upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
138 lines
4.3 KiB
138 lines
4.3 KiB
/*
|
|
* Copyright (c) 2006 Ben Warren, Qstreams Networks Inc.
|
|
* With help from the common/soft_spi and cpu/mpc8260 drivers
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <spi.h>
|
|
#include <asm/mpc8xxx_spi.h>
|
|
|
|
#ifdef CONFIG_HARD_SPI
|
|
|
|
#define SPI_EV_NE 0x80000000 >> 22 /* Receiver Not Empty */
|
|
#define SPI_EV_NF 0x80000000 >> 23 /* Transmitter Not Full */
|
|
|
|
#define SPI_MODE_LOOP 0x80000000 >> 1 /* Loopback mode */
|
|
#define SPI_MODE_REV 0x80000000 >> 5 /* Reverse mode - MSB first */
|
|
#define SPI_MODE_MS 0x80000000 >> 6 /* Always master */
|
|
#define SPI_MODE_EN 0x80000000 >> 7 /* Enable interface */
|
|
|
|
#define SPI_PRESCALER(reg, div) (reg)=((reg) & 0xfff0ffff) | ((div)<<16)
|
|
#define SPI_CHARLENGTH(reg, div) (reg)=((reg) & 0xff0fffff) | ((div)<<20)
|
|
|
|
#define SPI_TIMEOUT 1000
|
|
|
|
void spi_init(void)
|
|
{
|
|
volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
|
|
|
|
/* ------------------------------------------------
|
|
* SPI pins on the MPC83xx are not muxed, so all we do is initialize
|
|
* some registers
|
|
* ------------------------------------------------ */
|
|
spi->mode = SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN;
|
|
SPI_PRESCALER(spi->mode, 1); /* Use SYSCLK / 8 (16.67MHz typ.) */
|
|
spi->event = 0xffffffff; /* Clear all SPI events */
|
|
spi->mask = 0x00000000; /* Mask all SPI interrupts */
|
|
spi->com = 0; /* LST bit doesn't do anything, so disregard */
|
|
}
|
|
|
|
int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar * dout, uchar * din)
|
|
{
|
|
volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
|
|
unsigned int tmpdout, tmpdin, event;
|
|
int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0);
|
|
int tm, isRead = 0;
|
|
unsigned char charSize = 32;
|
|
|
|
debug("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
|
|
(int)chipsel, *(uint *) dout, *(uint *) din, bitlen);
|
|
|
|
if (chipsel != NULL)
|
|
(*chipsel) (1); /* select the target chip */
|
|
|
|
spi->event = 0xffffffff; /* Clear all SPI events */
|
|
|
|
/* handle data in 32-bit chunks */
|
|
while (numBlks--) {
|
|
tmpdout = 0;
|
|
charSize = (bitlen >= 32 ? 32 : bitlen);
|
|
|
|
/* Shift data so it's msb-justified */
|
|
tmpdout = *(u32 *) dout >> (32 - charSize);
|
|
|
|
/* The LEN field of the SPMODE register is set as follows:
|
|
*
|
|
* Bit length setting
|
|
* l <= 4 3
|
|
* 4 < l <= 16 l - 1
|
|
* l > 16 0
|
|
*/
|
|
|
|
if (bitlen <= 16)
|
|
SPI_CHARLENGTH(spi->mode, bitlen <= 4 ? 3 : bitlen - 1);
|
|
else {
|
|
SPI_CHARLENGTH(spi->mode, 0);
|
|
/* Set up the next iteration if sending > 32 bits */
|
|
bitlen -= 32;
|
|
dout += 4;
|
|
}
|
|
|
|
spi->tx = tmpdout; /* Write the data out */
|
|
debug("*** spi_xfer: ... %08x written\n", tmpdout);
|
|
|
|
/* --------------------------------
|
|
* Wait for SPI transmit to get out
|
|
* or time out (1 second = 1000 ms)
|
|
* The NE event must be read and cleared first
|
|
* -------------------------------- */
|
|
for (tm = 0, isRead = 0; tm < SPI_TIMEOUT; ++tm) {
|
|
event = spi->event;
|
|
if (event & SPI_EV_NE) {
|
|
tmpdin = spi->rx;
|
|
spi->event |= SPI_EV_NE;
|
|
isRead = 1;
|
|
|
|
*(u32 *) din = (tmpdin << (32 - charSize));
|
|
if (charSize == 32) {
|
|
/* Advance output buffer by 32 bits */
|
|
din += 4;
|
|
}
|
|
}
|
|
/* Only bail when we've had both NE and NF events.
|
|
* This will cause timeouts on RO devices, so maybe
|
|
* in the future put an arbitrary delay after writing
|
|
* the device. Arbitrary delays suck, though... */
|
|
if (isRead && (event & SPI_EV_NF))
|
|
break;
|
|
}
|
|
if (tm >= SPI_TIMEOUT)
|
|
puts("*** spi_xfer: Time out during SPI transfer");
|
|
|
|
debug("*** spi_xfer: transfer ended. Value=%08x\n", tmpdin);
|
|
}
|
|
|
|
if (chipsel != NULL)
|
|
(*chipsel) (0); /* deselect the target chip */
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_HARD_SPI */
|
|
|