upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
469 lines
16 KiB
469 lines
16 KiB
/*
|
|
* (C) Copyright 2005-2007
|
|
* Samsung Electronics.
|
|
* Kyungmin Park <kyungmin.park@samsung.com>
|
|
*
|
|
* Derived from omap2420
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/arch/omap2420.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/bits.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/sys_info.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
void wait_for_command_complete(unsigned int wd_base);
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define write_config_reg(reg, value) \
|
|
do { \
|
|
writeb(value, reg); \
|
|
} while (0)
|
|
|
|
#define mask_config_reg(reg, mask) \
|
|
do { \
|
|
char value = readb(reg) & ~(mask); \
|
|
writeb(value, reg); \
|
|
} while (0)
|
|
|
|
/*******************************************************
|
|
* Routine: delay
|
|
* Description: spinning delay to use before udelay works
|
|
******************************************************/
|
|
static inline void delay(unsigned long loops)
|
|
{
|
|
__asm__("1:\n" "subs %0, %1, #1\n"
|
|
"bne 1b":"=r" (loops):"0"(loops));
|
|
}
|
|
|
|
/*****************************************
|
|
* Routine: board_init
|
|
* Description: Early hardware init.
|
|
*****************************************/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init(); /* in SRAM or SDRM, finish GPMC */
|
|
|
|
gd->bd->bi_arch_number = 919;
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**********************************************************
|
|
* Routine: s_init
|
|
* Description: Does early system init of muxing and clocks.
|
|
* - Called path is with sram stack.
|
|
**********************************************************/
|
|
void s_init(void)
|
|
{
|
|
watchdog_init();
|
|
set_muxconf_regs();
|
|
delay(100);
|
|
|
|
peripheral_enable();
|
|
icache_enable();
|
|
}
|
|
|
|
/*******************************************************
|
|
* Routine: misc_init_r
|
|
* Description: Init ethernet (done here so udelay works)
|
|
********************************************************/
|
|
int misc_init_r(void)
|
|
{
|
|
ether_init(); /* better done here so timers are init'ed */
|
|
return (0);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: watchdog_init
|
|
* Description: Shut down watch dogs
|
|
*****************************************/
|
|
void watchdog_init(void)
|
|
{
|
|
/* There are 4 watch dogs. 1 secure, and 3 general purpose.
|
|
* The ROM takes care of the secure one. Of the 3 GP ones,
|
|
* 1 can reset us directly, the other 2 only generate MPU interrupts.
|
|
*/
|
|
__raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
|
|
wait_for_command_complete(WD2_BASE);
|
|
__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
|
|
|
|
#define MPU_WD_CLOCKED 1
|
|
#if MPU_WD_CLOCKED
|
|
/* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
|
|
__raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
|
|
wait_for_command_complete(WD3_BASE);
|
|
__raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
|
|
|
|
__raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
|
|
wait_for_command_complete(WD4_BASE);
|
|
__raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
|
|
#endif
|
|
}
|
|
|
|
/******************************************************
|
|
* Routine: wait_for_command_complete
|
|
* Description: Wait for posting to finish on watchdog
|
|
******************************************************/
|
|
void wait_for_command_complete(unsigned int wd_base)
|
|
{
|
|
int pending = 1;
|
|
do {
|
|
pending = __raw_readl(wd_base + WWPS);
|
|
} while (pending);
|
|
}
|
|
|
|
/*******************************************************************
|
|
* Routine:ether_init
|
|
* Description: take the Ethernet controller out of reset and wait
|
|
* for the EEPROM load to complete.
