upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/colibri_t20.h

99 lines
2.5 KiB

/*
* Copyright (C) 2012 Lucas Stach
*
* Configuration settings for the Toradex Colibri T20 modules.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include "tegra20-common.h"
/* High-level configuration options */
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_TEGRA_UARTA_SDIO1
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_COLIBRI_TEGRA2
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* USB host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* General networking support */
#define CONFIG_IP_DEFRAG
#define CONFIG_TFTP_BLOCKSIZE 1536
#define CONFIG_TFTP_TSIZE
/* LCD support */
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CMD_BMP
#define CONFIG_LCD_LOGO
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define MTDIDS_DEFAULT "nand0=tegra_nand"
#define MTDPARTS_DEFAULT "mtdparts=tegra_nand:" \
"2m(u-boot)ro," \
"1m(u-boot-env)," \
"1m(cfgblock)ro," \
"-(ubi)"
/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET (SZ_2M)
#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
#define CONFIG_ENV_SIZE (SZ_64K)
/* UBI */
#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
#define CONFIG_LZO
#define CONFIG_RBTREE
/* Debug commands */
/* Miscellaneous commands */
#define CONFIG_FAT_WRITE
#define BOARD_EXTRA_ENV_SETTINGS \
"mtdparts=" MTDPARTS_DEFAULT "\0"
/* Increase console I/O buffer size */
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE 1024
/* Increase arguments buffer size */
#undef CONFIG_SYS_BARGSIZE
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Increase print buffer size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
/* Increase maximum number of arguments */
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS 32
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
#endif /* __CONFIG_H */