upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/esd/cpci405/cpci405.c

807 lines
18 KiB

/*
* (C) Copyright 2001-2003
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <command.h>
#include <malloc.h>
#include <net.h>
#include <pci.h>
DECLARE_GLOBAL_DATA_PTR;
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/
#if 0
#define FPGA_DEBUG
#endif
/* fpga configuration data - generated by bin2cc */
const unsigned char fpgadata[] =
{
#ifdef CONFIG_CPCI405_VER2
# ifdef CONFIG_CPCI405AB
# include "fpgadata_cpci405ab.c"
# else
# include "fpgadata_cpci4052.c"
# endif
#else
# include "fpgadata_cpci405.c"
#endif
};
/*
* include common fpga code (for esd boards)
*/
#include "../common/fpga.c"
#include "../common/auto_update.h"
#ifdef CONFIG_CPCI405AB
au_image_t au_image[] = {
{"cpci405ab/preinst.img", 0, -1, AU_SCRIPT},
{"cpci405ab/pImage", 0xffc00000, 0x000c0000, AU_NOR},
{"cpci405ab/pImage.initrd", 0xffcc0000, 0x00300000, AU_NOR},
{"cpci405ab/u-boot.img", 0xfffc0000, 0x00040000, AU_FIRMWARE},
{"cpci405ab/postinst.img", 0, 0, AU_SCRIPT},
};
#else
#ifdef CONFIG_CPCI405_VER2
au_image_t au_image[] = {
{"cpci4052/preinst.img", 0, -1, AU_SCRIPT},
{"cpci4052/pImage", 0xffc00000, 0x000c0000, AU_NOR},
{"cpci4052/pImage.initrd", 0xffcc0000, 0x00300000, AU_NOR},
{"cpci4052/u-boot.img", 0xfffc0000, 0x00040000, AU_FIRMWARE},
{"cpci4052/postinst.img", 0, 0, AU_SCRIPT},
};
#else
au_image_t au_image[] = {
{"cpci405/preinst.img", 0, -1, AU_SCRIPT},
{"cpci405/pImage", 0xffc00000, 0x000c0000, AU_NOR},
{"cpci405/pImage.initrd", 0xffcc0000, 0x00310000, AU_NOR},
{"cpci405/u-boot.img", 0xfffd0000, 0x00030000, AU_FIRMWARE},
{"cpci405/postinst.img", 0, 0, AU_SCRIPT},
};
#endif
#endif
int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
/* Prototypes */
int cpci405_version(void);
int gunzip(void *, int, unsigned char *, unsigned long *);
void lxt971_no_sleep(void);
int board_early_init_f (void)
{
#ifndef CONFIG_CPCI405_VER2
int index, len, i;
int status;
#endif
#ifdef FPGA_DEBUG
/* set up serial port with default baudrate */
(void) get_clocks ();
gd->baudrate = CONFIG_BAUDRATE;
serial_init ();
console_init_f();
#endif
/*
* First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
*/
out32(GPIO0_ODR, 0x00000000); /* no open drain pins */
out32(GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */
out32(GPIO0_OR, CFG_FPGA_PRG); /* set output pins to high */
out32(GPIO0_OR, 0); /* pull prg low */
/*
* Boot onboard FPGA
*/
#ifndef CONFIG_CPCI405_VER2
if (cpci405_version() == 1) {
status = fpga_boot((unsigned char *)fpgadata, sizeof(fpgadata));
if (status != 0) {
/* booting FPGA failed */
#ifndef FPGA_DEBUG
/* set up serial port with default baudrate */
(void) get_clocks ();
gd->baudrate = CONFIG_BAUDRATE;
serial_init ();
console_init_f();
#endif
printf("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf("(Timeout: DONE not high after programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = fpgadata[index];
printf("FPGA: %s\n", &(fpgadata[index+1]));
index += len+3;
}
putc ('\n');
/* delayed reboot */
for (i=20; i>0; i--) {
printf("Rebooting in %2d seconds \r",i);
for (index=0;index<1000;index++)
udelay(1000);
}
putc ('\n');
do_reset(NULL, 0, 0, NULL);
}
}
#endif /* !CONFIG_CPCI405_VER2 */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
* IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052) ; active low; level sensitive
* IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
* IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
* IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicer, 0x00000000); /* disable all ints */
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
#ifdef CONFIG_CPCI405_6U
if (cpci405_version() == 3) {
mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */
} else {
mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
}
#else
mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
#endif
mtdcr(uictr, 0x10000000); /* set int trigger levels */
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
return 0;
}
/* ------------------------------------------------------------------------- */
int ctermm2(void)
{
#ifdef CONFIG_CPCI405_VER2
return 0; /* no, board is cpci405 */
#else
if ((*(unsigned char *)0xf0000400 == 0x00) &&
(*(unsigned char *)0xf0000401 == 0x01))
return 0; /* no, board is cpci405 */
else
return -1; /* yes, board is cterm-m2 */
#endif
}
int cpci405_host(void)
{
if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
return -1; /* yes, board is cpci405 host */
else
return 0; /* no, board is cpci405 adapter */
}
int cpci405_version(void)
{
unsigned long cntrl0Reg;
unsigned long value;
/*
* Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
*/
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x03000000);
out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
udelay(1000); /* wait some time before reading input */
value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */
/*
* Restore GPIO settings
*/
mtdcr(cntrl0, cntrl0Reg);
switch (value) {
case 0x00180000:
/* CS2==1 && CS3==1 -> version 1 */
return 1;
case 0x00080000:
/* CS2==0 && CS3==1 -> version 2 */
return 2;
case 0x00100000:
/* CS2==1 && CS3==0 -> version 3 or 6U board */
return 3;
case 0x00000000:
/* CS2==0 && CS3==0 -> version 4 */
return 4;
default:
/* should not be reached! */
return 2;
}
}
int misc_init_f (void)
{
return 0; /* dummy implementation */
}
int misc_init_r (void)
{
unsigned long cntrl0Reg;
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
#ifdef CONFIG_CPCI405_VER2
{
unsigned char *dst;
ulong len = sizeof(fpgadata);
int status;
int index;
int i;
/*
* On CPCI-405 version 2 the environment is saved in eeprom!
* FPGA can be gzip compressed (malloc) and booted this late.
*/
if (cpci405_version() >= 2) {
/*
* Setup GPIO pins (CS6+CS7 as GPIO)
*/
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x00300000);
dst = malloc(CFG_FPGA_MAX_SIZE);
if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
do_reset (NULL, 0, 0, NULL);
}
status = fpga_boot(dst, len);
if (status != 0) {
printf("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf("(Timeout: DONE not high after programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = dst[index];
printf("FPGA: %s\n", &(dst[index+1]));
index += len+3;
}
putc ('\n');
/* delayed reboot */
for (i=20; i>0; i--) {
printf("Rebooting in %2d seconds \r",i);
for (index=0;index<1000;index++)
udelay(1000);
}
putc ('\n');
do_reset(NULL, 0, 0, NULL);
}
/* restore gpio/cs settings */
mtdcr(cntrl0, cntrl0Reg);
puts("FPGA: ");
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = dst[index];
printf("%s ", &(dst[index+1]));
index += len+3;
}
putc ('\n');
free(dst);
/*
* Reset FPGA via FPGA_DATA pin
*/
SET_FPGA(FPGA_PRG | FPGA_CLK);
udelay(1000); /* wait 1ms */
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
udelay(1000); /* wait 1ms */
#ifdef CONFIG_CPCI405_6U
if (cpci405_version() == 3) {
volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR;
/*
* Enable outputs in fpga on version 3 board
*/
*fpga_mode |= CFG_FPGA_MODE_ENABLE_OUTPUT;
/*
* Set outputs to 0
*/
*leds = 0x00;
/*
* Reset external DUART
*/
*fpga_mode |= CFG_FPGA_MODE_DUART_RESET;
udelay(100);
*fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET);
}
#endif
}
else {
puts("\n*** U-Boot Version does not match Board Version!\n");
puts("*** CPCI-405 Version 1.x detected!\n");
puts("*** Please use correct U-Boot version (CPCI405 instead of CPCI4052)!\n\n");
}
}
#else /* CONFIG_CPCI405_VER2 */
#if 0 /* test-only: code-plug now not relavant for ip-address any more */
/*
