upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
503 lines
11 KiB
503 lines
11 KiB
/*
|
|
* Copyright (C) 2010 Samsung Electronics
|
|
* Minkyu Kang <mk7.kang@samsung.com>
|
|
* Kyungmin Park <kyungmin.park@samsung.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <spi.h>
|
|
#include <lcd.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/adc.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <pmic.h>
|
|
#include <usb/s3c_udc.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <max8998_pmic.h>
|
|
#include <asm/arch/watchdog.h>
|
|
#include <libtizen.h>
|
|
#include <ld9040.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct exynos4_gpio_part1 *gpio1;
|
|
struct exynos4_gpio_part2 *gpio2;
|
|
unsigned int board_rev;
|
|
|
|
u32 get_board_rev(void)
|
|
{
|
|
return board_rev;
|
|
}
|
|
|
|
static int get_hwrev(void)
|
|
{
|
|
return board_rev & 0xFF;
|
|
}
|
|
|
|
static void check_hw_revision(void);
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
|
|
get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dram_init_banksize(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
|
|
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
|
|
}
|
|
|
|
static unsigned short get_adc_value(int channel)
|
|
{
|
|
struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
|
|
unsigned short ret = 0;
|
|
unsigned int reg;
|
|
unsigned int loop = 0;
|
|
|
|
writel(channel & 0xF, &adc->adcmux);
|
|
writel((1 << 14) | (49 << 6), &adc->adccon);
|
|
writel(1000 & 0xffff, &adc->adcdly);
|
|
writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
|
|
udelay(10);
|
|
writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
|
|
udelay(10);
|
|
|
|
do {
|
|
udelay(1);
|
|
reg = readl(&adc->adccon);
|
|
} while (!(reg & (1 << 15)) && (loop++ < 1000));
|
|
|
|
ret = readl(&adc->adcdat0) & 0xFFF;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adc_power_control(int on)
|
|
{
|
|
int ret;
|
|
struct pmic *p = get_pmic();
|
|
|
|
if (pmic_probe(p))
|
|
return -1;
|
|
|
|
ret = pmic_set_output(p,
|
|
MAX8998_REG_ONOFF1,
|
|
MAX8998_LDO4, !!on);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int get_hw_revision(void)
|
|
{
|
|
int hwrev, mode0, mode1;
|
|
|
|
adc_power_control(1);
|
|
|
|
mode0 = get_adc_value(1); /* HWREV_MODE0 */
|
|
mode1 = get_adc_value(2); /* HWREV_MODE1 */
|
|
|
|
/*
|
|
* XXX Always set the default hwrev as the latest board
|
|
* ADC = (voltage) / 3.3 * 4096
|
|
*/
|
|
hwrev = 3;
|
|
|
|
#define IS_RANGE(x, min, max) ((x) > (min) && (x) < (max))
|
|
if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200))
|
|
hwrev = 0x0; /* 0.01V 0.01V */
|
|
if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200))
|
|
hwrev = 0x1; /* 610mV 0.01V */
|
|
if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200))
|
|
hwrev = 0x2; /* 1.16V 0.01V */
|
|
if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200))
|
|
hwrev = 0x3; /* 1.79V 0.01V */
|
|
#undef IS_RANGE
|
|
