Your ROOT_URL in app.ini is https://src.whiteboxsystems.nl/ but you are visiting http://src.whiteboxsystems.nl/Whitebox/u-boot/src/commit/0e905ac28b1e039d74e63232293972bff6b5a0ce/drivers/i2c You should set ROOT_URL correctly, otherwise the web may not work correctly.

upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

Timur Tabi 92477a631b fsl_i2c: increase I2C timeout values and make them configurable ... The value of I2C_TIMEOUT in fsl_i2c.c has several problems. First, it is defined as CONFIG_HZ/4, but it is used as a count of microseconds, so it makes no sense to derive it from a clock rate. Second, the current value (250) is too low for some boards, so it needs to be increased. Third, the timeout necessary for multiple-master arbitration is larger than the timeout for basic read/write operations, so we shouldn't have a single constant for both timeouts. Finally, it would be nice if we could override these values on a per-board basis. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Wolfgang Denk <wd@denx.de> Tested-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Peter Tyser <ptyser@xes-inc.com>		16 years ago
..
Makefile	…
bfin-twi_i2c.c	…
davinci_i2c.c	…
fsl_i2c.c	…
kirkwood_i2c.c	…
mxc_i2c.c	…
omap24xx_i2c.c	…
omap1510_i2c.c	…
s3c24x0_i2c.c	…
s3c44b0_i2c.c	…
soft_i2c.c	…
tsi108_i2c.c	…