upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/fm/init.c

382 lines
9.5 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2011-2015 Freescale Semiconductor, Inc.
*/
#include <errno.h>
#include <common.h>
#include <asm/io.h>
#include <fdt_support.h>
#include <fsl_mdio.h>
#ifdef CONFIG_FSL_LAYERSCAPE
#include <asm/arch/fsl_serdes.h>
#else
#include <asm/fsl_serdes.h>
#endif
#include "fm.h"
struct fm_eth_info fm_info[] = {
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 1)
FM_DTSEC_INFO_INITIALIZER(1, 1),
#endif
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 2)
FM_DTSEC_INFO_INITIALIZER(1, 2),
#endif
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 3)
FM_DTSEC_INFO_INITIALIZER(1, 3),
#endif
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 4)
FM_DTSEC_INFO_INITIALIZER(1, 4),
#endif
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(1, 5),
#endif
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6)
FM_DTSEC_INFO_INITIALIZER(1, 6),
#endif
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7)
FM_DTSEC_INFO_INITIALIZER(1, 9),
#endif
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8)
FM_DTSEC_INFO_INITIALIZER(1, 10),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
FM_DTSEC_INFO_INITIALIZER(2, 1),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 2)
FM_DTSEC_INFO_INITIALIZER(2, 2),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 3)
FM_DTSEC_INFO_INITIALIZER(2, 3),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 4)
FM_DTSEC_INFO_INITIALIZER(2, 4),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(2, 5),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6)
FM_DTSEC_INFO_INITIALIZER(2, 6),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7)
FM_DTSEC_INFO_INITIALIZER(2, 9),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8)
FM_DTSEC_INFO_INITIALIZER(2, 10),
#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(1, 1),
#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
FM_TGEC_INFO_INITIALIZER(1, 2),
#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
FM_TGEC_INFO_INITIALIZER2(1, 3),
#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 4)
FM_TGEC_INFO_INITIALIZER2(1, 4),
#endif
#if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(2, 1),
#endif
#if (CONFIG_SYS_NUM_FM2_10GEC >= 2)
FM_TGEC_INFO_INITIALIZER(2, 2),
#endif
};
int fm_standard_init(bd_t *bis)
{
int i;
struct ccsr_fman *reg;
reg = (void *)CONFIG_SYS_FSL_FM1_ADDR;
if (fm_init_common(0, reg))
return 0;
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
if ((fm_info[i].enabled) && (fm_info[i].index == 1))
fm_eth_initialize(reg, &fm_info[i]);
}
#if (CONFIG_SYS_NUM_FMAN == 2)
reg = (void *)CONFIG_SYS_FSL_FM2_ADDR;
if (fm_init_common(1, reg))
return 0;
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
if ((fm_info[i].enabled) && (fm_info[i].index == 2))
fm_eth_initialize(reg, &fm_info[i]);
}
#endif
return 1;
}
/* simple linear search to map from port to array index */
static int fm_port_to_index(enum fm_port port)
{
int i;
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
if (fm_info[i].port == port)
return i;
}
return -1;
}
/*
* Determine if an interface is actually active based on HW config
* we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NONE if
* the interface is not active based on HW cfg of the SoC
*/
void fman_enet_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
phy_interface_t enet_if;
enet_if = fman_port_enet_if(fm_info[i].port);
if (enet_if != PHY_INTERFACE_MODE_NONE) {
fm_info[i].enabled = 1;
fm_info[i].enet_if = enet_if;
} else {
fm_info[i].enabled = 0;
}
}
return ;
}
void fm_disable_port(enum fm_port port)
{
int i = fm_port_to_index(port);
if (i == -1)
return;
fm_info[i].enabled = 0;
#ifndef CONFIG_SYS_FMAN_V3
fman_disable_port(port);
#endif
}
void fm_enable_port(enum fm_port port)
{
int i = fm_port_to_index(port);
if (i == -1)
return;
fm_info[i].enabled = 1;
fman_enable_port(port);
}
void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
{
int i = fm_port_to_index(port);
if (i == -1)
return;
fm_info[i].bus = bus;
}
void fm_info_set_phy_address(enum fm_port port, int address)
{
int i = fm_port_to_index(port);
if (i == -1)
return;
fm_info[i].phy_addr = address;
}
/*
* Returns the PHY address for a given Fman port
*
* The port must be set via a prior call to fm_info_set_phy_address().
