upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/asm-arm/arch-pxa/mmc.h

207 lines
5.7 KiB

/*
* linux/drivers/mmc/mmc_pxa.h
*
* Author: Vladimir Shebordaev, Igor Oblakov
* Copyright: MontaVista Software Inc.
*
* $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MMC_PXA_P_H__
#define __MMC_PXA_P_H__
/* PXA-250 MMC controller registers */
/* MMC_STRPCL */
#define MMC_STRPCL_STOP_CLK (0x0001UL)
#define MMC_STRPCL_START_CLK (0x0002UL)
/* MMC_STAT */
#define MMC_STAT_END_CMD_RES (0x0001UL << 13)
#define MMC_STAT_PRG_DONE (0x0001UL << 12)
#define MMC_STAT_DATA_TRAN_DONE (0x0001UL << 11)
#define MMC_STAT_CLK_EN (0x0001UL << 8)
#define MMC_STAT_RECV_FIFO_FULL (0x0001UL << 7)
#define MMC_STAT_XMIT_FIFO_EMPTY (0x0001UL << 6)
#define MMC_STAT_RES_CRC_ERROR (0x0001UL << 5)
#define MMC_STAT_SPI_READ_ERROR_TOKEN (0x0001UL << 4)
#define MMC_STAT_CRC_READ_ERROR (0x0001UL << 3)
#define MMC_STAT_CRC_WRITE_ERROR (0x0001UL << 2)
#define MMC_STAT_TIME_OUT_RESPONSE (0x0001UL << 1)
#define MMC_STAT_READ_TIME_OUT (0x0001UL)
#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR|MMC_STAT_SPI_READ_ERROR_TOKEN\
|MMC_STAT_CRC_READ_ERROR|MMC_STAT_TIME_OUT_RESPONSE\
|MMC_STAT_READ_TIME_OUT|MMC_STAT_CRC_WRITE_ERROR)
/* MMC_CLKRT */
#define MMC_CLKRT_20MHZ (0x0000UL)
#define MMC_CLKRT_10MHZ (0x0001UL)
#define MMC_CLKRT_5MHZ (0x0002UL)
#define MMC_CLKRT_2_5MHZ (0x0003UL)
#define MMC_CLKRT_1_25MHZ (0x0004UL)
#define MMC_CLKRT_0_625MHZ (0x0005UL)
#define MMC_CLKRT_0_3125MHZ (0x0006UL)
/* MMC_SPI */
#define MMC_SPI_DISABLE (0x00UL)
#define MMC_SPI_EN (0x01UL)
#define MMC_SPI_CS_EN (0x01UL << 2)
#define MMC_SPI_CS_ADDRESS (0x01UL << 3)
#define MMC_SPI_CRC_ON (0x01UL << 1)
/* MMC_CMDAT */
#define MMC_CMDAT_SD_4DAT (0x0001UL << 8)
#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7)
#define MMC_CMDAT_INIT (0x0001UL << 6)
#define MMC_CMDAT_BUSY (0x0001UL << 5)
#define MMC_CMDAT_BCR (0x0003UL << 5)
#define MMC_CMDAT_STREAM (0x0001UL << 4)
#define MMC_CMDAT_BLOCK (0x0000UL << 4)
#define MMC_CMDAT_WRITE (0x0001UL << 3)
#define MMC_CMDAT_READ (0x0000UL << 3)
#define MMC_CMDAT_DATA_EN (0x0001UL << 2)
#define MMC_CMDAT_R0 (0)
#define MMC_CMDAT_R1 (0x0001UL)
#define MMC_CMDAT_R2 (0x0002UL)
#define MMC_CMDAT_R3 (0x0003UL)
/* MMC_RESTO */
#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */
/* MMC_RDTO */
#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */
/* MMC_BLKLEN */
#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */
/* MMC_PRTBUF */
#define MMC_PRTBUF_BUF_PART_FULL (0x01UL)
#define MMC_PRTBUF_BUF_FULL (0x00UL )
/* MMC_I_MASK */
#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6)
#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5)
#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4)