* Generate last byte of ip-addr from code-plug @ 0xf0000400
*/
if (ctermm2()) {
char str[32];
unsigned char ipbyte = *(unsigned char *)0xf0000400;
/*
* Only overwrite ip-addr with allowed values
*/
if ((ipbyte != 0x00) && (ipbyte != 0xff)) {
bd->bi_ip_addr = (bd->bi_ip_addr & 0xffffff00) | ipbyte;
sprintf(str, "%ld.%ld.%ld.%ld",
(bd->bi_ip_addr & 0xff000000) >> 24,
(bd->bi_ip_addr & 0x00ff0000) >> 16,
(bd->bi_ip_addr & 0x0000ff00) >> 8,
(bd->bi_ip_addr & 0x000000ff));
setenv("ipaddr", str);
}
}
#endif
if (cpci405_version() >= 2) {
puts("\n*** U-Boot Version does not match Board Version!\n");
puts("*** CPCI-405 Board Version 2.x detected!\n");
puts("*** Please use correct U-Boot version (CPCI4052 instead of CPCI405)!\n\n");
}
#endif /* CONFIG_CPCI405_VER2 */
/*
* Select cts (and not dsr) on uart1
*/
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x00001000);
return (0);
}
/*
* Check Board Identity:
*/
int checkboard (void)
{
#ifndef CONFIG_CPCI405_VER2
int index;
int len;
#endif
char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
unsigned short ver;
puts ("Board: ");
if (i == -1) {
puts ("### No HW ID - assuming CPCI405");
} else {
puts(str);
}
ver = cpci405_version();
printf(" (Ver %d.x, ", ver);
#if 0 /* test-only */
if (ver >= 2) {
volatile u16 *fpga_status = (u16 *)CFG_FPGA_BASE_ADDR + 1;
if (*fpga_status & CFG_FPGA_STATUS_FLASH) {
puts ("FLASH Bank B, ");
} else {
puts ("FLASH Bank A, ");
}
}
#endif
if (ctermm2()) {
char str[4];
/*
* Read board-id and save in env-variable
*/
sprintf(str, "%d", *(unsigned char *)0xf0000400);
setenv("boardid", str);
printf("CTERM-M2 - Id=%s)", str);
} else {
if (cpci405_host()) {
puts ("PCI Host Version)");
} else {
puts ("PCI Adapter Version)");
}
}
#ifndef CONFIG_CPCI405_VER2
puts ("\nFPGA: ");
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = fpgadata[index];
printf("%s ", &(fpgadata[index+1]));
index += len+3;
}
#endif
putc ('\n');
return 0;
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
unsigned long val;
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
void reset_phy(void)
{
#ifdef CONFIG_LXT971_NO_SLEEP
/*
* Disable sleep mode in LXT971
*/
lxt971_no_sleep();
#endif
}
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_CPCI405_VER2
#ifdef CONFIG_IDE_RESET
void ide_set_reset(int on)
{
volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
/*
* Assert or deassert CompactFlash Reset Pin
*/
if (on) { /* assert RESET */
*fpga_mode &= ~(CFG_FPGA_MODE_CF_RESET);
} else { /* release RESET */
*fpga_mode |= CFG_FPGA_MODE_CF_RESET;
}
}
#endif /* CONFIG_IDE_RESET */
#endif /* CONFIG_CPCI405_VER2 */
#if defined(CONFIG_PCI)
void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
unsigned char int_line = 0xff;
/*
* Write pci interrupt line register (cpci405 specific)
*/
switch (PCI_DEV(dev) & 0x03) {
case 0:
int_line = 27 + 2;
break;
case 1:
int_line = 27 + 3;
break;
case 2:
int_line = 27 + 0;
break;
case 3:
int_line = 27 + 1;
break;
}
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
}
int pci_pre_init(struct pci_controller *hose)
{
hose->fixup_irq = cpci405_pci_fixup_irq;
return 1;
}
#endif /* defined(CONFIG_PCI) */
#ifdef CONFIG_CPCI405AB
#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
|= CFG_FPGA_MODE_1WIRE_DIR)
#define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
&= ~CFG_FPGA_MODE_1WIRE_DIR)
#define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \
& CFG_FPGA_MODE_1WIRE)
/*
* Generate a 1-wire reset, return 1 if no presence detect was found,
* return 0 otherwise.
* (NOTE: Does not handle alarm presence from DS2404/DS1994)
*/
int OWTouchReset(void)
{
int result;
ONE_WIRE_CLEAR;
udelay(480);
ONE_WIRE_SET;
udelay(70);
result = ONE_WIRE_GET;
udelay(410);
return result;
}
/*
* Send 1 a 1-wire write bit.
* Provide 10us recovery time.
