upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Liu Gang 292dc6c501 powerpc/corenet_ds: Slave module for boot from SRIO ... For the powerpc processors with SRIO interface, boot location can be configured from SRIO1 or SRIO2 by RCW. The processor booting from SRIO can do without flash for u-boot image. The image can be fetched from another processor's memory space by SRIO link connected between them. The processor boots from SRIO is slave, the processor boots from normal flash memory space and can help slave to boot from its memory space is master. They are different environments and requirements: master: 1. NOR flash for its own u-boot image, ucode and ENV space. 2. Slave's u-boot image in master NOR flash. 3. Normally boot from local NOR flash. 4. Configure SRIO switch system if needed. slave: 1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV. 2. Boot location should be set to SRIO1 or SRIO2 by RCW. 3. RCW should configure the SerDes, SRIO interfaces correctly. 4. Slave must be powered on after master's boot. 5. Must define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE because of no ucode locally. For the slave module, need to finish these processes: 1. Set the boot location to SRIO1 or SRIO2 by RCW. 2. Set a specific TLB entry for the boot process. 3. Set a LAW entry with the TargetID SRIO1 or SRIO2 for the boot. 4. Slave's u-boot image should be generated specifically by make xxxx_SRIOBOOT_SLAVE_config. This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>		12 years ago
..
common	powerpc/corenet_ds: Slave module for boot from SRIO	12 years ago
corenet_ds	net: phy: make board_phy_config responsible for calling drv->config	12 years ago
m547xevb	…
m548xevb	…
m5208evbe	…
m5235evb	…
m5249evb	…
m5253demo	…
m5253evbe	…
m5271evb	…
m5272c3	…
m5275evb	…
m5282evb	…
m5329evb	…
m5373evb	…
m52277evb	…
m53017evb	…
m54451evb	…
m54455evb	…
mpc832xemds	…
mpc837xemds	…
mpc837xerdb	…
mpc5121ads	…
mpc7448hpc2	…
mpc8260ads	…
mpc8266ads	…
mpc8308rdb	…
mpc8313erdb	…
mpc8315erdb	…
mpc8323erdb	…
mpc8349emds	…
mpc8349itx	…
mpc8360emds	…
mpc8360erdk	…
mpc8536ds	…
mpc8540ads	…
mpc8541cds	…
mpc8544ds	net: phy: make board_phy_config responsible for calling drv->config	12 years ago
mpc8548cds	…
mpc8555cds	…
mpc8560ads	…
mpc8568mds	…
mpc8569mds	…
mpc8572ds	…
mpc8610hpcd	…
mpc8641hpcn	…
mx6qarm2	i.MX6: arm2: Add AXI cache and Qos setting	12 years ago
mx6qsabrelite	Prepare v2012.04-rc2; minor Coding Style cleanup	12 years ago
mx25pdk	…
mx28evk	…
mx31ads	…
mx31pdk	MX31: mx31pdk: drop enable_caches from board file	12 years ago
mx35pdk	MX35: mx35pdk: wrong board revision	12 years ago
mx51evk	mx51evk: Use gpio_direction_input prior to gpio_get_value	12 years ago
mx53ard	MX53: DDR: Fix ZQHWCTRL field TZQ_CS	12 years ago
mx53evk	MX53: DDR: Fix ZQHWCTRL field TZQ_CS	12 years ago
mx53loco	MX53: DDR: Fix ZQHWCTRL field TZQ_CS	12 years ago
mx53smd	MX53: DDR: Fix ZQHWCTRL field TZQ_CS	12 years ago
p1_p2_rdb	…
p1_p2_rdb_pc	powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards	12 years ago
p1010rdb	powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards	12 years ago
p1022ds	…
p1023rds	powerpc/p1023rds: Disable nor flash node and enable nand flash node	12 years ago
p2020come	…
p2020ds	…
p2041rdb	…
p3060qds	…