upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Mark Asselstine c88ed4cb2e sheevaplug: correct SDRAM address control register ... value The SheevaPlug DevKit is shipped with 4x8 by 1Gb DDR devices in two banks for a total of 512MB of RAM. Based on this configuration the existing values for SDRAM address control register are incorrect and result in random kernel oops as memory is incorrectly accessed (while for example extracting a large tarball such as a rootfs). Based on the hardware configuration along with the supporting documentation from Marvell these are the correct values, as well this change mimics values previously used in Marvell's own u-boot git tree for the SheevaPlug. Other variants of the hardware such as the PogoPlug and TonidoPlug may have different memory configurations but to properly support those additional board directories should be maintained or a better system to support other kwb*.cfg is needed. Tested on SheevaPlug DevKit. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>		15 years ago
..
common	asm-generic: Consolidate errno.h to asm-generic/errno.h	16 years ago
db64360	ppc: Enable full relocation to RAM	15 years ago
db64460	ppc: Enable full relocation to RAM	15 years ago
include	More code cleanup	19 years ago
mv88f6281gtw_ge	Kirkwood: mv88f6281gtw_ge: Add kwbimage build support	15 years ago
openrd_base	Support for the OpenRD base board	15 years ago
rd6281a	Kirkwood: rd6281a: Add kwbimage build support	15 years ago
sheevaplug	sheevaplug: correct SDRAM address control register	15 years ago