MV_BAD_STATE (0x07) /* Illegal state of state machine */
#define MV_SET_ERROR (0x08) /* Set operation failed */
#define MV_GET_ERROR (0x09) /* Get operation failed */
#define MV_CREATE_ERROR (0x0a) /* Fail while creating an item */
#define MV_NOT_FOUND (0x0b) /* Item not found */
#define MV_NO_MORE (0x0c) /* No more items found */
#define MV_NO_SUCH (0x0d) /* No such item */
#define MV_TIMEOUT (0x0e) /* Time Out */
#define MV_NO_CHANGE (0x0f) /* Parameter(s) is already in this value */
#define MV_NOT_SUPPORTED (0x10) /* This request is not support */
#define MV_NOT_IMPLEMENTED (0x11) /* Request supported but not implemented*/
#define MV_NOT_INITIALIZED (0x12) /* The item is not initialized */
#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */
#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */
#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */
#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */
#define MV_HW_ERROR (0x17) /* Hardware error */
#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */
#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */
#define MV_NOT_READY (0x1a) /* The other side is not ready yet */
#define MV_ALREADY_EXIST (0x1b) /* Tried to create existing item */
#define MV_OUT_OF_CPU_MEM (0x1c) /* Cpu memory allocation failed. */
#define MV_NOT_STARTED (0x1d) /* Not started yet */
#define MV_BUSY (0x1e) /* Item is busy. */
#define MV_TERMINATE (0x1f) /* Item terminates it's work. */
#define MV_NOT_ALIGNED (0x20) /* Wrong alignment */
#define MV_NOT_ALLOWED (0x21) /* Operation NOT allowed */
#define MV_WRITE_PROTECT (0x22) /* Write protected */
#define MV_INVALID (int)(-1)
/*
* Accessor functions for the registers
*/
static inline void reg_write(u32 addr, u32 val)
{
writel(val, INTER_REGS_BASE + addr);
}
static inline u32 reg_read(u32 addr)
{
return readl(INTER_REGS_BASE + addr);
}
static inline void reg_bit_set(u32 addr, u32 mask)
{
setbits_le32(INTER_REGS_BASE + addr, mask);
}
static inline void reg_bit_clr(u32 addr, u32 mask)
{
clrbits_le32(INTER_REGS_BASE + addr, mask);
}
#endif /* _DDR_ML_WRAPPER_H */