|
|
debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
|
|
|
|
adc_power_control(0);
|
|
|
|
return hwrev;
|
|
}
|
|
|
|
static void check_hw_revision(void)
|
|
{
|
|
int hwrev;
|
|
|
|
hwrev = get_hw_revision();
|
|
|
|
board_rev |= hwrev;
|
|
}
|
|
|
|
#ifdef CONFIG_DISPLAY_BOARDINFO
|
|
int checkboard(void)
|
|
{
|
|
puts("Board:\tUniversal C210\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_GENERIC_MMC
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
int err;
|
|
|
|
switch (get_hwrev()) {
|
|
case 0:
|
|
/*
|
|
* Set the low to enable LDO_EN
|
|
* But when you use the test board for eMMC booting
|
|
* you should set it HIGH since it removes the inverter
|
|
*/
|
|
/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
|
|
s5p_gpio_direction_output(&gpio1->e3, 6, 0);
|
|
break;
|
|
default:
|
|
/*
|
|
* Default reset state is High and there's no inverter
|
|
* But set it as HIGH to ensure
|
|
*/
|
|
/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
|
|
s5p_gpio_direction_output(&gpio1->e1, 3, 1);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* MMC device init
|
|
* mmc0 : eMMC (8-bit buswidth)
|
|
* mmc2 : SD card (4-bit buswidth)
|
|
*/
|
|
err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
|
|
if (err)
|
|
debug("SDMMC0 not configured\n");
|
|
else
|
|
err = s5p_mmc_init(0, 8);
|
|
|
|
/* T-flash detect */
|
|
s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
|
|
s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
|
|
|
|
/*
|
|
* Check the T-flash detect pin
|
|
* GPX3[4] T-flash detect pin
|
|
*/
|
|
if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
|
|
err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
|
|
if (err)
|
|
debug("SDMMC2 not configured\n");
|
|
else
|
|
err = s5p_mmc_init(2, 4);
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_GADGET
|
|
static int s5pc210_phy_control(int on)
|
|
{
|
|
int ret = 0;
|
|
struct pmic *p = get_pmic();
|
|
|
|
if (pmic_probe(p))
|
|
return -1;
|
|
|
|
if (on) {
|
|
ret |= pmic_set_output(p,
|
|
MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
|
|
MAX8998_SAFEOUT1, LDO_ON);
|
|
ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
|
|
MAX8998_LDO3, LDO_ON);
|
|
ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
|
|
MAX8998_LDO8, LDO_ON);
|
|
|
|
} else {
|
|
ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
|
|
MAX8998_LDO8, LDO_OFF);
|
|
ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
|
|
MAX8998_LDO3, LDO_OFF);
|
|
ret |= pmic_set_output(p,
|
|
MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
|
|
MAX8998_SAFEOUT1, LDO_OFF);
|
|
}
|
|
|
|
if (ret) {
|
|
puts("MAX8998 LDO setting error!\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct s3c_plat_otg_data s5pc210_otg_data = {
|
|
.phy_control = s5pc210_phy_control,
|
|
.regs_phy = EXYNOS4_USBPHY_BASE,
|
|
.regs_otg = EXYNOS4_USBOTG_BASE,
|
|
.usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
|
|
