upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
116 lines
2.5 KiB
116 lines
2.5 KiB
/*
|
|
* (C) Copyright 2010
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
|
|
* Contributor: Mahavir Jain <mjain@marvell.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/armada100.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* ARMADA100 DRAM controller supports upto 8 banks
|
|
* for chip select 0 and 1
|
|
*/
|
|
|
|
/*
|
|
* DDR Memory Control Registers
|
|
* Refer Datasheet Appendix A.17
|
|
*/
|
|
struct armd1ddr_map_registers {
|
|
u32 cs; /* Memory Address Map Register -CS */
|
|
u32 pad[3];
|
|
};
|
|
|
|
struct armd1ddr_registers {
|
|
u8 pad[0x100 - 0x000];
|
|
struct armd1ddr_map_registers mmap[2];
|
|
};
|
|
|
|
/*
|
|
* armd1_sdram_base - reads SDRAM Base Address Register
|
|
*/
|
|
u32 armd1_sdram_base(int chip_sel)
|
|
{
|
|
struct armd1ddr_registers *ddr_regs =
|
|
(struct armd1ddr_registers *)ARMD1_DRAM_BASE;
|
|
u32 result = 0;
|
|
u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
|
|
|
|
if (!CS_valid)
|
|
return 0;
|
|
|
|
result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000;
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* armd1_sdram_size - reads SDRAM size
|
|
*/
|
|
u32 armd1_sdram_size(int chip_sel)
|
|
{
|
|
struct armd1ddr_registers *ddr_regs =
|
|
(struct armd1ddr_registers *)ARMD1_DRAM_BASE;
|
|
u32 result = 0;
|
|
u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
|
|
|
|
if (!CS_valid)
|
|
return 0;
|
|
|
|
result = readl(&ddr_regs->mmap[chip_sel].cs);
|
|
result = (result >> 16) & 0xF;
|
|
if (result < 0x7) {
|
|
printf("Unknown DRAM Size\n");
|
|
return -1;
|
|
} else {
|
|
return ((0x8 << (result - 0x7)) * 1024 * 1024);
|
|
}
|
|
}
|
|
|
|
#ifndef CONFIG_SYS_BOARD_DRAM_INIT
|
|
int dram_init(void)
|
|
{
|
|
int i;
|
|
|
|
gd->ram_size = 0;
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
|
|
gd->bd->bi_dram[i].start = armd1_sdram_base(i);
|
|
gd->bd->bi_dram[i].size = armd1_sdram_size(i);
|
|
/*
|
|
* It is assumed that all memory banks are consecutive
|
|
* and without gaps.
|
|
* If the gap is found, ram_size will be reported for
|
|
* consecutive memory only
|
|
*/
|
|
if (gd->bd->bi_dram[i].start != gd->ram_size)
|
|
break;
|
|
|
|
gd->ram_size += gd->bd->bi_dram[i].size;
|
|
|
|
}
|
|
|
|
for (; i < CONFIG_NR_DRAM_BANKS; i++) {
|
|
/* If above loop terminated prematurely, we need to set
|
|
* remaining banks' start address & size as 0. Otherwise other
|
|
* u-boot functions and Linux kernel gets wrong values which
|
|
* could result in crash */
|
|
gd->bd->bi_dram[i].start = 0;
|
|
gd->bd->bi_dram[i].size = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If this function is not defined here,
|
|
* board.c alters dram bank zero configuration defined above.
|
|
*/
|
|
void dram_init_banksize(void)
|
|
{
|
|
dram_init();
|
|
}
|
|
#endif /* CONFIG_SYS_BOARD_DRAM_INIT */
|
|
|