upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/tools/socfpgaimage.c

259 lines
6.7 KiB

/*
* Copyright (C) 2014 Charles Manning <cdhmanning@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* Reference doc http://www.altera.com.cn/literature/hb/cyclone-v/cv_5400A.pdf
* Note this doc is not entirely accurate. Of particular interest to us is the
* "header" length field being in U32s and not bytes.
*
* "Header" is a structure of the following format.
* this is positioned at 0x40.
*
* Endian is LSB.
*
* Offset Length Usage
* -----------------------
* 0x40 4 Validation word 0x31305341
* 0x44 1 Version (whatever, zero is fine)
* 0x45 1 Flags (unused, zero is fine)
* 0x46 2 Length (in units of u32, including the end checksum).
* 0x48 2 Zero
* 0x4A 2 Checksum over the header. NB Not CRC32
*
* At the end of the code we have a 32-bit CRC checksum over whole binary
* excluding the CRC.
*
* Note that the CRC used here is **not** the zlib/Adler crc32. It is the
* CRC-32 used in bzip2, ethernet and elsewhere.
*
* The image is padded out to 64k, because that is what is
* typically used to write the image to the boot medium.
*/
#include "pbl_crc32.h"
#include "imagetool.h"
#include <image.h>
#define HEADER_OFFSET 0x40
#define VALIDATION_WORD 0x31305341
#define PADDED_SIZE 0x10000
/* To allow for adding CRC, the max input size is a bit smaller. */
#define MAX_INPUT_SIZE (PADDED_SIZE - sizeof(uint32_t))
static uint8_t buffer[PADDED_SIZE];
static struct socfpga_header {
uint32_t validation;
uint8_t version;
uint8_t flags;
uint16_t length_u32;
uint16_t zero;
uint16_t checksum;
} header;
/*
* The header checksum is just a very simple checksum over
* the header area.
* There is still a crc32 over the whole lot.
*/
static uint16_t hdr_checksum(struct socfpga_header *header)
{
int len = sizeof(*header) - sizeof(header->checksum);
uint8_t *buf = (uint8_t *)header;
uint16_t ret = 0;
while (--len)
ret += *buf++;
return ret;
}
static void build_header(uint8_t *buf, uint8_t version, uint8_t flags,
uint16_t length_bytes)
{
header.validation = cpu_to_le32(VALIDATION_WORD);
header.version = version;
header.flags = flags;
header.length_u32 = cpu_to_le16(length_bytes/4);
header.zero = 0;
header.checksum = cpu_to_le16(hdr_checksum(&header));
memcpy(buf, &header, sizeof(header));
}
/*
* Perform a rudimentary verification of header and return
* size of image.
*/
static int verify_header(const uint8_t *buf)
{
memcpy(&header, buf, sizeof(header));
if (le32_to_cpu(header.validation) != VALIDATION_WORD)
return -1;
if (le16_to_cpu(header.checksum) != hdr_checksum(&header))
return -1;
return le16_to_cpu(header.length_u32) * 4;
}
/* Sign the buffer and return the signed buffer size */
static int sign_buffer(uint8_t *buf,
uint8_t version, uint8_t flags,
int len, int pad_64k)
{
uint32_t calc_crc;
/* Align the length up */
len = (len + 3) & (~3);
/* Build header, adding 4 bytes to length to hold the CRC32. */
build_header(buf + HEADER_OFFSET, version, flags, len + 4);
/* Calculate and apply the CRC */
calc_crc = ~pbl_crc32(0, (char *)buf, len);
*((uint32_t *)(buf + len)) = cpu_to_le32(calc_crc);
if (!pad_64k)
return len + 4;
return PADDED_SIZE;
}
/* Verify that the buffer looks sane */
static int verify_buffer(const uint8_t *buf)
{
int len; /* Including 32bit CRC */
uint32_t calc_crc;
uint32_t buf_crc;
len = verify_header(buf + HEADER_OFFSET);
if (len < 0) {
fprintf(stderr, "Invalid header\n");
return -1;
}
if (len < HEADER_OFFSET || len > PADDED_SIZE) {
fprintf(stderr, "Invalid header length (%i)\n", len);
return -1;
}
/*
* Adjust length to the base of the CRC.