* A negative error code is returned if the port is invalid.
*/
int fm_info_get_phy_address(enum fm_port port)
{
int i = fm_port_to_index(port);
if (i == -1)
return -1;
return fm_info[i].phy_addr;
}
/*
* Returns the type of the data interface between the given MAC and its PHY.
* This is typically determined by the RCW.
*/
phy_interface_t fm_info_get_enet_if(enum fm_port port)
{
int i = fm_port_to_index(port);
if (i == -1)
return PHY_INTERFACE_MODE_NONE;
if (fm_info[i].enabled)
return fm_info[i].enet_if;
return PHY_INTERFACE_MODE_NONE;
}
static void
__def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
enum fm_port port, int offset)
{
return ;
}
void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
enum fm_port port, int offset)
__attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
int ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
{
int off;
uint32_t ph;
phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
#ifndef CONFIG_SYS_FMAN_V3
u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS +
CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET;
#endif
off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
if (off == -FDT_ERR_NOTFOUND)
return -EINVAL;
if (info->enabled) {
fdt_fixup_phy_connection(blob, off, info->enet_if);
board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
return 0;
}
#ifdef CONFIG_SYS_FMAN_V3
#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
/*
* On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
* dual-role MAC, when FM1_10GEC1 is enabled and FM1_DTSEC9
* is disabled, ensure that the dual-role MAC is not disabled,
* ditto for other dual-role MACs.
*/
if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3))) ||
((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4))) ||
((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
#if (CONFIG_SYS_NUM_FMAN == 2)
||
((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) ||
((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2))) ||
((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) ||
((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
#endif
#else
/* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3))) ||
((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4))) ||
((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2))) ||
((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3))) ||
((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
#endif
)
return 0;
#endif
/* board code might have caused offset to change */
off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
#ifndef CONFIG_SYS_FMAN_V3
/* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
if (paddr != dtsec1_addr)
#endif
fdt_status_disabled(blob, off); /* disable the MAC node */
/* disable the fsl,dpa-ethernet node that points to the MAC */
ph = fdt_get_phandle(blob, off);
do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
"status", "disabled", strlen("disabled") + 1, 1);
return 0;
}
void fdt_fixup_fman_ethernet(void *blob)
{
int i;
#ifdef CONFIG_SYS_FMAN_V3
for (i = 0; i < ARRAY_SIZE(fm_info); i++)
ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
#else
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
/* Try the new compatible first.
* If the node is missing, try the old.
*/
if (fm_info[i].type == FM_ETH_1G_E) {
if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-dtsec"))
ft_fixup_port(blob, &fm_info[i],
"fsl,fman-1g-mac");
} else {
if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-xgec") &&
ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
ft_fixup_port(blob, &fm_info[i],
"fsl,fman-10g-mac");
}
}
#endif
}
/*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
*This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
*then set the correct PHY address
*/
void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
unsigned int port_num, int phy_base_addr)
{
unsigned int regnum = 0;
int qsgmii;
int i;
int phy_real_addr;
qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
if (!qsgmii)
return;
for (i = base_port; i < base_port + port_num; i++) {
if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
phy_real_addr = phy_base_addr + i - base_port;
fm_info_set_phy_address(i, phy_real_addr);
}
}
}
/*to check whether qsgmii riser card is used*/
int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
unsigned int port_num, unsigned regnum)
{
int i;
int val;
if (!bus)
return 0;
for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
if (val != MIIM_TIMEOUT)
return 1;
}
return 0;
}