upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
160 lines
3.6 KiB
160 lines
3.6 KiB
/*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <status_led.h>
|
|
|
|
/*
|
|
* The purpose of this code is to signal the operational status of a
|
|
* target which usually boots over the network; while running in
|
|
* PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
|
|
* message has been received, the LED is turned off. The Linux
|
|
* kernel, once it is running, will start blinking the LED again,
|
|
* with another frequency.
|
|
*/
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_STATUS_LED
|
|
|
|
typedef struct {
|
|
ulong mask;
|
|
int state;
|
|
int period;
|
|
int cnt;
|
|
} led_dev_t;
|
|
|
|
led_dev_t led_dev[] = {
|
|
{ STATUS_LED_BIT,
|
|
STATUS_LED_STATE,
|
|
STATUS_LED_PERIOD,
|
|
0,
|
|
},
|
|
#if defined(STATUS_LED_BIT1)
|
|
{ STATUS_LED_BIT1,
|
|
STATUS_LED_STATE1,
|
|
STATUS_LED_PERIOD1,
|
|
0,
|
|
},
|
|
#endif
|
|
#if defined(STATUS_LED_BIT2)
|
|
{ STATUS_LED_BIT2,
|
|
STATUS_LED_STATE2,
|
|
STATUS_LED_PERIOD2,
|
|
0,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
#define MAX_LED_DEV (sizeof(led_dev)/sizeof(led_dev_t))
|
|
|
|
static int status_led_init_done = 0;
|
|
|
|
static void status_led_init (void)
|
|
{
|
|
volatile immap_t *immr = (immap_t *)CFG_IMMR;
|
|
int i;
|
|
|
|
for (i=0; i<MAX_LED_DEV; ++i) {
|
|
led_dev_t *ld = &led_dev[i];
|
|
|
|
immr->STATUS_LED_PAR &= ~(ld->mask);
|
|
#ifdef STATUS_LED_ODR
|
|
immr->STATUS_LED_ODR &= ~(ld->mask);
|
|
#endif
|
|
#if (STATUS_LED_ACTIVE == 0)
|
|
if (ld->state == STATUS_LED_ON)
|
|
immr->STATUS_LED_DAT &= ~(ld->mask);
|
|
else
|
|
immr->STATUS_LED_DAT |= ld->mask ;
|
|
#else
|
|
if (ld->state == STATUS_LED_ON)
|
|
immr->STATUS_LED_DAT |= ld->mask ;
|
|
else
|
|
immr->STATUS_LED_DAT &= ~(ld->mask);
|
|
#endif
|
|
immr->STATUS_LED_DIR |= ld->mask ;
|
|
}
|
|
|
|
status_led_init_done = 1;
|
|
}
|
|
|
|
void status_led_tick (ulong timestamp)
|
|
{
|
|
volatile immap_t *immr = (immap_t *)CFG_IMMR;
|
|
int i;
|
|
|
|
if (!status_led_init_done)
|
|
status_led_init();
|
|
|
|
for (i=0; i<MAX_LED_DEV; ++i) {
|
|
led_dev_t *ld = &led_dev[i];
|
|
|
|
if (ld->state != STATUS_LED_BLINKING)
|
|
continue;
|
|
|
|
if (++(ld->cnt) >= ld->period) {
|
|
immr->STATUS_LED_DAT ^= ld->mask;
|
|
ld->cnt -= ld->period;
|
|
}
|
|
}
|
|
}
|
|
|
|
void status_led_set (int led, int state)
|
|
{
|
|
volatile immap_t *immr = (immap_t *)CFG_IMMR;
|
|
led_dev_t *ld;
|
|
|
|
if (led < 0 || led >= MAX_LED_DEV)
|
|
return;
|
|
|
|
if (!status_led_init_done)
|
|
status_led_init();
|
|
|
|
ld = &led_dev[led];
|
|
|
|
switch (state) {
|
|
default:
|
|
return;
|
|
case STATUS_LED_BLINKING:
|
|
ld->cnt = 0; /* always start with full period */
|
|
/* fall through */ /* always start with LED _ON_ */
|
|
case STATUS_LED_ON:
|
|
#if (STATUS_LED_ACTIVE == 0)
|
|
immr->STATUS_LED_DAT &= ~(ld->mask);
|
|
#else
|
|
immr->STATUS_LED_DAT |= ld->mask ;
|
|
#endif
|
|
break;
|
|
case STATUS_LED_OFF:
|
|
#if (STATUS_LED_ACTIVE == 0)
|
|
immr->STATUS_LED_DAT |= ld->mask ;
|
|
#else
|
|
immr->STATUS_LED_DAT &= ~(ld->mask);
|
|
#endif
|
|
break;
|
|
}
|
|
ld->state = state;
|
|
}
|
|
|
|
#endif /* CONFIG_STATUS_LED */
|
|
|