*/
void OWWriteBit(int bit)
{
if (bit) {
/*
* write '1' bit
*/
ONE_WIRE_CLEAR;
udelay(6);
ONE_WIRE_SET;
udelay(64);
} else {
/*
* write '0' bit
*/
ONE_WIRE_CLEAR;
udelay(60);
ONE_WIRE_SET;
udelay(10);
}
}
/*
* Read a bit from the 1-wire bus and return it.
* Provide 10us recovery time.
*/
int OWReadBit(void)
{
int result;
ONE_WIRE_CLEAR;
udelay(6);
ONE_WIRE_SET;
udelay(9);
result = ONE_WIRE_GET;
udelay(55);
return result;
}
void OWWriteByte(int data)
{
int loop;
for (loop=0; loop<8; loop++) {
OWWriteBit(data & 0x01);
data >>= 1;
}
}
int OWReadByte(void)
{
int loop, result = 0;
for (loop=0; loop<8; loop++) {
result >>= 1;
if (OWReadBit()) {
result |= 0x80;
}
}
return result;
}
int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
volatile unsigned short val;
int result;
int i;
unsigned char ow_id[6];
char str[32];
unsigned char ow_crc;
/*
* Clear 1-wire bit (open drain with pull-up)
*/
val = *(volatile unsigned short *)0xf0400000;
val &= ~0x1000; /* clear 1-wire bit */
*(volatile unsigned short *)0xf0400000 = val;
result = OWTouchReset();
if (result != 0) {
puts("No 1-wire device detected!\n");
}
OWWriteByte(0x33); /* send read rom command */
OWReadByte(); /* skip family code ( == 0x01) */
for (i=0; i<6; i++) {
ow_id[i] = OWReadByte();
}
ow_crc = OWReadByte(); /* read crc */
sprintf(str, "%08X%04X", *(unsigned int *)&ow_id[0], *(unsigned short *)&ow_id[4]);
printf("Setting environment variable 'ow_id' to %s\n", str);
setenv("ow_id", str);
return 0;
}
U_BOOT_CMD(
onewire, 1, 1, do_onewire,
"onewire - Read 1-write ID\n",
NULL
);
#define CFG_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT28WC32 */
#define CFG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars*/
/*
* Write backplane ip-address...
*/
int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
bd_t *bd = gd->bd;
char *buf;
ulong crc;
char str[32];
char *ptr;
IPaddr_t ipaddr;
buf = malloc(CFG_ENV_SIZE_2);
if (eeprom_read(CFG_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CFG_ENV_SIZE_2)) {
puts("\nError reading backplane EEPROM!\n");
} else {
crc = crc32(0, (uchar *)(buf+4), CFG_ENV_SIZE_2-4);
if (crc != *(ulong *)buf) {
printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(ulong *)buf);
return -1;
}
/*
* Find bp_ip
*/
ptr = strstr(buf+4, "bp_ip=");
if (ptr == NULL) {
printf("ERROR: bp_ip not found!\n");
return -1;
}
ptr += 6;
ipaddr = string_to_ip(ptr);
/*
* Update whole ip-addr
*/
bd->bi_ip_addr = ipaddr;
sprintf(str, "%ld.%ld.%ld.%ld",
(bd->bi_ip_addr & 0xff000000) >> 24,
(bd->bi_ip_addr & 0x00ff0000) >> 16,
(bd->bi_ip_addr & 0x0000ff00) >> 8,
(bd->bi_ip_addr & 0x000000ff));
setenv("ipaddr", str);
printf("Updated ip_addr from bp_eeprom to %s!\n", str);
}
free(buf);
return 0;
}
U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip,
"getbpip - Update IP-Address with Backplane IP-Address\n",
NULL
);
/*
* Set and print backplane ip...
*/
int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *buf;
char str[32];
ulong crc;
if (argc < 2) {
puts("ERROR!\n");
return -1;
}
printf("Setting bp_ip to %s\n", argv[1]);
buf = malloc(CFG_ENV_SIZE_2);
memset(buf, 0, CFG_ENV_SIZE_2);
sprintf(str, "bp_ip=%s", argv[1]);
strcpy(buf+4, str);
crc = crc32(0, (uchar *)(buf+4), CFG_ENV_SIZE_2-4);
*(ulong *)buf = crc;
if (eeprom_write(CFG_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CFG_ENV_SIZE_2)) {
puts("\nError writing backplane EEPROM!\n");
}
free(buf);
return 0;
}
U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip,
"setbpip - Write Backplane IP-Address\n",
NULL
);
#endif /* CONFIG_CPCI405AB */