upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
128 lines
3.1 KiB
128 lines
3.1 KiB
/*
|
|
* Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <vbe.h>
|
|
#include <video.h>
|
|
#include <asm/fsp/fsp_support.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct pixel {
|
|
u8 pos;
|
|
u8 size;
|
|
};
|
|
|
|
static const struct fsp_framebuffer {
|
|
struct pixel red;
|
|
struct pixel green;
|
|
struct pixel blue;
|
|
struct pixel rsvd;
|
|
} fsp_framebuffer_format_map[] = {
|
|
[pixel_rgbx_8bpc] = { {0, 8}, {8, 8}, {16, 8}, {24, 8} },
|
|
[pixel_bgrx_8bpc] = { {16, 8}, {8, 8}, {0, 8}, {24, 8} },
|
|
};
|
|
|
|
static int save_vesa_mode(struct vesa_mode_info *vesa)
|
|
{
|
|
const struct hob_graphics_info *ginfo;
|
|
const struct fsp_framebuffer *fbinfo;
|
|
|
|
ginfo = fsp_get_graphics_info(gd->arch.hob_list, NULL);
|
|
|
|
/*
|
|
* If there is no graphics info structure, bail out and keep
|
|
* running on the serial console.
|
|
*
|
|
* Note: on some platforms (eg: Braswell), the FSP will not produce
|
|
* the graphics info HOB unless you plug some cables to the display
|
|
* interface (eg: HDMI) on the board.
|
|
*/
|
|
if (!ginfo) {
|
|
debug("FSP graphics hand-off block not found\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
vesa->x_resolution = ginfo->width;
|
|
vesa->y_resolution = ginfo->height;
|
|
vesa->bits_per_pixel = 32;
|
|
vesa->bytes_per_scanline = ginfo->pixels_per_scanline * 4;
|
|
vesa->phys_base_ptr = ginfo->fb_base;
|
|
|
|
if (ginfo->pixel_format >= pixel_bitmask) {
|
|
debug("FSP set unknown framebuffer format: %d\n",
|
|
ginfo->pixel_format);
|
|
return -EINVAL;
|
|
}
|
|
fbinfo = &fsp_framebuffer_format_map[ginfo->pixel_format];
|
|
vesa->red_mask_size = fbinfo->red.size;
|
|
vesa->red_mask_pos = fbinfo->red.pos;
|
|
vesa->green_mask_size = fbinfo->green.size;
|
|
vesa->green_mask_pos = fbinfo->green.pos;
|
|
vesa->blue_mask_size = fbinfo->blue.size;
|
|
vesa->blue_mask_pos = fbinfo->blue.pos;
|
|
vesa->reserved_mask_size = fbinfo->rsvd.size;
|
|
vesa->reserved_mask_pos = fbinfo->rsvd.pos;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsp_video_probe(struct udevice *dev)
|
|
{
|
|
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
|
|
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct vesa_mode_info *vesa = &mode_info.vesa;
|
|
int ret;
|
|
|
|
printf("Video: ");
|
|
|
|
/* Initialize vesa_mode_info structure */
|
|
ret = save_vesa_mode(vesa);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/*
|
|
* The framebuffer base address in the FSP graphics info HOB reflects
|
|
* the value assigned by the FSP. After PCI enumeration the framebuffer
|
|
* base address may be relocated. Let's get the updated one from device.
|
|
*
|
|
* For IGD, it seems to be always on BAR2.
|
|
*/
|
|
vesa->phys_base_ptr = dm_pci_read_bar32(dev, 2);
|
|
|
|
ret = vbe_setup_video_priv(vesa, uc_priv, plat);
|
|
if (ret)
|
|
goto err;
|
|
|
|
printf("%dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
|
|
vesa->bits_per_pixel);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printf("No video mode configured in FSP!\n");
|
|
return ret;
|
|
}
|
|
|
|
static const struct udevice_id fsp_video_ids[] = {
|
|
{ .compatible = "fsp-fb" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(fsp_video) = {
|
|
.name = "fsp_video",
|
|
.id = UCLASS_VIDEO,
|
|
.of_match = fsp_video_ids,
|
|
.probe = fsp_video_probe,
|
|
};
|
|
|
|
static struct pci_device_id fsp_video_supported[] = {
|
|
{ PCI_DEVICE_CLASS(PCI_CLASS_DISPLAY_VGA << 8, 0xffff00) },
|
|
{ },
|
|
};
|
|
|
|
U_BOOT_PCI_DEVICE(fsp_video, fsp_video_supported);
|
|
|