upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
65 lines
2.0 KiB
65 lines
2.0 KiB
config AXP221_POWER
|
|
boolean "axp221 / axp223 pmic support"
|
|
depends on MACH_SUN6I || MACH_SUN8I
|
|
default y
|
|
---help---
|
|
Say y here to enable support for the axp221 / axp223 pmic found on most
|
|
sun6i (A31) / sun8i (A23) boards.
|
|
|
|
config AXP221_DCDC1_VOLT
|
|
int "axp221 dcdc1 voltage"
|
|
depends on AXP221_POWER
|
|
default 3000
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dcdc1 at, set to 0 to
|
|
disable dcdc1. This is typically used as generic 3.3V IO voltage for
|
|
things like GPIO-s, sdcard interfaces, etc. On most boards this is
|
|
undervolted to 3.0V to safe battery.
|
|
|
|
config AXP221_DLDO1_VOLT
|
|
int "axp221 dldo1 voltage"
|
|
depends on AXP221_POWER
|
|
default -1
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dldo1 at, set to -1 to
|
|
disable dldo1. On sun6i (A31) boards with ethernet this is often used
|
|
to power the ethernet phy. On sun8i (A23) boards this is often used to
|
|
power the wifi.
|
|
|
|
config AXP221_DLDO4_VOLT
|
|
int "axp221 dldo4 voltage"
|
|
depends on AXP221_POWER
|
|
default -1
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dldo4 at, set to -1 to
|
|
disable dldo4.
|
|
|
|
config AXP221_ALDO1_VOLT
|
|
int "axp221 aldo1 voltage"
|
|
depends on AXP221_POWER
|
|
default -1
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo1 at, set to -1 to
|
|
disable aldo1. On sun6i (A31) boards which have a wifi module this is
|
|
often used to power the wifi module.
|
|
|
|
config AXP221_ALDO2_VOLT
|
|
int "axp221 aldo2 voltage"
|
|
depends on AXP221_POWER
|
|
default 1800 if MACH_SUN6I
|
|
default 2500 if MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo2 at, set to -1 to
|
|
disable aldo2. On sun6i (A31) boards this is typically connected to
|
|
VCC-PM, which powers the port M gpios, and should be set to 1.8V.
|
|
On sun8i (A23) this is typically connected to VDD-DLL and must be
|
|
set to 2.5V.
|
|
|
|
config AXP221_ALDO3_VOLT
|
|
int "axp221 aldo3 voltage"
|
|
depends on AXP221_POWER
|
|
default 3000
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo3 at, set to -1 to
|
|
disable aldo3. This is typically connected to VCC-PLL and AVCC and
|
|
must be set to 3V.
|
|
|