.usb_flags = PHY0_SLEEP,
|
|
};
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
wdt_stop();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SOFT_SPI
|
|
static void soft_spi_init(void)
|
|
{
|
|
gpio_direction_output(CONFIG_SOFT_SPI_GPIO_SCLK,
|
|
CONFIG_SOFT_SPI_MODE & SPI_CPOL);
|
|
gpio_direction_output(CONFIG_SOFT_SPI_GPIO_MOSI, 1);
|
|
gpio_direction_input(CONFIG_SOFT_SPI_GPIO_MISO);
|
|
gpio_direction_output(CONFIG_SOFT_SPI_GPIO_CS,
|
|
!(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH));
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS,
|
|
!(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH));
|
|
SPI_SCL(1);
|
|
gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS,
|
|
CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH);
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS,
|
|
!(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH));
|
|
}
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && cs == 0;
|
|
}
|
|
|
|
void universal_spi_scl(int bit)
|
|
{
|
|
gpio_set_value(CONFIG_SOFT_SPI_GPIO_SCLK, bit);
|
|
}
|
|
|
|
void universal_spi_sda(int bit)
|
|
{
|
|
gpio_set_value(CONFIG_SOFT_SPI_GPIO_MOSI, bit);
|
|
}
|
|
|
|
int universal_spi_read(void)
|
|
{
|
|
return gpio_get_value(CONFIG_SOFT_SPI_GPIO_MISO);
|
|
}
|
|
#endif
|
|
|
|
static void init_pmic_lcd(void)
|
|
{
|
|
unsigned char val;
|
|
int ret = 0;
|
|
|
|
struct pmic *p = get_pmic();
|
|
|
|
if (pmic_probe(p))
|
|
return;
|
|
|
|
/* LDO7 1.8V */
|
|
val = 0x02; /* (1800 - 1600) / 100; */
|
|
ret |= pmic_reg_write(p, MAX8998_REG_LDO7, val);
|
|
|
|
/* LDO17 3.0V */
|
|
val = 0xe; /* (3000 - 1600) / 100; */
|
|
ret |= pmic_reg_write(p, MAX8998_REG_LDO17, val);
|
|
|
|
/* Disable unneeded regulators */
|
|
/*
|
|
* ONOFF1
|
|
* Buck1 ON, Buck2 OFF, Buck3 ON, Buck4 ON
|
|
* LDO2 ON, LDO3 OFF, LDO4 OFF, LDO5 ON
|
|
*/
|
|
val = 0xB9;
|
|
ret |= pmic_reg_write(p, MAX8998_REG_ONOFF1, val);
|
|
|
|
/* ONOFF2
|
|
* LDO6 OFF, LDO7 ON, LDO8 OFF, LDO9 ON,
|
|
* LDO10 OFF, LDO11 OFF, LDO12 OFF, LDO13 OFF
|
|
*/
|
|
val = 0x50;
|
|
ret |= pmic_reg_write(p, MAX8998_REG_ONOFF2, val);
|
|
|
|
/* ONOFF3
|
|
* LDO14 OFF, LDO15 OFF, LGO16 OFF, LDO17 OFF
|
|
* EPWRHOLD OFF, EBATTMON OFF, ELBCNFG2 OFF, ELBCNFG1 OFF
|
|
*/
|
|
val = 0x00;
|
|
ret |= pmic_reg_write(p, MAX8998_REG_ONOFF3, val);
|
|
|
|
if (ret)
|
|
puts("LCD pmic initialisation error!\n");
|
|
}
|
|
|
|
static void lcd_cfg_gpio(void)
|
|
{
|
|
unsigned int i, f3_end = 4;
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
/* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */
|
|
s5p_gpio_cfg_pin(&gpio1->f0, i, GPIO_FUNC(2));
|
|
s5p_gpio_cfg_pin(&gpio1->f1, i, GPIO_FUNC(2));
|
|
s5p_gpio_cfg_pin(&gpio1->f2, i, GPIO_FUNC(2));
|
|
/* pull-up/down disable */
|
|
s5p_gpio_set_pull(&gpio1->f0, i, GPIO_PULL_NONE);
|
|
s5p_gpio_set_pull(&gpio1->f1, i, GPIO_PULL_NONE);
|
|
s5p_gpio_set_pull(&gpio1->f2, i, GPIO_PULL_NONE);
|
|
|
|
/* drive strength to max (24bit) */