#define MMC_I_MASK_STOP_CMD (0x01UL << 3)
#define MMC_I_MASK_END_CMD_RES (0x01UL << 2)
#define MMC_I_MASK_PRG_DONE (0x01UL << 1)
#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL)
#define MMC_I_MASK_ALL (0x07fUL)
/* MMC_I_REG */
#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6)
#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5)
#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4)
#define MMC_I_REG_STOP_CMD (0x01UL << 3)
#define MMC_I_REG_END_CMD_RES (0x01UL << 2)
#define MMC_I_REG_PRG_DONE (0x01UL << 1)
#define MMC_I_REG_DATA_TRAN_DONE (0x01UL)
#define MMC_I_REG_ALL (0x007fUL)
/* MMC_CMD */
#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */
#define CMD(x) (x)
#define MMC_DEFAULT_RCA 1
#define MMC_BLOCK_SIZE 512
#define MMC_CMD_RESET 0
#define MMC_CMD_SEND_OP_COND 1
#define MMC_CMD_ALL_SEND_CID 2
#define MMC_CMD_SET_RCA 3
#define MMC_CMD_SELECT_CARD 7
#define MMC_CMD_SEND_CSD 9
#define MMC_CMD_SEND_CID 10
#define MMC_CMD_SEND_STATUS 13
#define MMC_CMD_SET_BLOCKLEN 16
#define MMC_CMD_READ_BLOCK 17
#define MMC_CMD_RD_BLK_MULTI 18
#define MMC_CMD_WRITE_BLOCK 24
#define MMC_CMD_APP_CMD 55
#define SD_CMD_APP_SET_BUS_WIDTH 6
#define SD_CMD_APP_OP_COND 41
#define MMC_MAX_BLOCK_SIZE 512
#define MMC_R1_IDLE_STATE 0x01
#define MMC_R1_ERASE_STATE 0x02
#define MMC_R1_ILLEGAL_CMD 0x04
#define MMC_R1_COM_CRC_ERR 0x08
#define MMC_R1_ERASE_SEQ_ERR 0x01
#define MMC_R1_ADDR_ERR 0x02
#define MMC_R1_PARAM_ERR 0x04
#define MMC_R1B_WP_ERASE_SKIP 0x0002
#define MMC_R1B_ERR 0x0004
#define MMC_R1B_CC_ERR 0x0008
#define MMC_R1B_CARD_ECC_ERR 0x0010
#define MMC_R1B_WP_VIOLATION 0x0020
#define MMC_R1B_ERASE_PARAM 0x0040
#define MMC_R1B_OOR 0x0080
#define MMC_R1B_IDLE_STATE 0x0100
#define MMC_R1B_ERASE_RESET 0x0200
#define MMC_R1B_ILLEGAL_CMD 0x0400
#define MMC_R1B_COM_CRC_ERR 0x0800
#define MMC_R1B_ERASE_SEQ_ERR 0x1000
#define MMC_R1B_ADDR_ERR 0x2000
#define MMC_R1B_PARAM_ERR 0x4000
typedef struct mmc_cid
{
/* FIXME: BYTE_ORDER */
uchar year:4,
month:4;
uchar sn[3];
uchar fwrev:4,
hwrev:4;
uchar name[6];
uchar id[3];
} mmc_cid_t;
typedef struct mmc_csd
{
uint8_t csd_structure:2,
spec_ver:4,
rsvd1:2;
uint8_t taac;
uint8_t nsac;
uint8_t tran_speed;
uint16_t ccc:12,
read_bl_len:4;
uint64_t read_bl_partial:1,
write_blk_misalign:1,
read_blk_misalign:1,
dsr_imp:1,
rsvd2:2,
c_size:12,
vdd_r_curr_min:3,
vdd_r_curr_max:3,
vdd_w_curr_min:3,
vdd_w_curr_max:3,
c_size_mult:3,
erase_blk_en:1,
sector_size:7,
wp_grp_size:7,
wp_grp_enable:1,
default_ecc:2,
r2w_factor:3,
write_bl_len:4,
write_bl_partial:1,
rsvd3:4,
content_prot_app:1;
uint8_t file_format_grp:1,
copy:1,
perm_write_protect:1,
tmp_write_protect:1,
file_format:2,
ecc:2;
} mmc_csd_t;
#endif /* __MMC_PXA_P_H__ */