Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
879 Commits
3 Branches
0 Tags
148 MiB
 
 
 
 
 
 
Tag: Branch: Tree: 20a80418f9
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '20a80418f9'
${ noResults }
u-boot/board/siemens/SCM/scm.c

540 lines
19 KiB
Raw Blame History

/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
#include "scm.h"
static void config_scoh_cs(void);
extern int fpga_init(void);
#if 0
#define DEBUGF(fmt,args...) printf (fmt ,##args)
#else
#define DEBUGF(fmt,args...)
#endif
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */
/* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */
/* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */
/* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */
/* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */
/* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */
/* PA25 */ { 0, 0, 0, 1, 0, 0 },
/* PA24 */ { 0, 0, 0, 1, 0, 0 },
/* PA23 */ { 0, 0, 0, 1, 0, 0 },
/* PA22 */ { 0, 0, 0, 1, 0, 0 },
/* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */
/* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */
/* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */
/* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */
/* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */
/* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1]*/
/* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */
/* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */
/* PA13 */ { 0, 0, 0, 1, 0, 0 },
/* PA12 */ { 0, 0, 0, 1, 0, 0 },
/* PA11 */ { 0, 0, 0, 1, 0, 0 },
/* PA10 */ { 0, 0, 0, 1, 0, 0 },
/* PA9 */ { 1, 1, 1, 1, 0, 0 }, /* TDM_A1 L1TXD0 */
/* PA8 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RXD0 */
/* PA7 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1TSYNC */
/* PA6 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RSYNC */
/* PA5 */ { 1, 0, 0, 0, 0, 0 }, /* FIOX_FPGA_PR */
/* PA4 */ { 1, 0, 0, 0, 0, 0 }, /* DOHM_FPGA_PR */
/* PA3 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK4 */
/* PA2 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK4 */
/* PA1 */ { 0, 0, 0, 1, 0, 0 },
/* PA0 */ { 1, 0, 0, 0, 0, 0 } /* BUSY */
},
/* Port B configuration */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MIN */
/* PB30 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MAJ */
/* PB29 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MIN */
/* PB28 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MAJ */
/* PB27 */ { 0, 1, 0, 0, 0, 0 },
/* PB26 */ { 0, 1, 0, 0, 0, 0 },
/* PB25 */ { 1, 0, 0, 1, 0, 0 }, /* LED_GREEN_L */
/* PB24 */ { 1, 0, 0, 1, 0, 0 }, /* LED_RED_L */
/* PB23 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TXD */
/* PB22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RXD */
/* PB21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TSYNC */
/* PB20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RSYNC */
/* PB19 */ { 1, 0, 0, 0, 0, 0 }, /* UID */
/* PB18 */ { 0, 1, 0, 0, 0, 0 },
/* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */
/* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */
/* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */
/* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */
/* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */
/* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */
/* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */
/* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */
/* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */
/* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */
/* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */
/* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */
/* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */
/* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
},
/* Port C configuration */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK1 */
/* PC30 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK1 */
/* PC29 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK3 */
/* PC28 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK3 */
/* PC27 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK2 */
/* PC26 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK2 */
/* PC25 */ { 0, 0, 0, 1, 0, 0 },
/* PC24 */ { 0, 0, 0, 1, 0, 0 },
/* PC23 */ { 0, 1, 0, 1, 0, 0 },
/* PC22 */ { 0, 1, 0, 0, 0, 0 },
/* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */
/* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */
/* PC19 */ { 0, 1, 0, 0, 0, 0 },
/* PC18 */ { 0, 1, 0, 0, 0, 0 },
/* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_CLK */
/* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII TX_CLK */
/* PC15 */ { 0, 0, 0, 1, 0, 0 },
/* PC14 */ { 0, 1, 0, 0, 0, 0 },
/* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* RES_PHY_L */
/* PC12 */ { 0, 0, 0, 1, 0, 0 },
/* PC11 */ { 0, 0, 0, 1, 0, 0 },
/* PC10 */ { 0, 0, 0, 1, 0, 0 },
/* PC9 */ { 0, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TSYNC */
/* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* FEP_RDY */
/* PC7 */ { 0, 0, 0, 0, 0, 0 },
/* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* UC4_ALARM_L */
/* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* UC3_ALARM_L */
/* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* UC2_ALARM_L */
/* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* RES_MISC_L */
/* PC2 */ { 0, 0, 0, 1, 0, 0 }, /* RES_OH_L */
/* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* RES_DOHM_L */
/* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* RES_FIOX_L */
},
/* Port D configuration */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
/* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_F */
/* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_F */
/* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_D */
/* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_D */
/* PD25 */ { 0, 0, 0, 1, 0, 0 },
/* PD24 */ { 0, 0, 0, 1, 0, 0 },
/* PD23 */ { 0, 0, 0, 1, 0, 0 },
/* PD22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TXD */
/* PD21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RXD */
/* PD20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RSYNC */
/* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPISEL */
/* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPICLK */
/* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSI */
/* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSO */
#if defined(CONFIG_SOFT_I2C)
/* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */
/* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */
#else
#if defined(CONFIG_HARD_I2C)
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
#else /* normal I/O port pins */
/* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */
#endif
#endif
/* PD13 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TXD */
/* PD12 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RXD */
/* PD11 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TSYNC */
/* PD10 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RSYNC */
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
/* PD7 */ { 0, 0, 0, 1, 0, 1 },
/* PD6 */ { 0, 0, 0, 1, 0, 1 },
/* PD5 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_F */
/* PD4 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_D */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
}
};
/* ------------------------------------------------------------------------- */
/* Check Board Identity:
*/
int checkboard (void)
{
unsigned char str[64];
int i = getenv_r ("serial#", str, sizeof (str));
puts ("Board: ");
if (!i || strncmp (str, "TQM8260", 7)) {
puts ("### No HW ID - assuming TQM8260\n");
return (0);
}
puts (str);
putc ('\n');
return 0;
}
/* ------------------------------------------------------------------------- */
/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
*
* This routine performs standard 8260 initialization sequence
* and calculates the available memory size. It may be called
* several times to try different SDRAM configurations on both
* 60x and local buses.
*/
static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
ulong orx, volatile uchar * base)
{
volatile uchar c = 0xff;
volatile uint *sdmr_ptr;
volatile uint *orx_ptr;
ulong maxsize, size;
int i;
/* We must be able to test a location outsize the maximum legal size
* to find out THAT we are outside; but this address still has to be
* mapped by the controller. That means, that the initial mapping has
* to be (at least) twice as large as the maximum expected size.
*/
maxsize = (1 + (~orx | 0x7fff)) / 2;
/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
* we are configuring CS1 if base != 0
*/
sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
*orx_ptr = orx;
/*
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
*
* "At system reset, initialization software must set up the
* programmable parameters in the memory controller banks registers
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
* system software should execute the following initialization sequence
* for each SDRAM device.
*
* 1. Issue a PRECHARGE-ALL-BANKS command
* 2. Issue eight CBR REFRESH commands
* 3. Issue a MODE-SET command to initialize the mode register
*
* The initial commands are executed by setting P/LSDMR[OP] and
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
* get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
for (i = 0; i < 8; i++)
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
*(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
size = get_ram_size((long *)base, maxsize);
*orx_ptr = orx | ~(size - 1);
return (size);
}
/*
* Test Power-On-Reset.
*/
int power_on_reset (void)
{
DECLARE_GLOBAL_DATA_PTR;
/* Test Reset Status Register */
return gd->reset_status & RSR_CSRS ? 0 : 1;
}
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
#ifndef CFG_RAMBOOT
long size8, size9;
#endif
long psize, lsize;
psize = 16 * 1024 * 1024;
lsize = 0;
memctl->memc_psrt = CFG_PSRT;
memctl->memc_mptpr = CFG_MPTPR;
#if 0 /* Just for debugging */
#define prt_br_or(brX,orX) do { \
ulong start = memctl->memc_ ## brX & 0xFFFF8000; \
ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF; \
printf ("\n" \
#brX " 0x%08x " #orX " 0x%08x " \
"==> 0x%08lx ... 0x%08lx = %ld MB\n", \
memctl->memc_ ## brX, memctl->memc_ ## orX, \
start, start+sizem, (sizem+1)>>20); \
} while (0)
prt_br_or (br0, or0);
prt_br_or (br1, or1);
prt_br_or (br2, or2);
prt_br_or (br3, or3);
#endif
