upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
149 lines
3.6 KiB
149 lines
3.6 KiB
/*
|
|
* Based on the iomux-v3.c from Linux kernel:
|
|
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
|
|
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
|
|
* <armlinux@phytec.de>
|
|
*
|
|
* Copyright (C) 2004-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/imx-common/iomux-v3.h>
|
|
#include <asm/imx-common/sys_proto.h>
|
|
|
|
static void *base = (void *)IOMUXC_BASE_ADDR;
|
|
|
|
/*
|
|
* configures a single pad in the iomuxer
|
|
*/
|
|
void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
|
|
{
|
|
u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
|
|
u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
|
|
u32 sel_input_ofs =
|
|
(pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
|
|
u32 sel_input =
|
|
(pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
|
|
u32 pad_ctrl_ofs =
|
|
(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
|
|
u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
|
|
|
|
#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
|
|
/* Check whether LVE bit needs to be set */
|
|
if (pad_ctrl & PAD_CTL_LVE) {
|
|
pad_ctrl &= ~PAD_CTL_LVE;
|
|
pad_ctrl |= PAD_CTL_LVE_BIT;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_IOMUX_LPSR
|
|
u32 lpsr = (pad & MUX_MODE_LPSR) >> MUX_MODE_SHIFT;
|
|
|
|
#ifdef CONFIG_MX7
|
|
if (lpsr == IOMUX_CONFIG_LPSR) {
|
|
base = (void *)IOMUXC_LPSR_BASE_ADDR;
|
|
mux_mode &= ~IOMUX_CONFIG_LPSR;
|
|
/* set daisy chain sel_input */
|
|
if (sel_input_ofs)
|
|
sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS;
|
|
}
|
|
#else
|
|
if (is_mx6ull() || is_mx6sll()) {
|
|
if (lpsr == IOMUX_CONFIG_LPSR) {
|
|
base = (void *)IOMUXC_SNVS_BASE_ADDR;
|
|
mux_mode &= ~IOMUX_CONFIG_LPSR;
|
|
}
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
if (is_mx7() || is_mx6ull() || is_mx6sll() || mux_ctrl_ofs)
|
|
__raw_writel(mux_mode, base + mux_ctrl_ofs);
|
|
|
|
if (sel_input_ofs)
|
|
__raw_writel(sel_input, base + sel_input_ofs);
|
|
|
|
#ifdef CONFIG_IOMUX_SHARE_CONF_REG
|
|
if (!(pad_ctrl & NO_PAD_CTRL))
|
|
__raw_writel((mux_mode << PAD_MUX_MODE_SHIFT) | pad_ctrl,
|
|
base + pad_ctrl_ofs);
|
|
#else
|
|
if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
|
|
__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
|
|
#if defined(CONFIG_MX6SLL)
|
|
else if ((pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
|
|
clrbits_le32(base + pad_ctrl_ofs, PAD_CTL_IPD_BIT);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_IOMUX_LPSR
|
|
if (lpsr == IOMUX_CONFIG_LPSR)
|
|
base = (void *)IOMUXC_BASE_ADDR;
|
|
#endif
|
|
|
|
}
|
|
|
|
/* configures a list of pads within declared with IOMUX_PADS macro */
|
|
void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
|
|
unsigned count)
|
|
{
|
|
iomux_v3_cfg_t const *p = pad_list;
|
|
int stride;
|
|
int i;
|
|
|
|
#if defined(CONFIG_MX6QDL)
|
|
stride = 2;
|
|
if (!is_mx6dq() && !is_mx6dqp())
|
|
p += 1;
|
|
#else
|
|
stride = 1;
|
|
#endif
|
|
for (i = 0; i < count; i++) {
|
|
imx_iomux_v3_setup_pad(*p);
|
|
p += stride;
|
|
}
|
|
}
|
|
|
|
void imx_iomux_set_gpr_register(int group, int start_bit,
|
|
int num_bits, int value)
|
|
{
|
|
int i = 0;
|
|
u32 reg;
|
|
reg = readl(base + group * 4);
|
|
while (num_bits) {
|
|
reg &= ~(1<<(start_bit + i));
|
|
i++;
|
|
num_bits--;
|
|
}
|
|
reg |= (value << start_bit);
|
|
writel(reg, base + group * 4);
|
|
}
|
|
|
|
#ifdef CONFIG_IOMUX_SHARE_CONF_REG
|
|
void imx_iomux_gpio_set_direction(unsigned int gpio,
|
|
unsigned int direction)
|
|
{
|
|
u32 reg;
|
|
/*
|
|
* Only on Vybrid the input/output buffer enable flags
|
|
* are part of the shared mux/conf register.
|
|
*/
|
|
reg = readl(base + (gpio << 2));
|
|
|
|
if (direction)
|
|
reg |= 0x2;
|
|
else
|
|
reg &= ~0x2;
|
|
|
|
writel(reg, base + (gpio << 2));
|
|
}
|
|
|
|
void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state)
|
|
{
|
|
*gpio_state = readl(base + (gpio << 2)) &
|
|
((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE);
|
|
}
|
|
#endif
|
|
|