* Check the CRC.
*/
len -= 4;
calc_crc = ~pbl_crc32(0, (const char *)buf, len);
buf_crc = le32_to_cpu(*((uint32_t *)(buf + len)));
if (buf_crc != calc_crc) {
fprintf(stderr, "CRC32 does not match (%08x != %08x)\n",
buf_crc, calc_crc);
return -1;
}
return 0;
}
/* mkimage glue functions */
static int socfpgaimage_verify_header(unsigned char *ptr, int image_size,
struct image_tool_params *params)
{
if (image_size != PADDED_SIZE)
return -1;
return verify_buffer(ptr);
}
static void socfpgaimage_print_header(const void *ptr)
{
if (verify_buffer(ptr) == 0)
printf("Looks like a sane SOCFPGA preloader\n");
else
printf("Not a sane SOCFPGA preloader\n");
}
static int socfpgaimage_check_params(struct image_tool_params *params)
{
/* Not sure if we should be accepting fflags */
return (params->dflag && (params->fflag || params->lflag)) ||
(params->fflag && (params->dflag || params->lflag)) ||
(params->lflag && (params->dflag || params->fflag));
}
static int socfpgaimage_check_image_types(uint8_t type)
{
if (type == IH_TYPE_SOCFPGAIMAGE)
return EXIT_SUCCESS;
return EXIT_FAILURE;
}
/*
* To work in with the mkimage framework, we do some ugly stuff...
*
* First, socfpgaimage_vrec_header() is called.
* We prepend a fake header big enough to make the file PADDED_SIZE.
* This gives us enough space to do what we want later.
*
* Next, socfpgaimage_set_header() is called.
* We fix up the buffer by moving the image to the start of the buffer.
* We now have some room to do what we need (add CRC and padding).
*/
static int data_size;
#define FAKE_HEADER_SIZE (PADDED_SIZE - data_size)
static int socfpgaimage_vrec_header(struct image_tool_params *params,
struct image_type_params *tparams)
{
struct stat sbuf;
if (params->datafile &&
stat(params->datafile, &sbuf) == 0 &&
sbuf.st_size <= MAX_INPUT_SIZE) {
data_size = sbuf.st_size;
tparams->header_size = FAKE_HEADER_SIZE;
}
return 0;
}
static void socfpgaimage_set_header(void *ptr, struct stat *sbuf, int ifd,
struct image_tool_params *params)
{
uint8_t *buf = (uint8_t *)ptr;
/*
* This function is called after vrec_header() has been called.
* At this stage we have the FAKE_HEADER_SIZE dummy bytes followed by
* data_size image bytes. Total = PADDED_SIZE.
* We need to fix the buffer by moving the image bytes back to
* the beginning of the buffer, then actually do the signing stuff...
*/
memmove(buf, buf + FAKE_HEADER_SIZE, data_size);
memset(buf + data_size, 0, FAKE_HEADER_SIZE);
sign_buffer(buf, 0, 0, data_size, 0);
}
static struct image_type_params socfpgaimage_params = {
.name = "Altera SOCFPGA preloader support",
.vrec_header = socfpgaimage_vrec_header,
.header_size = 0, /* This will be modified by vrec_header() */
.hdr = (void *)buffer,
.check_image_type = socfpgaimage_check_image_types,
.verify_header = socfpgaimage_verify_header,
.print_header = socfpgaimage_print_header,
.set_header = socfpgaimage_set_header,
.check_params = socfpgaimage_check_params,
};
void init_socfpga_image_type(void)
{
register_image_type(&socfpgaimage_params);
}