|
|
s5p_gpio_set_drv(&gpio1->f0, i, GPIO_DRV_4X);
|
|
s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
|
|
s5p_gpio_set_drv(&gpio1->f1, i, GPIO_DRV_4X);
|
|
s5p_gpio_set_rate(&gpio1->f1, i, GPIO_DRV_SLOW);
|
|
s5p_gpio_set_drv(&gpio1->f2, i, GPIO_DRV_4X);
|
|
s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
|
|
}
|
|
|
|
for (i = 0; i < f3_end; i++) {
|
|
/* set GPF3[0:3] for RGB Interface and Data lines (32bit) */
|
|
s5p_gpio_cfg_pin(&gpio1->f3, i, GPIO_FUNC(2));
|
|
/* pull-up/down disable */
|
|
s5p_gpio_set_pull(&gpio1->f3, i, GPIO_PULL_NONE);
|
|
/* drive strength to max (24bit) */
|
|
s5p_gpio_set_drv(&gpio1->f3, i, GPIO_DRV_4X);
|
|
s5p_gpio_set_rate(&gpio1->f3, i, GPIO_DRV_SLOW);
|
|
}
|
|
|
|
/* gpio pad configuration for LCD reset. */
|
|
s5p_gpio_cfg_pin(&gpio2->y4, 5, GPIO_OUTPUT);
|
|
|
|
spi_init();
|
|
}
|
|
|
|
static void reset_lcd(void)
|
|
{
|
|
s5p_gpio_set_value(&gpio2->y4, 5, 1);
|
|
udelay(10000);
|
|
s5p_gpio_set_value(&gpio2->y4, 5, 0);
|
|
udelay(10000);
|
|
s5p_gpio_set_value(&gpio2->y4, 5, 1);
|
|
udelay(100);
|
|
}
|
|
|
|
static void lcd_power_on(void)
|
|
{
|
|
struct pmic *p = get_pmic();
|
|
|
|
if (pmic_probe(p))
|
|
return;
|
|
|
|
pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON);
|
|
pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON);
|
|
}
|
|
|
|
vidinfo_t panel_info = {
|
|
.vl_freq = 60,
|
|
.vl_col = 480,
|
|
.vl_row = 800,
|
|
.vl_width = 480,
|
|
.vl_height = 800,
|
|
.vl_clkp = CONFIG_SYS_HIGH,
|
|
.vl_hsp = CONFIG_SYS_HIGH,
|
|
.vl_vsp = CONFIG_SYS_HIGH,
|
|
.vl_dp = CONFIG_SYS_HIGH,
|
|
|
|
.vl_bpix = 5, /* Bits per pixel */
|
|
|
|
/* LD9040 LCD Panel */
|
|
.vl_hspw = 2,
|
|
.vl_hbpd = 16,
|
|
.vl_hfpd = 16,
|
|
|
|
.vl_vspw = 2,
|
|
.vl_vbpd = 8,
|
|
.vl_vfpd = 8,
|
|
.vl_cmd_allow_len = 0xf,
|
|
|
|
.win_id = 0,
|
|
.cfg_gpio = lcd_cfg_gpio,
|
|
.backlight_on = NULL,
|
|
.lcd_power_on = lcd_power_on,
|
|
.reset_lcd = reset_lcd,
|
|
.dual_lcd_enabled = 0,
|
|
|
|
.init_delay = 0,
|
|
.power_on_delay = 10000,
|
|
.reset_delay = 10000,
|
|
.interface_mode = FIMD_RGB_INTERFACE,
|
|
.mipi_enabled = 0,
|
|
};
|
|
|
|
void init_panel_info(vidinfo_t *vid)
|
|
{
|
|
vid->logo_on = 1;
|
|
vid->resolution = HD_RESOLUTION;
|
|
vid->rgb_mode = MODE_RGB_P;
|
|
|
|
#ifdef CONFIG_TIZEN
|
|
get_tizen_logo_info(vid);
|
|
#endif
|
|
|
|
/* for LD9040. */
|
|
vid->pclk_name = 1; /* MPLL */
|
|
vid->sclk_div = 1;
|
|
|
|
vid->cfg_ldo = ld9040_cfg_ldo;
|
|
vid->enable_ldo = ld9040_enable_ldo;
|
|
|
|
setenv("lcdinfo", "lcd=ld9040");
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
|
|
gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
|
|
|
|
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
#if defined(CONFIG_PMIC)
|
|
pmic_init();
|
|
init_pmic_lcd();
|
|
#endif
|
|
#ifdef CONFIG_SOFT_SPI
|
|
soft_spi_init();
|
|
#endif
|
|
check_hw_revision();
|
|
printf("HW Revision:\t0x%x\n", board_rev);
|
|
|
|
return 0;
|
|
}
|
|
|