|
|
******************************************************************/
|
|
void ether_init(void)
|
|
{
|
|
#ifdef CONFIG_DRIVER_LAN91C96
|
|
int cnt = 20;
|
|
|
|
__raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */
|
|
|
|
__raw_writew(0x0, LAN_RESET_REGISTER);
|
|
do {
|
|
__raw_writew(0x1, LAN_RESET_REGISTER);
|
|
udelay(100);
|
|
if (cnt == 0)
|
|
goto eth_reset_err_out;
|
|
--cnt;
|
|
} while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
|
|
|
|
cnt = 20;
|
|
|
|
do {
|
|
__raw_writew(0x0, LAN_RESET_REGISTER);
|
|
udelay(100);
|
|
if (cnt == 0)
|
|
goto eth_reset_err_out;
|
|
--cnt;
|
|
} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
|
|
udelay(1000);
|
|
|
|
mask_config_reg(ETH_CONTROL_REG, 0x01);
|
|
udelay(1000);
|
|
|
|
eth_reset_err_out:
|
|
return;
|
|
#endif
|
|
}
|
|
|
|
/**********************************************
|
|
* Routine: dram_init
|
|
* Description: sets uboots idea of sdram size
|
|
**********************************************/
|
|
int dram_init(void)
|
|
{
|
|
unsigned int size0 = 0, size1 = 0;
|
|
u32 mtype, btype, rev = 0, cpu = 0;
|
|
#define NOT_EARLY 0
|
|
|
|
btype = get_board_type();
|
|
mtype = get_mem_type();
|
|
rev = get_cpu_rev();
|
|
cpu = get_cpu_type();
|
|
|
|
display_board_info(btype);
|
|
|
|
if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
|
|
/* init other chip select */
|
|
do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
|
|
}
|
|
|
|
size0 = get_sdr_cs_size(SDRC_CS0_OSET);
|
|
size1 = get_sdr_cs_size(SDRC_CS1_OSET);
|
|
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = size0;
|
|
#if CONFIG_NR_DRAM_BANKS > 1
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
|
|
gd->bd->bi_dram[1].size = size1;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**********************************************************
|
|
* Routine: set_muxconf_regs
|
|
* Description: Setting up the configuration Mux registers
|
|
* specific to the hardware
|
|
*********************************************************/
|
|
void set_muxconf_regs(void)
|
|
{
|
|
muxSetupSDRC();
|
|
muxSetupGPMC();
|
|
muxSetupUsb0(); /* USB Device */
|
|
muxSetupUsbHost(); /* USB Host */
|
|
muxSetupUART1();
|
|
muxSetupLCD();
|
|
muxSetupMMCSD();
|
|
muxSetupTouchScreen();
|
|
}
|
|
|
|
/*****************************************************************
|
|
* Routine: peripheral_enable
|
|
* Description: Enable the clks & power for perifs (GPT2, UART1,...)
|
|
******************************************************************/
|
|
void peripheral_enable(void)
|
|
{
|
|
unsigned int v, if_clks = 0, func_clks = 0;
|
|
|
|
/* Enable GP2 timer. */
|
|
if_clks |= BIT4 | BIT3;
|
|
func_clks |= BIT4 | BIT3;
|
|
/* Sys_clk input OMAP2420_GPT2 */
|
|
v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;
|
|
__raw_writel(v, CM_CLKSEL2_CORE);
|
|
__raw_writel(0x1, CM_CLKSEL_WKUP);
|
|
|
|
#ifdef CONFIG_SYS_NS16550
|
|
/* Enable UART1 clock */
|
|
func_clks |= BIT21;
|
|
if_clks |= BIT21;
|
|
#endif
|
|
/* Interface clocks on */
|
|
v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;
|
|
__raw_writel(v, CM_ICLKEN1_CORE);
|
|
/* Functional Clocks on */
|
|
v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;
|
|
__raw_writel(v, CM_FCLKEN1_CORE);
|
|
delay(1000);
|
|
|
|
#ifndef KERNEL_UPDATED
|
|
{
|
|
#define V1 0xffffffff
|
|
#define V2 0x00000007
|
|
|
|
__raw_writel(V1, CM_FCLKEN1_CORE);
|
|
__raw_writel(V2, CM_FCLKEN2_CORE);
|
|
__raw_writel(V1, CM_ICLKEN1_CORE);
|
|
__raw_writel(V1, CM_ICLKEN2_CORE);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupUsb0 (ostboot)
|
|
* Description: Setup usb muxing
|
|
*****************************************/
|
|
void muxSetupUsb0(void)
|
|
{
|
|
mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
|
|
mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupUSBHost (ostboot)
|
|
* Description: Setup USB Host muxing
|
|
*****************************************/
|
|
void muxSetupUsbHost(void)
|
|
{
|
|
/* V19 */
|
|
write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
|
|
/* W20 */
|
|
write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
|
|
/* N14 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO69, 3);
|
|
/* P15 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO70, 3);
|
|
/* L18 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO102, 3);
|
|
/* L19 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO103, 3);
|
|
/* K15 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO104, 3);
|
|
/* K14 */
|
|
write_config_reg(CONTROL_PADCONF_GPIO105, 3);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupUART1 (ostboot)
|
|
* Description: Set up uart1 muxing
|
|
*****************************************/
|
|
void muxSetupUART1(void)
|
|
{
|
|
/* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
|
|
/* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
|
|
/* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
|
|
/* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupLCD (ostboot)
|
|
* Description: Setup lcd muxing
|
|
*****************************************/
|
|
void muxSetupLCD(void)
|
|
{
|
|
/* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
|
|
/* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
|
|
/* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
|
|
/* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
|
|
/* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
|
|
/* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
|
|
/* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
|
|
/* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
|
|
/* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
|
|
/* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
|
|
/* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
|
|
/* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
|
|
/* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
|
|
/* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
|
|
/* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
|
|
/* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
|
|
/* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
|
|
/* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
|
|
/* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
|
|
/* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
|
|
/* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
|
|
/* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
|
|
}
|
|
|
|
/****************************************
|
|
* Routine: muxSetupMMCSD (ostboot)
|
|
* Description: set up MMC muxing
|
|
*****************************************/
|
|
void muxSetupMMCSD(void)
|
|
{
|
|
/* SDMMC_CLKI pin configuration, PIN = H15, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
|
|
/* SDMMC_CLKO pin configuration, PIN = G19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
|
|
/* SDMMC_CMD pin configuration, PIN = H18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
|
|
/* SDMMC_DAT0 pin configuration, PIN = F20, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
|
|
/* SDMMC_DAT1 pin configuration, PIN = H14, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
|
|
/* SDMMC_DAT2 pin configuration, PIN = E19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
|
|
/* SDMMC_DAT3 pin configuration, PIN = D19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
|
|
/* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
|
|
/* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
|
|
/* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
|
|
/* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
|
|
/* SDMMC_CDIR pin configuration, PIN = G18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
|
|
}
|
|
|
|
/******************************************
|
|
* Routine: muxSetupTouchScreen (ostboot)
|
|
* Description: Set up touch screen muxing
|
|
*******************************************/
|
|
void muxSetupTouchScreen(void)
|
|
{
|
|
/* SPI1_CLK pin configuration, PIN = U18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
|
|
/* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
|
|
/* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
|
|
/* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
|
|
#define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1
|
|
/* PEN_IRQ pin configuration, PIN = N15, Mode = 3, PUPD=Disabled */
|
|
write_config_reg(CONTROL_PADCONF_GPIO85, 3);
|
|
}
|
|
|
|
/***************************************************************
|
|
* Routine: muxSetupGPMC (ostboot)
|
|
* Description: Configures balls which cam up in protected mode
|
|
***************************************************************/
|
|
void muxSetupGPMC(void)
|
|
{
|
|
/* gpmc_io_dir, MCR */
|
|
volatile unsigned int *MCR = (unsigned int *) 0x4800008C;
|
|
*MCR = 0x19000000;
|
|
|
|
/* NOR FLASH CS0 */
|
|
/* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
|
|
/* MPDB(Multi Port Debug Port) CS1 */
|
|
/* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
|
|
/* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
|
|
/* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
|
|
/* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
|
|
/* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
|
|
/* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
|
|
/* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
|
|
write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
|
|
}
|
|
|
|
/****************************************************************
|
|
* Routine: muxSetupSDRC (ostboot)
|
|
* Description: Configures balls which come up in protected mode
|
|
****************************************************************/
|
|
void muxSetupSDRC(void)
|
|
{
|
|
/* It's set by IPL */
|
|
}
|
|
|