upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
103 lines
3.0 KiB
103 lines
3.0 KiB
#ifndef I2C_EXPORT_H
|
|
#define I2C_EXPORT_H
|
|
|
|
/****************************************************
|
|
*
|
|
* Copyright Motrola 1999
|
|
*
|
|
****************************************************/
|
|
|
|
/* These are the defined return values for the I2C_do_transaction function.
|
|
* Any non-zero value indicates failure. Failure modes can be added for
|
|
* more detailed error reporting.
|
|
*/
|
|
typedef enum _i2c_status
|
|
{
|
|
I2C_SUCCESS = 0,
|
|
I2C_ERROR,
|
|
} I2C_Status;
|
|
|
|
/* These are the defined tasks for I2C_do_transaction.
|
|
* Modes for SLAVE_RCV and SLAVE_XMIT will be added.
|
|
*/
|
|
typedef enum _i2c_transaction_mode
|
|
{
|
|
I2C_MASTER_RCV = 0,
|
|
I2C_MASTER_XMIT = 1,
|
|
} I2C_TRANSACTION_MODE;
|
|
|
|
typedef enum _i2c_interrupt_mode
|
|
{
|
|
I2C_INT_DISABLE = 0,
|
|
I2C_INT_ENABLE = 1,
|
|
} I2C_INTERRUPT_MODE;
|
|
|
|
typedef enum _i2c_stop
|
|
{
|
|
I2C_NO_STOP = 0,
|
|
I2C_STOP = 1,
|
|
} I2C_STOP_MODE;
|
|
|
|
typedef enum _i2c_restart
|
|
{
|
|
I2C_NO_RESTART = 0,
|
|
I2C_RESTART = 1,
|
|
} I2C_RESTART_MODE;
|
|
|
|
/******************** App. API ********************
|
|
* The application API is for user level application
|
|
* to use the functionality provided by I2C driver.
|
|
* This is a "generic" I2C interface, it should contain
|
|
* nothing specific to the Kahlua implementation.
|
|
* Only the generic functions are exported by the library.
|
|
*
|
|
* Note: Its App.s responsibility to swap the data
|
|
* byte. In our API, we just transfer whatever
|
|
* we are given
|
|
**************************************************/
|
|
|
|
|
|
/* Initialize I2C unit with the following:
|
|
* driver's slave address
|
|
* interrupt enabled
|
|
* optional pointer to application layer print function
|
|
*
|
|
* These parameters may be added:
|
|
* desired clock rate
|
|
* digital filter frequency sampling rate
|
|
*
|
|
* This function must be called before I2C unit can be used.
|
|
*/
|
|
extern I2C_Status I2C_Initialize(
|
|
unsigned char addr, /* driver's I2C slave address */
|
|
I2C_INTERRUPT_MODE en_int, /* 1 - enable I2C interrupt
|
|
* 0 - disable I2C interrupt
|
|
*/
|
|
int (*app_print_function)(char *,...)); /* pointer to optional "printf"
|
|
* provided by application
|
|
*/
|
|
|
|
/* Perform the given I2C transaction, only MASTER_XMIT and MASTER_RCV
|
|
* are implemented. Both are only in polling mode.
|
|
*
|
|
* en_int controls interrupt/polling mode
|
|
* act is the type of transaction
|
|
* addr is the I2C address of the slave device
|
|
* len is the length of data to send or receive
|
|
* buffer is the address of the data buffer
|
|
* stop = I2C_NO_STOP, don't signal STOP at end of transaction
|
|
* I2C_STOP, signal STOP at end of transaction
|
|
* retry is the timeout retry value, currently ignored
|
|
* rsta = I2C_NO_RESTART, this is not continuation of existing transaction
|
|
* I2C_RESTART, this is a continuation of existing transaction
|
|
*/
|
|
extern I2C_Status I2C_do_transaction( I2C_INTERRUPT_MODE en_int,
|
|
I2C_TRANSACTION_MODE act,
|
|
unsigned char i2c_addr,
|
|
unsigned char data_addr,
|
|
int len,
|
|
char *buffer,
|
|
I2C_STOP_MODE stop,
|
|
int retry,
|
|
I2C_RESTART_MODE rsta);
|
|
#endif
|
|
|