#ifndef CFG_RAMBOOT
/* 60x SDRAM setup:
*/
size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
(uchar *) CFG_SDRAM_BASE);
size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR1_9COL,
(uchar *) CFG_SDRAM_BASE);
if (size8 < size9) {
psize = size9;
printf ("(60x:9COL - %ld MB, ", psize >> 20);
} else {
psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
(uchar *) CFG_SDRAM_BASE);
printf ("(60x:8COL - %ld MB, ", psize >> 20);
}
/* Local SDRAM setup:
*/
#ifdef CFG_INIT_LOCAL_SDRAM
memctl->memc_lsrt = CFG_LSRT;
size8 = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
(uchar *) SDRAM_BASE2_PRELIM);
size9 = try_init (memctl, CFG_LSDMR_9COL, CFG_OR2_9COL,
(uchar *) SDRAM_BASE2_PRELIM);
if (size8 < size9) {
lsize = size9;
printf ("Local:9COL - %ld MB) using ", lsize >> 20);
} else {
lsize = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
(uchar *) SDRAM_BASE2_PRELIM);
printf ("Local:8COL - %ld MB) using ", lsize >> 20);
}
#if 0
/* Set up BR2 so that the local SDRAM goes
* right after the 60x SDRAM
*/
memctl->memc_br2 = (CFG_BR2_PRELIM & ~BRx_BA_MSK) |
(CFG_SDRAM_BASE + psize);
#endif
#endif /* CFG_INIT_LOCAL_SDRAM */
#endif /* CFG_RAMBOOT */
icache_enable ();
config_scoh_cs ();
return (psize);
}
/* ------------------------------------------------------------------------- */
static void config_scoh_cs (void)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
volatile memctl8260_t *memctl = &immr->im_memctl;
volatile can_reg_t *can = (volatile can_reg_t *) CFG_CAN0_BASE;
volatile uint tmp, i;
/* Initialize OR3 / BR3 for CAN Bus Controller 0 */
memctl->memc_or3 = CFG_CAN0_OR3;
memctl->memc_br3 = CFG_CAN0_BR3;
/* Initialize OR4 / BR4 for CAN Bus Controller 1 */
memctl->memc_or4 = CFG_CAN1_OR4;
memctl->memc_br4 = CFG_CAN1_BR4;
/* Initialize MAMR to write in the array at address 0x0 */
memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
/* Initialize UPMA for CAN: single read */
memctl->memc_mdr = 0xcffeec00;
udelay (1); /* Necessary to have the data correct in the UPM array!!!! */
/* The read on the CAN controller write the data of mdr in UPMA array. */
/* The index to the array will be incremented automatically
through this read */
tmp = can->cpu_interface;
memctl->memc_mdr = 0x0ffcec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x0ffcec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x0ffcec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x0ffcec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x0ffcfc00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x0ffcfc00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0xfffdec07;
udelay (1);
tmp = can->cpu_interface;
/* Initialize MAMR to write in the array at address 0x18 */
memctl->memc_mamr = 0x18 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
/* Initialize UPMA for CAN: single write */
memctl->memc_mdr = 0xfcffec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x00ffec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x00ffec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x00ffec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x00ffec00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x00fffc00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x00fffc00;
udelay (1);
tmp = can->cpu_interface;
memctl->memc_mdr = 0x30ffec07;
udelay (1);
tmp = can->cpu_interface;
/* Initialize MAMR */
memctl->memc_mamr = MxMR_GPL_x4DIS; /* GPL_B4 ouput line Disable */
/* Initialize OR5 / BR5 for the extended EEPROM Bank0 */
memctl->memc_or5 = CFG_EXTPROM_OR5;
memctl->memc_br5 = CFG_EXTPROM_BR5;
/* Initialize OR6 / BR6 for the extended EEPROM Bank1 */
memctl->memc_or6 = CFG_EXTPROM_OR6;
memctl->memc_br6 = CFG_EXTPROM_BR6;
/* Initialize OR7 / BR7 for the Glue Logic */
memctl->memc_or7 = CFG_FIOX_OR7;
memctl->memc_br7 = CFG_FIOX_BR7;
/* Initialize OR8 / BR8 for the DOH Logic */
memctl->memc_or8 = CFG_FDOHM_OR8;
memctl->memc_br8 = CFG_FDOHM_BR8;
DEBUGF ("OR0 %08x BR0 %08x\n", memctl->memc_or0, memctl->memc_br0);
DEBUGF ("OR1 %08x BR1 %08x\n", memctl->memc_or1, memctl->memc_br1);
DEBUGF ("OR2 %08x BR2 %08x\n", memctl->memc_or2, memctl->memc_br2);
DEBUGF ("OR3 %08x BR3 %08x\n", memctl->memc_or3, memctl->memc_br3);
DEBUGF ("OR4 %08x BR4 %08x\n", memctl->memc_or4, memctl->memc_br4);
DEBUGF ("OR5 %08x BR5 %08x\n", memctl->memc_or5, memctl->memc_br5);
DEBUGF ("OR6 %08x BR6 %08x\n", memctl->memc_or6, memctl->memc_br6);
DEBUGF ("OR7 %08x BR7 %08x\n", memctl->memc_or7, memctl->memc_br7);
DEBUGF ("OR8 %08x BR8 %08x\n", memctl->memc_or8, memctl->memc_br8);
DEBUGF ("UPMA addr 0x0\n");
memctl->memc_mamr = 0x00 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
for (i = 0; i < 0x8; i++) {
tmp = can->cpu_interface;
udelay (1);
DEBUGF (" %08x ", memctl->memc_mdr);
}
DEBUGF ("\nUPMA addr 0x18\n");
memctl->memc_mamr = 0x18 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
for (i = 0; i < 0x8; i++) {
tmp = can->cpu_interface;
udelay (1);
DEBUGF (" %08x ", memctl->memc_mdr);
}
DEBUGF ("\n");
memctl->memc_mamr = MxMR_GPL_x4DIS;
}
/* ------------------------------------------------------------------------- */
int misc_init_r (void)
{
fpga_init ();
return (0);
}
/* ------------------------------------------------------------------------- */