upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc
..
SPL
device-tree-bindings
uImage.FIT
I2C_Edge_Conditions
README.440-DDR-performance
README.AMCC-eval-boards-cleanup
README.ARM-SoC
README.ARM-memory-map
README.AVR32
README.AVR32-port-muxing
README.JFFS2
README.JFFS2_NAND
README.LED
README.LED_display
README.MPC866
README.Modem
README.N1213
README.NDS32
README.NetConsole
README.OFT
README.POST
README.SNTP
README.SPL
README.VLAN
README.ag102
README.arm-caches
README.arm-relocation
README.at91
README.at91-soc
README.atmel_mci
README.atmel_pmecc
README.autoboot
README.bedbug
README.bitbangMII
README.blackfin
README.bus_vcxk
README.cfi
README.commands
README.commands.itest
README.commands.spl
README.console
README.davinci
README.davinci.nand_spl
README.designware_eth
README.dns
README.drivers.eth
README.enetaddr
README.fdt-control
README.fsl-ddr
README.fsl-hwconfig
README.generic_usb_ohci
README.hwconfig
README.idma2intr
README.imx5
README.imx31
README.imximage
README.iomux
README.kwbimage
README.link-local
README.lynxkdi
README.m28
README.m68k
README.marubun-pcmcia
README.menu
README.mips
README.mpc5xx
README.mpc74xx
README.mpc83xx.ddrecc
README.mpc83xxads
README.mpc85xx
README.mpc85xxads
README.mpc85xxcds
README.mx28_common
README.mx28evk
README.nand
README.nand-boot-ppc440
README.ne2000
README.ns9750dev
README.omap-ulpi-viewport
README.omap3
README.ppc440
README.pxe
README.s5pc1xx
README.sata
README.sched
README.scrapyard
README.serial_multi
README.sh
README.sha1
README.silent
README.spear
README.srio-boot-corenet
README.standalone
README.switch_config
README.ubi
README.ublimage
README.update
README.usb
README.video
README.zfs
feature-removal-schedule.txt
git-mailrc
kwboot.1
mkimage.1

README.zfs

This patch series adds support for ZFS listing and load to u-boot.

To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS

Steps to test:

1. After applying the patch, zfs specific commands can be seen
in the boot loader prompt using
UBOOT #help

zfsload- load binary file from a ZFS file system
zfsls - list files in a directory (default /)

2. To list the files in zfs pool, device or partition, execute
zfsls <interface> <dev[:part]> [POOL/@/dir/file]
For example:
UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/

3. To read and load a file from an ZFS formatted partition to RAM, execute
zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
For example:
UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage

References :
-- ZFS GRUB sources from Solaris GRUB-0.97
-- GRUB Bazaar repository

Jorgen Lundman <lundman at lundman.net> 2012.